Table 2.
Pin breakout names and descriptions.
| Pin # | Name | Description |
|---|---|---|
| 1 | GND | System ground and reference |
| 2 | +12 V | Voltage from loaf supply |
| 3 | I2C_CLK | Clock signal for communication between the slice and loaf |
| 4 | I2C_DAT | Data signal for communication between the slice and loaf |
| 5 | GND | System ground and reference |
| 6 | E_STOP | Signal (driven by loaf) which goes through physical interlocks acting as an E-Stop |
| 7 | INT | Interrupt pin (driven by slice) used to indicate to loaf that special attention is needed |
| 8 | SYNC | Digital signal (driven by loaf) used to synchronize actions across multiple slices |
| 9 | +12 V | Voltage from loaf supply |
| 10 | GND | System ground and reference |