Table 5.
Graphic representation of the results of FDGD for cases of orthognathic and trauma surgery according to the variation of specified constructive parameters.
| Maxilla Le Fort I | Blend radius (min = 5, max = 20) | Blend radius (min = 8, max = 20) |
|---|---|---|
|
Mean computational time: 5 s Export time: 1 m 35 s Number of points provided: 20 Blend type: sharp Hole radius: 1 mm Flange size: 0.5 mm Flange depth: 0.5 mm |
 |
 |
| Mandible BSSO (right) | Blend radius (min = 12, max = 20) | Blend radius (min = 20, max = 20) |
|
Mean computational time: 3 s Export time: 23 s Number of points provided: 8 Blend type: sharp Hole radius: 1 mm Flange size: 0.5 mm Flange depth: 0.5 mm |
 |
 |
| Mandible BSSO (left) | Blend radius (min = 12, max = 20) | Blend radius (min = 20, max = 20) |
|
Mean computational time: 3 s Export time: 20 s Number of points provided: 8 Blend type: sharp Hole radius: 1 mm Flange size: 0.5 mm Flange depth: 0.5 mm |
 |
 |
| Genioplasty | Blend radius (min = 9, max = 20) | Blend radius (min = 12, max = 20) |
|
Mean computational time: 2 s Export time: 10 s Number of points provided: 6 Blend type: sharp Hole radius: 1 mm Flange size: 0.5 mm Flange depth: 0.5 mm |
 |
 |
|
Mean computational time: 15 s Export time: 5 m 45 s Number of points provided: 28 Blend type: sharp Flange size: 0.5 mm Flange depth: 0.5 mm |
Hole size = 1 mm | Hole size = 2 mm |
 |
 |
|
|
Mean computational time: 16 s Export time: 5 m 55 s Number of points provided: 28 Blend type: sharp Flange size: 0.5 mm Flange depth: 0.5 mm |
Plate thickness = 0.6 mm | Plate thickness = 1.5 mm |
 |
 |
The same table reports the standardized parameters used for the selected cases.