Table 1.
Mass proportion of additives and values of measured properties of HDPE/EG/mBN composite.
| Run | HDPE wt.% | Factor A: EG wt.% |
Factor B: mBN wt.% |
Thermal Conductivity λ (W/mK) | Tensile Strength σm (MPa) | Tensile Modulus E (MPa) | Strain at Yield εy
(%) |
|---|---|---|---|---|---|---|---|
| 1 | 80 | 5 | 15 | 1.21 ± 0.01 | 18.84 ± 1.04 | 1072 ± 98 | 4.90 ± 1.13 |
| 2 | 70 | 8 | 22 | 1.96 ± 0.14 | 19.65 ± 0.75 | 1601 ± 192 | 2.91 ± 0.40 |
| 3 | 70 | 15 | 15 | 1.96 ± 0.13 | 23.45 ± 0.48 | 1723 ± 244 | 4.94 ± 0.34 |
| 4 | 60 | 25 | 15 | 1.26 ± 0.04 | 23.85 ± 0.99 | 1915 ± 324 | 2.65 ± 0.51 |
| 5 | 20 | 15 | 5 | 1.69 ± 0.10 | 20.84 ± 1.01 | 1149 ± 181 | 5.92 ± 1.2 |
| 6 | 84 | 8 | 8 | 1.21 ± 0.06 | 19.58 ± 1.95 | 1164 ± 219 | 5.71 ± 1.51 |
| 7 | 70 | 15 | 15 | 2.39 ± 0.17 | 20.13 ± 2.65 | 1548 ± 152 | 2.86 ± 0.95 |
| 8 | 60 | 15 | 25 | 0.24 ± 0.00 | 24.37 ± 3.76 | 2153 ± 404 | 2.65 ± 0.28 |
| 9 | 56 | 22 | 22 | 3.01 ± 0.08 | 23.06 ± 1.77 | 2087 ± 306 | 1.85 ± 0.23 |
| 10 | 70 | 15 | 15 | 2.03 ± 0.06 | 21.86 ± 1.16 | 1593 ± 154 | 3.63 ± 0.75 |
| 11 | 70 | 22 | 8 | 1.91 ± 0.07 | 22.55 ± 1.58 | 1687 ± 233 | 3.34 ± 0.4 |
| / | 100 | / | / | 0.37 ± 0.003 | 25.58 ± 0.99 | 1104 ± 84 | 8.52 ± 0.83 |
The underlined values apply only to the implementation of the analysis of these individual properties, and not for all analyzed properties.