Table 3.

Defined parameters of test 2 with fluid density of ${\mathrm{\rho }}_2\simeq 1160\left(\mathrm{k}\mathrm{g}/{\mathrm{m}}^3\right)$, tenth seconds of test (T1) and 5 s after the test (T2).

P (bar)	V (m/s)	Parameters	Nozzle Diameter 0.5 mm – Salt Water
			T1		T2
			$K/Dc$	$S/Dc$	$K/Dc$	$S/Dc$
1.2	7.7	Mean	0.095	0.354	$\simeq$ 0	$\simeq$ 0
		Stand. deviation	0.0059	0.028	$-$	$-$
2.5	12	Mean	0.145	0.546	$\simeq$ 0	$\simeq$ 0
		Stand. deviation	0.0115	0.038	$-$
3.6	15.2	Mean	0.180	0.677	$\simeq$ 0	$\simeq$ 0
		Stand. deviation	0.0081	0.066	$-$	$-$
4.4	17	Mean	0.209	0.762	$\simeq$ 0	$\simeq$ 0
		Stand. deviation	0.0211	0.043	$-$	$-$
5.2	18.5	Mean	0.234	0.841	0.06	0.3
		Stand. deviation	0.0175	0.098	$-$	$-$
6.6	21.6	Mean	0.268	0.968	0.09	0.3
		Stand. deviation	0.0146	0.082	$-$	$-$
7.9	24	Mean	0.297	1.077	0.11	0.4
		Stand. deviation	0.0241	0.061	$-$	$-$
9.1	26	Mean	0.323	1.171	0.12	0.4
		Stand. deviation	0.0145	0.086	$-$	$-$