Table 3. Output Performance of Non-Bioresorbable TENGs115,243,258−267.
| output
power (peak to peak) |
||||||
|---|---|---|---|---|---|---|
| no. | triboelectric layers | active area (cm2) | voltage (V) | current | working mode | ref |
| 1 | PTFE, Al/Cu | 100 | 7540 | 20.1 A | contact-separation | (259) |
| 2 | PTFE, Al | 0.49 | 7000 | 37 μA | contact-separation | (260) |
| 3 | silicone rubber, nitrile rubber | 78.5 | 5000 | 15.7 mA | single electrode | (261) |
| 4 | P(VDF-TrFE):BTO, Al | 9 | 1130 | 1.5 mA | contact-separation | (258) |
| 5 | PFA, ZnO@MOP/PVP | 4 | 534 | 26.8 μA | contact-separation | (262) |
| 6 | PDMS-CNT, Al | 4 | 338.25 | 19.91 μA | contact-separation | (263) |
| 7 | PVDF-ZnO NWs, Nylon-ZnO NWs | 10 | 330 | 10 μA | contact-separation | (243) |
| 8 | PTFE, PAN@ZIF-8 | 4 | 260 | 24.5 μA | contact-separation | (264) |
| 9 | PTFE yarns, PA66 yarns | 3.25 | 232 | 6.8 μA | contact-separation | (265) |
| 10 | FEP, Ag nanoparticles | 12 | 200 | 20 μA | contact-separation | (266) |
| 11 | PA(polyamide), Al | 8.75 | 150 | 10 μA | single electrode | (115) |
| 12 | nanostructured PI, Cu | 2 | 109 | 2.73 μA | contact-separation | (267) |