Table 1. Summary of the HER Performance of Rhenium-Based Sulfides.
| system | mass loading (mg cm–2) | mass activity (A g–1) | overpotential (η10 in mV at 10 mA cm–2a) | Tafel slope (mV dec–1) | ref |
|---|---|---|---|---|---|
| IF-RexMo1–xS2 | 0.707 | 14.14 | 677 | 136 | (134) |
| Re0.04Mo0.96S2 | 0.285 | 35.09 | 382 | 180 | (133) |
| Re0.55Mo0.45S2 | 0.285 | 35.09 | 147 | 56 | |
| Re0.75Mo0.25S2 | 0.285 | 35.09 | 365 | 136 | |
| Re-doped MoS2 | 0.285 | 35.09 | 210 | 78 | (130) |
| Mo0.5Re0.5S | 0.39 | 25.64 | 98 | 54 | (131) |
| ReS2 | 336 | (138) | |||
| ReS2/Au | 2.3 | 4.340 | 100 | 84 | (139) |
| ReS2 nanosheets | 498 | 136 | (140) | ||
| Bulk ReS2 | 639 | 161 | |||
| ReS2 | 360 | 142 | (141) | ||
| ReSe2 | 430 | 230 | |||
| ReS2 exf | 530 | 115 | |||
| ReSe2 exf | 630 | 130 | |||
| Re/ReS2-7H/CC | 0.378 | 26.45 | 42 | 36 | (142) |
| ReS2/CSW-700 °C | 357 | 304 | (143) | ||
| ReS2/CSW-750 °C | 260 | 189 | |||
| ReS2/CSW-800 °C | 299 | 193 | |||
| 2D-Re–ReS2 | 147 | 69 | (144) | ||
| ReS2 | 223 | 151 | |||
| 3D-ReS2 | 1.83 | 5.460 | 413 | 195 | (145) |
| 2D-ReS2 | 1.67 | 5.980 | 288 | 147 | |
| Mo/ReS2@CA/CC | 2.1 | 4.760 | 101 | 40 | (146) |
| ReS2 | 0.34 | 29.41 | 395 | 178 | (147) |
| ReS2-F5.93 | 142 | 64 | |||
| Fe-ReS2@N-CNF-5 | 1 | 10.00 | 242 | 63 | (148) |
| ReS2 | 0.285 | 35.09 | 174 | 82 | (149) |
| 5% Mo-ReS2 | 130 | 64 | |||
| 10% Mo-ReS2 | 81 | 62 | |||
| 15% Mo-ReS2 | 147 | 84 | |||
| ReS2/rGO | 0.282 | 18.44 | 250 | 107 η5.2 | (150) |
| ReS2 | 250 | 152 η3.1 | |||
| ReS2/rGO | 0.13 | 76.92 | 148 | 67 | (151) |
| ReS2/ReO2 | 150 | 65 | (152) | ||
| Pt/NBF-ReS2/Mo2CTx | 0.56 | 17.85 | 29 | 24 | (153) |
a
Current density at which the overpotential was measured is explicitly mentioned when it differs from 10 mA cm–2.