Table 8. Mechanical properties of the 3D-printed Durable.

Parameters	Mechanical properties
	Tensile strength (MPa)	Young’s modulus (MPa)	Elongation at yield (%)	Elongation at break (%)
Control	18.46 ± 0.36	673 ± 37	15.39 ± 13.27	23.92 ± 0.60
HPO	17.83 ± 0.24	665 ± 54	16.27 ± 14.02	20.16 ± 7.47
AU121	17.67 ± 0.55	685 ± 65	15.98 ± 13.92	25.38 ± 2.86
AU134	15.73 ± 0.09	659 ± 36	20.83 ± 5.43	21.15 ± 5.37

Data are represented as mean ± SD. N = 3 Durable Control/group; N = 3 Durable HPO/group; N = 3 Durable AU121/group; N = 3 Durable AU134/group.