Table 1.
Parameters of the electrospinning/electrospraying.
| Process | No. | Fluid Flow Rate (mL/h) | Applied Voltage (kV) |
Collecting Distance (cm) |
Shape/ Structure |
||
|---|---|---|---|---|---|---|---|
| Core 1 | Middle 2 | Sheath 3 | |||||
| Electrospraying | P1 | - | - | 0.6 | 9.5 | 15 | Particles/ Monolithic |
| Single | F1 | 0.6 | - | - | 6 | Linear/ Monolithic |
|
| Coaxial | F2 | 0.6 | - | 0.2 | Linear/ Core–sheath |
||
| F3 | 0.6 | - | 0.4 | ||||
| F4 | 0.6 | - | 0.6 | ||||
| Triaxial | F5 | 0.6 | 0.2 | 0.2 | 20 | BOTS 4/ Core–sheath |
|
| F6 | 0.6 | 0.2 | 0.4 | ||||
| F7 | 0.6 | 0.2 | 0.6 | ||||
1 The core fluid is 5% PEO–0.5% CUR. 2 The middle fluid is ethanol. 3 The sheath fluid is 30% shellac. 4 BOTS represent beads-on-the-string.