Skip to main content
. 2023 May 23;9(6):e16531. doi: 10.1016/j.heliyon.2023.e16531

Table 5.

Tensile strength of samples.

Sample IDs Control factors
Ultimate tensile strength (N/mm2) Yield strength (N/mm2) % Elongation
A B C
S1 Line 75 100 15.40 11.43 9.29
S2 Line 80 200 17.46 13.63 10.39
S3 Line 85 300 15.99 13.00 13.12
S4 Triangle 75 200 18.44 18.46 7.65
S5 Triangle 80 300 18.05 15.78 8.53
S6 Triangle 85 100 16.87 15.13 5.44
S7 Concentric 75 300 27.08 14.20 15.66
S8 Concentric 80 100 38.95 30.07 8.46
S9 Concentric 85 200 28.25 20.83 7.87