Skip to main content
. 2022 Aug 31;50(1):540–556. doi: 10.1002/mp.15926

TABLE 4.

Average value of differences between absorbed doses from experimental measurement and estimated by DPM, MCNP, and EGSnrc MC codes for the depth dose setup. The standard deviation in the dose rate is calculated across repeat measurements for each film depth

Experiment Repeat measurements Depth (mm) Experiment dose rate (μGy/GBq × s) DPM vs. Experiment (%) MCNP vs. Experiment (%) EGSnrc vs. Experiment (%)
Lu177DD,S,25.4 2 0.2032 132.1 ± 0.1 −8.0 −5.6 −5.9
0.4812 23.6 ± 0.1 −3.5 1.3 0.3
0.7592 8.9 ± 0.0 1.6 3.2 5.9
1.0372 7.2 ± 0.2 5.6 7.6 9.1
1.3152 6.6 ± 0.4 10.5 9.4 14.0
Y90DD,S,25.4 3 0.2032 3371.2 ± 237.6 2.2 3.4 3.5
0.4812 2601.4 ± 102.3 2.6 3.7 3.8
0.7592 2050.9 ± 34.4 2.7 4.0 4.0
1.0372 1614.3 ± 34.2 3.8 5.3 5.0
1.3152 1290.7 ± 25.8 3.2 4.8 4.4
1.5932 983.5 ± 24.5 7.6 9.4 8.6
1.8712 791.1 ± 16.3 5.8 7.5 6.6
2.1492 626.2 ± 20.7 4.9 6.9 5.4
2.4272 483.7 ± 11.5 5.6 8.0 6.2
2.7052 384.4 ± 14.3 1.8 5.3 3.4