Table 6. Mechanical properties of the 3D-printed VERO.

Parameters	Mechanical properties
	Tensile strength (MPa)	Young’s modulus (MPa)	Elongation at yield (%)	Elongation at break (%)
Control	31.32 ± 2.25	1492 ± 175	1.92 ± 0.14	14.16 ± 4.55
HPO	36.07 ± 4.73	1818 ± 224	1.87 ± 0.05	15.38 ± 2.72
AU121	29.16 ± 1.49	1502 ± 254	1.31 ± 1.11	12.29 ± 4.96
AU134	30.26 ± 3.02	1380 ± 137	1.97 ± 0.07	11.69 ± 2.90

Data are represented as mean ± SD. N = 3 VERO Control/group; N = 3 VERO HPO/group; N = 3 VERO AU121/group; N = 3 VERO AU134/group.