. 2023 Jul 21;13:11788. doi: 10.1038/s41598-023-38653-1

Table 1.

Sensitivity analysis of the input parameters for the baseline configuration of $N_{i} = 80$ , $N_{a} = 80$ , $L_{rate} = 25$ , $l_{d} = 10$ mm, $L_{error} = 2$ ms.

Parameters	Values	RMSE (ms)	Total execution time (min)
$N_{i}$	20	0.95 ± 0.31	1.81 ± 0.30
$N_{i}$	400	0.95 ± 0.31	5.80 ± 0.54
$N_{a}$	20	1.20 ± 0.42	1.55 ± 0.12
$N_{a}$	400	0.86 ± 0.22	6.68 ± 1.75
$L_{rate}$	10	0.95 ± 0.33	2.85 ± 0.55
$L_{rate}$	40	0.91 ± 0.32	2.36 ± 0.17
$l_{d}$	5 mm	1.10 ± 0.66	3.39 ± 0.34
$l_{d}$	15 mm	1.18 ± 0.43	1.69 ± 0.15
$L_{error}$	1 ms	0.90 ± 0.33	2.54 ± 0.32
$L_{error}$	5 ms	1.30 ± 1.06	2.56 ± 0.32
Baseline	–	$0.95 \pm 0.31$	$2.50 \pm 0.31$

The mean and standard deviation of the RMSE (milliseconds) at the PVJ sites and the total execution time (minutes) to generate the networks are listed.