Skip to main content
. 2023 Sep 26;13:16082. doi: 10.1038/s41598-023-43299-0

Figure 1.

Figure 1

Schematics of dual-transducer USWF system and sample holder. (A,B) A plastic tank was constructed to hold ultrasound transducers at four locations (sites 1–4). Activation of two transducers simultaneously will produce an USWF at the location of the intersecting beams. (A) 3D and (B) top-down illustrations of the tank are shown. (C,D) Hexagonal sample holders with dimensions of 1.2 × 6 × 0.2 cm (w × l × t) were constructed from TPX plastic. (C) 3D and (D) top-down illustrations are shown. Location of the sample holder within the exposure tank is shown in (B).