Table 7. Mechanical properties of the 3D-printed Surgical Guide resin.

Parameters	Mechanical properties
	Tensile strength (MPa)	Young’s modulus (MPa)	Elongation at yield (%)	Elongation at break (%)
Control	57.60 ± 6.32	2154 ± 278	1.89 ± 0.93	6.23 ± 0.90
HPO	57.23 ± 4.31	2248 ± 726	1.46 ± 0.65	5.45 ± 2.69
AU121	67.01 ± 11.28	2303 ± 140	1.31 ± 0.48	5.48 ± 1.13
AU134	42.34 ± 12.06	3834 ± 952	0.39 ± 0.62	2.04 ± 0.65

Data are represented as mean ± SD. N = 3 Surgical Guide resin Control/group; N = 3 Surgical Guide resin HPO/group; N = 3 Surgical Guide resin AU121/group; N = 3 Surgical Guide resinAU134/group.