Table 2.

Physico-chemical parameters in the soil samples.

Sample ID	Sand (%)	Clay (%)	Silt (%)	Textural class	OC (%)	OM (%)	pH
1 M	71.08	4.08	24.84	Sandy loam	2.20	3.78	5.26
1R	89.16	4.08	6.76	Sand	2.20	3.78	5.20
1L	59.24	16.00	24.76	Sandy loam	0.68	1.17	5.13
2 M	84.60	6.00	9.40	Loamy sand	1.76	3.03	5.26
2R	74.64	4.00	21.36	Sandy loam	2.20	3.78	5.23
2L	73.00	14.12	12.88	Sandy loam	0.48	0.83	5.49
3 M	84.64	4.00	11.36	Loamy sand	2.20	3.78	5.40
3R	58.72	17.92	23.36	Sandy loam	2.83	4.88	5.49
3L	94.72	2.56	2.72	Sand	3.07	5.30	5.45
4 M	95.68	2.56	1.76	Sand	2.91	5.02	5.43
4R	85.52	2.56	11.92	Loamy sand	3.03	5.23	5.46
4L	87.68	4.56	7.76	Sand	3.31	5.71	5.49
5 M	93.52	3.84	2.64	Sand	2.39	4.13	5.75
5R	84.32	8.08	7.60	Loamy sand	1.36	2.34	5.64
5L	89.72	2.56	7.72	Sand	3.07	5.30	5.48
6 M	87.36	5.84	6.80	Loamy sand	3.43	5.92	5.61
6R	65.52	3.84	30.64	Sandy loam	0.96	1.65	5.52
6L	79.44	7.84	12.72	Loamy sand	2.39	4.13	5.71
7 M	86.80	4.08	9.12	Loamy sand	0.88	1.51	6.01
7R	89.16	4.04	6.80	Sand	0.76	1.31	5.79
7L	95.36	2.68	1.96	Sand	3.43	5.92	6.02
8 M	84.64	4.12	11.24	Loamy sand	2.27	3.92	5.36
8R	84.60	5.64	9.76	Loamy sand	2.67	4.61	5.11
8L	63.32	14.00	22.68	Sandy loam	2.27	3.92	5.77
9 M	82.60	5.64	11.76	Loamy sand	1.86	3.23	5.36
9R	84.76	6.04	9.20	Loamy sand	3.19	5.50	5.76
9L	82.64	6.32	11.04	Loamy sand	0.32	0.55	5.73
10 M	86.72	4.00	9.28	Loamy sand	2.99	5.16	5.54
10R	87.84	4.56	7.60	Loamy sand	2.0	3.44	5.82
10L	79.40	6.56	14.04	Loamy sand	1.48	2.55	5.51
Minimum Maximum Mean ± SE	58.72 95.68 82.21 ± 1.85	2.56 17.92 6.07 ± 0.74	1.76 30.64 11.72 ± 1.35		0.32 3.43 2.15 ± 0.17	0.55 5.92 3.71 ± 0.29	5.11 6.02 5.62 ± 0.04
Control	61.24	7.92	30.84	Sandy loam	2.20	3.78	5.62

Note: 1 M = Point 1 at middle, 1R = Point 1 at right, 1L = point 1 at left, OM= Organic matter, OC= Organic carbon.