. 2023 Aug 23;16(17):5769. doi: 10.3390/ma16175769

Table 2.

Homogeneous and island coarse coatings on cathode materials and the effects of coating modification on battery properties [47].

Morphology	Technique	Cathode Materials	Coating	Capacity (mAh·g⁻¹)/Retention Rate (%) (Rate C/Cycle Times)		Ref.
Morphology	Technique	Cathode Materials	Coating	Before Coating	After Coating	Ref.
Homogeneous coating	Gas phase chemical coating	Li_1.2Mn_0.54Ni_0.13Co_0.13O₂	Al₂O₃	251–232/92.43% 0.05 C/30	271–257/94.83% 0.05 C/30	[48]
		NCM523	ZrO₂	216–84/40% 0.03 C/100	228–182/83.25% 0.03 C/100	[49]
		Li_1.17Mn_0.48Ni_0.23Co_0.12O₂	MgO	240–234/97.9% 0.1 C/10	260–258/99.55% 0.1 C/10	[50]
Island coarse coating	Dry coating	LiNi_0.815Co_0.15Al_0.035O₂	Li₃PO₄	195–139/70.55% 1 C/100	192–171/89.06% 1 C/100	[51]
	Dry coating	NCM525	Li₂MoO₄	186–97 48% 0.2 C/50	178–138 78% 0.2 C/50	[52]
	Wet coating	Li[Li_0.05Ni_0.4Co_0.15Mn_0.4]O₂	Al₂O₃	155–133/86% 1 C/50	157–150.7/96% 1 C/50	[44]
	Wet coating	NMC532	Li₃PO₄	135–44/32.59% 1 C/100	214–189/88.32% 1 C/100	[53]