Skip to main content
. Author manuscript; available in PMC: 2024 May 1.
Published in final edited form as: J Mech Behav Biomed Mater. 2023 Mar 6;141:105749. doi: 10.1016/j.jmbbm.2023.105749

Figure 1.

Figure 1.

Illustration of the experimental procedure. (A) Preparation of the elastomer mixture by combining the two Parts and adding μBeads; (B) The material is injected into a custom-designed molding system consisting of two plates that are tightly closed by a set of screws and nuts; (C) Samples are scanned under HR-μCT to visualize the μBeads in the polymer matrix and perform morphometry analyses; (D) Samples are tested using the BiMATs tensile machine detailed in (Corti, Shameen, et al., 2022a).