Table 2. Parameters Varied in Sensitivity Analyses and Base Case Simulations.

set of simulations	close-range inspection data sets, which are then combined with the flyover data set	fraction of sites with emissions from close-range inspections when combining close-range and flyover data sets at each Monte Carlo iteration	pLeaka	MTBF [days]a	MTTR [days]a
base case	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.71	tanks = 0.046; flares = 0.1	tanks = 1515; flares = 1435	tanks = 73; flares = 159
sensitivity analysis S0	Allen et al.,7 Bell et al.,22 Kuo et al.,23 Pacsi et al.,24 ERG,28 and Ravikumar et al.29c	0.71	tanks = 0.046; flares = 0.1	anks = 1515; flares = 1435	tanks = 73; flares = 159
sensitivity analysis S1	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.91	tanks = 0.046; flares = 0.1	anks = 1515; flares = 1435	tanks = 73; flares = 159
sensitivity analysis S2	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.51	tanks = 0.046; flares = 0.1	anks = 1515; flares = 1435	tanks = 73; flares = 159
sensitivity analysis S3	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.71	tanks = 0.046; flares = 0.1	tanks = 103.7; flares = 45	tanks & flares = 5
sensitivity analysis S4	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.71	tanks = 0.046; flares = 0.1	tanks = 207.4; flares = 90	tanks & flares = 10
sensitivity analysis S5	Allen et al.,7 Bell et al.,22 Kuo et al.,23 and Pacsi et al.24b	0.71	tanks = 0.046; flares = 0.1	tanks = 622.2; flares = 270	tanks & flares = 30

^aAll sets of simulations use the pLeak, MTBF, and MTTR parameters specified in Table 1 for: valves, connectors, open ended lines, pressure relief valves, flanges, and other components.

^bEmissions assigned based on equipment type from measurements for all sources.

^cEmissions assigned independently of equipment type from measurements except for tanks and flares.