Table 9.
Percent differences in thermal characteristics (with original units provided) between the annealed and as-printed specimens for each filament for both the optimal and worst-case parameter sets.
| Parameter Set | (%) | Tg (°C) | Tcc (°C) | Tm (°C) | ||
|---|---|---|---|---|---|---|
| OVERTURE | White | Optimal | −86.52% | −6.50% | −3.25% | −0.52% |
| Worst-Case | 37.66% | −6.56% | −8.36% | −0.26% | ||
| Black | Optimal | −76.48% | −5.36% | 0.95% | −1.80% | |
| Worst-Case | −28.91% | −5.45% | −0.40% | −0.02% | ||
| Green | Optimal | 33.97% | −5.10% | 0.73% | 0.97% | |
| Worst-Case | 72.36% | −7.16% | −1.17% | −0.25% | ||
| SUNLU | White | Optimal | 44.39% | −4.53% | −6.61% | −0.99% |
| Worst-Case | −85.29% | −2.45% | −6.83% | −0.40% | ||
| Black | Optimal | 128.82% | −5.45% | 7.33% | −1.68% | |
| Worst-Case | 129.96% | −5.24% | 7.60% | −0.94% | ||
| Green | Optimal | 144.14% | −4.62% | −2.67% | −1.15% | |
| Worst-Case | 123.31% | −3.38% | 0.22% | −0.10% | ||
| HATCHBOX | White | Optimal | 21.85% | −2.39% | −4.36% | 3.65% |
| Worst-Case | −88.56% | 2.39% | −3.51% | −1.31% | ||
| Black | Optimal | 38.11% | −2.46% | −4.65% | −1.55% | |
| Worst-Case | 85.72% | −2.00% | −5.60% | −1.41% | ||
| Green | Optimal | 78.79% | −4.34% | −4.71% | −1.44% | |
| Worst-Case | 86.01% | −1.51% | −3.85% | −0.89% |