Table 5. Mechanical properties of the 3D-printed MED610.

Parameters	Mechanical properties
	Tensile strength (MPa)	Young’s modulus (MPa)	Elongation at yield (%)	Elongation at break (%)
Control	26.26 ± 4.30	1375 ± 168	1.92 ± 0.15	8.82 ± 1.90
HPO	26.43 ± 0.82	1341 ± 43	1.92 ± 0.16	12.95 ± 3.55
AU121	21.69 ± 2.71	1201 ± 76	1.93 ± 0.19	12.14 ± 2.10
AU134	30.74 ± 2.75	1380 ± 145	1.33 ± 0.67	6.04 ± 5.55

Data are represented as mean ± SD. N = 3 MED610 Control/group; N = 3 MED610 HPO/group; N = 3 MED610 AU121/group; N = 3 MED610 AU134/group.