Table 1.
Wool Trait 1 | Variant Assessed | Absent | Present | P 3 | ||
---|---|---|---|---|---|---|
Mean ± SE 2 | n | Mean ± SE | n | |||
GFW (kg) |
A | 2.5 ± 0.16 | 38 | 2.4 ± 0.14 | 210 | 0.124 |
B | 2.4 ± 0.15 | 109 | 2.4 ± 0.14 | 139 | 0.295 | |
C | 2.4 ± 0.15 | 204 | 2.5 ± 0.17 | 44 | 0.255 | |
CFW (kg) |
A | 1.9 ± 0.15 | 38 | 1.8 ± 0.13 | 210 | 0.861 |
B | 1.8 ± 0.12 | 109 | 1.8 ± 0.12 | 139 | 0.647 | |
C | 1.8 ± 0.13 | 204 | 1.9 ± 0.15 | 44 | 0.575 | |
YIELD (%) |
A | 77.3 ± 2.44 | 38 | 74.2 ± 2.08 | 210 | 0.029 |
B | 74.7 ± 2.21 | 109 | 74.1 ± 2.18 | 139 | 0.632 | |
C | 74.9 ± 2.13 | 204 | 73.0 ± 2.43 | 44 | 0.233 | |
MSL (mm) |
A | 96.8 ± 4.86 | 38 | 97.6 ± 4.16 | 210 | 0.773 |
B | 97.4 ± 4.33 | 109 | 97.6 ± 4.28 | 139 | 0.915 | |
C | 97.4 ± 4.21 | 204 | 98.1 ± 4.75 | 44 | 0.805 | |
MSS (N/ktex) | A | 26.3 ± 3.50 | 38 | 27.0 ± 3.00 | 210 | 0.717 |
B | 27.1 ± 3.11 | 109 | 26.8 ± 3.08 | 139 | 0.848 | |
C | 25.9 ± 2.99 | 204 | 29.2 ± 3.37 | 44 | 0.070 | |
MFD (µm) |
A | 18.5 ± 0.55 | 38 | 18.3 ± 0.48 | 210 | 0.494 |
B | 18.2 ± 0.49 | 109 | 18.4 ± 0.48 | 139 | 0.322 | |
C | 18.1 ± 0.52 | 204 | 18.6 ± 0.52 | 44 | 0.237 | |
FDSD (µm) | A | 3.5 ± 0.22 | 38 | 3.5 ± 0.19 | 210 | 0.610 |
B | 3.5 ± 0.18 | 109 | 3.5 ± 0.18 | 139 | 0.628 | |
C | 3.5 ± 0.18 | 204 | 3.6 ± 0.20 | 44 | 0.386 | |
CVFD (%) |
A | 19.1 ± 0.97 | 38 | 19.0 ± 0.83 | 210 | 0.949 |
B | 19.4 ± 0.87 | 109 | 18.9 ± 0.86 | 139 | 0.182 | |
C | 19.1 ± 0.86 | 204 | 19.1 ± 0.95 | 44 | 0.997 | |
PF (%) |
A | 0.5 ± 0.51 | 38 | 0.7 ± 0.43 | 210 | 0.442 |
B | 0.8 ± 0.45 | 109 | 0.6 ± 0.44 | 139 | 0.596 | |
C | 0.6 ± 0.44 | 204 | 0.9 ± 0.50 | 44 | 0.428 | |
MFC (°/mm) | A | 72.1 ± 6.80 | 38 | 78.0 ± 5.78 | 210 | 0.128 |
B | 80.8 ± 5.99 | 109 | 74.9 ± 5.92 | 139 | 0.063 | |
C | 76.9 ± 5.89 | 204 | 80.1 ± 6.66 | 44 | 0.447 |
1 GFW—greasy fleece weight; CFW—clean fleece weight; YIELD—wool yield; MSL—mean staple length; MSS—mean staple strength; MFD—mean fibre diameter; FDSD—fibre diameter standard deviation; CVFD—coefficient of variation of fibre diameter; PF—prickle factor (percentage of fibres over 30 μm); MFC—mean fibre curvature. 2 Predicted means and standard errors of those means derived from the GLMs. 3 p values < 0.05 are in bold, and p values < 0.10 are italicised.