Table 2.

Fixed process parameters for FFF in 3D printing.

Printing parameters	Value
Nozzle diameter	0.4 mm
Initial layer height	0.27 mm
Line width	0.35 mm
Wall line width	0.35 mm
Outer wall line width	0.35 mm
Inner wall line width	0.30 mm
Top/Bottom line width	0.35 mm
Infill line width	0.4 mm
Wall thickness	1 mm
Wall line count	3
Top/Bottom thickness	1.2 mm
Printing temperature	200 °C
Build plate temperature	55 °C
Print speed	60 mm/s
Filament Flow	100%
Enable retraction	Yes
Travel speed	80 mm/s
Raster orientation	[0°]
Printing orientation	Flat [y-z]
Enable cooling	Yes