Skip to main content
ACS AuthorChoice logoLink to ACS AuthorChoice
. 2023 Apr 4;39(15):5426–5439. doi: 10.1021/acs.langmuir.3c00091

Influence of Surface Roughness, Nanostructure, and Wetting on Bacterial Adhesion

Minchen Mu †, Shuhao Liu †, William DeFlorio †, Li Hao ‡, Xunhao Wang §, Karla Solis Salazar ∥, Matthew Taylor ∥, Alejandro Castillo ∥, Luis Cisneros-Zevallos ⊥, Jun Kyun Oh , Younjin Min §,*, Mustafa Akbulut †,*
PMCID: PMC10848269  PMID: 37014907

Abstract

graphic file with name la3c00091_0007.jpg

Bacterial fouling is a persistent problem causing the deterioration and failure of functional surfaces for industrial equipment/components; numerous human, animal, and plant infections/diseases; and energy waste due to the inefficiencies at internal and external geometries of transport systems. This work gains new insights into the effect of surface roughness on bacterial fouling by systematically studying bacterial adhesion on model hydrophobic (methyl-terminated) surfaces with roughness scales spanning from ∼2 nm to ∼390 nm. Additionally, a surface energy integration framework is developed to elucidate the role of surface roughness on the energetics of bacteria and substrate interactions. For a given bacteria type and surface chemistry; the extent of bacterial fouling was found to demonstrate up to a 75-fold variation with surface roughness. For the cases showing hydrophobic wetting behavior, both increased effective surface area with increasing roughness and decreased activation energy with increased surface roughness was concluded to enhance the extent of bacterial adhesion. For the cases of superhydrophobic surfaces, the combination of factors including (i) the surpassing of Laplace pressure force of interstitial air over bacterial adhesive force, (ii) the reduced effective substrate area for bacteria wall due to air gaps to have direct/solid contact, and (iii) the reduction of attractive van der Waals force that holds adhering bacteria on the substrate were summarized to weaken the bacterial adhesion. Overall, this study is significant in the context of designing antifouling coatings and systems as well as explaining variations in bacterial contamination and biofilm formation processes on functional surfaces.

Introduction

For abiotic surfaces, bacterial adhesion (attachment) is a major problem leading to pathogenic contamination and/or performance losses of various devices, equipment, components, accessories, and vehicles used in healthcare, food and food packing, pipelines, and the maritime transportation industries.1−3 For biotic surfaces, bacterial adhesion is the first step in bacterial infections, vegetable and fruit spoilage, and plant diseases.4−8 At a colloidal level, bacterial adhesion to a surface corresponds to a transition from the planktonic state to the sessile state, involving several phases: (i) diffusive, convective, or flagellar motion of bacteria from bulk fluid until bacteria start to sense nanoscale intermolecular forces between bacteria and the surface, (ii) translocation of bacteria toward the surface due to the gradient of intermolecular interactions between bacteria and the surface along with the thermal energy, kBT, and flagellar kinetic energy (if present), (iii) approach of the bacterial cell wall or its appendages to the surface until the disjoining pressure of displacing the surface hydration layer is overcome, and (iv) molecular contact and anchoring between the substrate and bacterial wall/appendages.9−15

Prior studies have reported that there are several key properties and parameters of bacteria influencing bacterial adhesion to a surface, each to varying degrees. These include the hydrophobicity of the bacterial wall,16 surface potential of the bacteria,17 bacterial size,18−20 bacterial shape,20−22 the presence of curli and pili,23−26 quorum sensing ability,27,28 and the ability to produce extracellular bacterial adhesins.29 In addition, the characteristics of the substrate surface such as hydrophobicity,30−32 surface potential and charge,33 heterogeneity,34,35 patterns,2,36,37 roughness,38−41 and stiffness42 have been demonstrated to also be important. Some of the key external conditions governing bacterial adhesion trends are suspension pH,43,44 ionic strength,45,46 temperature,47,48 and the characteristics of any convective flow fields present.49−52

While there exist a large body of literature focusing on the influence of surface roughness on bacterial adhesion, the findings are conflicting. For instance, Yoda et al.53 investigated the effect of roughness on adhesion of Staphylococcus epidermidis to oxidized zirconium–niobium alloy (arithmetic mean surface roughness, or Ra, of 8.5 and 30.0 nm), cobalt–chromium–molybdenum alloy (Ra of 5.8 and 12.0 nm), titanium alloy (Ra of 7.1 and 16.5 nm), pure titanium (Ra of 5.6 and 22.0 nm), and stainless-steel surfaces (Ra of 1.8 and 7.2 nm). They found that there was increased bacterial adhesion on coarse surfaces compared to fine surfaces. Bohinc et al.54 prepared glass surfaces with five different roughnesses (0.07 μm, 0.58 μm, 0.99 μm, 2.5 μm, and 5.8 μm) and observed that the rate of Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and Pseudomonas aeruginosa (P. aeruginosa) adhesion increased with increasing surface roughness. However, Scheuerman et al.55 relied on silicon surfaces with 10, 20, 30, and 40 μm wide grooves of 10 μm depth (i.e., differing spacing parameters) to study the bacterial attachment behavior of P. aeruginosa and Pseudomonas fluorescens. They found that the rate of bacterial attachment was independent of groove size for all bacteria. Hilbert et al.56 reported that the adhesion of Pseudomonas sp., Listeria monocytogenes, and Candida lipolytica to stainless steel surfaces was not influenced by surface roughness in the Ra range of 0.01 to 0.9 μm. On the other hand, Truong et al.57 compared the adhesion of P. aeruginosa and S. aureus on titanium surfaces with root-mean-square (RMS) roughness of 223.3 and 84.2 nm. They observed that S. aureus and P. aeruginosa demonstrated preferential attachment to the smoother titanium surfaces that were prepared by equal channel angular pressing. Wu et al.39 reported that the number of adherent P. aeruginosa and S. aureus was significantly lower on rough stainless-steel surfaces as compared to the electropolished, smooth stainless-steel surfaces. Encinas et al.58 have recently reported that bacteria adhesion can be suppressed by submicrometer-scale surface roughness. Similarly, Jang et al.59 have incorporated nanotexture on stainless steel surfaces via electrochemical etching to inhibit bacterial adhesion.

To assess such paradoxical seeming trends of bacterial adhesion with respect to surface roughness observed in the literature, we have relied on hydrophobized quartz surfaces with uniformly controlled surface chemistry and coverage but systematically varying surface roughness. Fourteen different surface roughness values to cover roughness at multiple length scales were utilized for this investigation. The methyl terminated substrates were particularly selected due to their inert nature and since specific ligand–receptor interactions between such substrates and bacteria do not emerge. Hence, these surfaces allow us to clearly elucidate the influence of surface roughness on bacterial adhesion to abiotic surfaces that is mostly controlled by nonspecific interactions. As bacterial microorganisms, Gram-negative Salmonella typhimurium LT2 (Salmonella) and Escherichia coli O157:H7 (E. coli) as well as Gram-positive Listeria innocua (Listeria) have been utilized. With these selections, it is ensured that all bacteria have a similar shape (i.e., bacillus shape) and the effect of shape is not additionally superimposed to the influence of surface roughness. In addition, Salmonella, E. coli, and Listeria are three key microbial pathogens that are commonly associated with foodborne illnesses.60,61 While the characterization of surface chemistry and coverage was carried out using a scanning X-ray photoelectron spectroscopy microprobe (XPS), surface roughness was determined using atomic force microscopy (AFM). Bacterial adhesion was quantified using direct visualization via scanning electron microscopy (SEM).

Experimental Methods

Materials

Quartz (SiO2) was purchased from Ted Pella, Inc. (Redding, CA, USA). Tetrafluoromethane (CF4) and oxygen (O2) gas was obtained from Brazos Valley Welding Supply, Inc. and used directly as purchased (Bryan, College Station, TX, USA). Potassium hydroxide (98%, reagent grade) was purchased from Ward’s Science (Rochester, NY, USA). Trimethylsilyl chloride (TMCS, ≥ 95.0%) was obtained from Sigma-Aldrich Co. (St. Louis, MO, USA) and used with the hexane (≥95.0%) purchased from Avantor Performance Materials, Inc. (CenterValley, PA, USA). The 200-proof pure ethanol (HPLC grade) utilized was ordered from Koptec (King of Prussia, PA, USA). For bacterial experiments, tryptic soy agar (TSA), tryptic soy broth (TSB), and TSB containing 0.6% yeast extract (TSB-YE) were procured from Becton, Dickinson and Co. (Sparks, MD, USA).

Preparation of Quartz Surfaces with Different Surface Roughness

Quartz slides were first rinsed with ultrapure water (resistivity ≥18.2 MΩ·cm) collected from a water purification system (Milli-Q Advantage A10; EMD Millipore Corp., Billerica, MA, USA) and then dried at room temperature. The dried slides were subjected to oxygen plasma treatment conducted in order to remove organic adsorbates using the CS-1701 reactive-ion etcher (RIE; Nordson MARCH, Concord, CA, USA). Following plasma treatment, the quartz slides were rinsed with Milli-Q water again and dried. Plasma treatment serves a dual-purpose: it not only increases the reactivity of surface groups but also inactivates any pre-existing bacteria on the surfaces.62 To produce surfaces with varying nanoroughness, the prepared quartz slides were treated in the CS-1701 reactive-ion etcher under CF4/O2 gas with varying etching times up to 2 h.

Hydrophobization of Quartz Surfaces

To increase the hydrophobicity of the surfaces, the roughened quartz slides were modified using TMCS, which was prepared by diluting TMCS (6 wt %) in hexane. The quartz slides were then dipped into the TMCS and hexane solution for 24 h to allow the silanation modification of the surfaces to occur. Next, the samples were removed from the TMCS solution and rinsed three times with ethanol to remove excess TMCS and byproducts. At last, the samples were dried with compressed nitrogen gas before characterization.

Characterization of Surface Roughness

The morphology and roughness of quartz surfaces with different roughnesses were studied using atomic force microscopy (AFM, Bruker Dimension Icon, Billerica, MA, USA) in tapping mode. Several parameters were quantified to analyze the surface roughness, such as the root-mean-square (RMS) roughness, autocorrelation length, and roughness ratio. The RMS roughness was calculated based on the root-mean-square of the height of microscale peaks and valleys as a means of quantifying the average feature size. The roughness ratio was calculated by dividing the actual surface area to the projected area (φ ≥ 1). Autocorrelation length was obtained from the analysis of power spectral density function (PSDT). The Gwyddion software 2.49 (Czech Metrology Institute, Jihlava, Czech Republic) was used to analyze the AFM images and calculate the above-mentioned parameter values for each sample.

Characterization of Surface Chemistry

The chemical interactions between the modified quartz and TMCS were studied via attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) using the IRPrestige-21 (Shimadzu Corp., Kyoto, Japan) system. The results of ATR-FTIR were analyzed with the IRsolution version 1.40 (Shimadzu Corp., Kyoto, Japan) software. TMCS coverage on the modified surfaces was characterized utilizing a PHI VersaProbe II scanning XPS microprobe (Physical Electronics, Chanhassen, MN, USA) The ATR-FTIR and XPS results are shown in the Supporting Information to indicate the successful modification of the surfaces as well as the similar chemical properties and coverage of the surfaces (Figure S1 and Figure S2)

Preparation of Bacterial Cultures

Working cultures of Gram-negative bacterium Salmonella enterica subsp. enterica serovar Typhimurium str. LT2 (Salmonella, ATCC 700720) and Escherichia coli O157:H7 (E. coli) as well as Gram-positive Listeria innocua NADC 2841 were prepared following our previously described method.63−65 Briefly, bacteria were separately transferred by microloops (10 μL) from TSA slants to 9.0 mL TSB solutions. After aerobically incubating at 37 °C for 24 h, a second transfer of each bacterial strain was carried out by transferring one 10 μL loop of material from each of the first solutions to 9.0 mL of fresh TSB followed by incubation under the same conditions. Afterward, the working culture of each bacterium was purified by centrifuging at 1500 × g for 15 min and resuspending in 0.1 wt % aqueous peptone solution. This was performed three times for each working culture. The final concentration of each working culture was determined through plate counting to be 8.6 ± 0.3 log10 CFU/mL, 8.8 ± 0.2 log10 CFU/mL, and 9.1 ± 0.2 log10 CFU/mL for E. coli, Salmonella, and Listeria, respectively. Right before performing bacterial inoculation assays, the bacterial cells were suspended in sterilized deionized (DI) water.

While the media suspending bacteria is often chosen to be PBS buffer in medical microbiology, many engineering applications and situations in different fields do not involve such a buffer (e.g., environmental surfaces in hospitals, engineering surfaces in fresh water, washing of vegetables and fruits with water, irrigation of crops, freshwater flow in pipelines). In this study, we focus on the cases where bacteria are not suspended in a buffer. Electrical conductivity measurements on these suspensions revealed that the electrical conductivity of E. coli, Salmonella, and Listeria suspensions was 5.6 ± 2.7, 7.9 ± 0.3, and 6.1 ± 0.3 μS/cm, respectively. These conductivity values correspond to the equivalent salt (NaCl) concentration of 39.1 ± 5.5, 57.4 ± 0.7, and 43.2 ± 0.6 μM, respectively, which are likely byproducts of lysed cells and bacterial metabolites. The long-term preservation and survivability of the E. coli, Salmonella, and Listeria were confirmed, and it was found that a less than 0.5 log unit reduction of the bacteria population occurs after storing such bacteria in water over 1 week.66 The frequent bacterial contamination scenarios with freshwater in many engineering applications and survival of bacteria under these conditions (non-PBS conditions) are the rationale behind the selection of bacterial inoculation conditions in this study.

Characterization of Bacteria

The zeta potential of bacteria was evaluated using electrophoretic light scattering (Zetasizer Nano, Malvern Panalytical, Malvern, United Kingdom). In these measurements, the bacterial concentrations of 0.1–1 vol % suspended in deionized (DI) water were used. The interfacial tension of bacteria was determined by preparing dehydrated bacterial lawn on silicon wafers. First, the bacterial suspension prepared as described above was washed with DI water and centrifuged. Afterward, the supernatant was poured off and the lower layer of bacteria cells were transferred to the <100> silicon wafers by using a sterile spatula and carefully spread out by an L-shape spreader to generate a uniform distribution. The samples were left to dry at room temperature for 12 h to gain a dehydrated, homogeneous bacterial surface with a stable contact angle.67 SEM images was taken to confirm the surface bacterial coverage (Figure S3). The static contact angles of bacteria were evaluated using milli-Q water and diiodomethane (DIM) via a sessile drop technique where the droplet volume was about 5 μL. The contact angle results were analyzed by ImageJ software (National Institutes of Health, Bethesda, MD, USA) via Low-Bond Axisymmetric Drop Shape Analysis (LBADSA).64 The surface tension of each bacterium was calculated based on the harmonic mean and geometric mean equations, using the contact angles of water and DIM.

The cell size of each bacterial strain used in this work was studied by AFM (Dimension Icon AFM, Bruker, Billerica, Massachusetts) and SEM (JEOL JSM-7500F, JEOL Ltd., Tokyo Japan). To ensure the reliability of the data, three AFM and SEM images with multiple bacteria each were analyzed to determine the cell length and width. AFM micrographs were analyzed with by Gwyddion software 2.49 while SEM images were analyzed with ImageJ software 1.8.0_172 (ImageJ, U.S. National Institutes of Health, Bethesda, Maryland, USA). Representative AFM images for single bacterium are shown in Figure S4 and the interfacial and morphological characteristics of bacteria are summarized in Table 1.

Table 1. Summary of Structure and Interfacial Characterization of the Bacteria Used.

  Salmonella E. coli Listeria
Type Gram-negative Gram-negative Gram-positive
Dimensions (μm) Length: 2.14 ± 0.27 Length: 1.94 ± 0.15 Length: 1.37 ± 0.20
Width: 0.92 ± 0.11 Width: 1.00 ± 0.11 Width: 0.59 ± 0.07
Contact angle of water (deg) 21.9 ± 3.0 29.8 ± 2.6 19.4 ± 0.2
Contact angle of DIM (deg) 47.6 ± 1.4 38.1 ± 0.3 42.2 ± 1.2
Surface tension (mN/m) 70.9 ± 1.4 70.0 ± 1.1 73.0 ± 0.30
Zeta potential (mV) –21.6 ± 5.4 –9.8 ± 3.7 –25.1 ± 9.6

Inoculation Assay

Bacterial suspensions, prepared as described above, were used directly to inoculate the methylated quartz samples of varying roughnesses. The samples were each submerged in a 9.0 mL bacterial suspension and shaken by a mini shaker (VWR International, LLC, Radnor, PA, USA) at 150 rpm for 4 h. After 4 h of shaking, each sample was removed from the suspension and held vertically for 5 min to remove any remaining liquid droplets to reduce drying effects on the surfaces. Afterward, the surfaces with attached bacteria were gently blown with sterile nitrogen gas to further remove any liquid. As a whole, this assay involves an initial bacterial deposition step of 4 h followed by a weak detachment step associated with the passage of air–liquid interface over the weakly (reversibly) attached bacteria. A summary table of the experimental matrix can be found in the Supporting Information (Table. S1).

Enumeration of Bacterial Adhesion

The direct counting method was performed to quantify the number of attached bacterial cells on each sample using SEM imaging. Before SEM imaging, the bacterial cells were inactivated by exposing them to small amounts of acrolein vapor. Following inactivation, the sample surfaces were coated with a thin film of palladium and platinum (Pd/Pt) alloy to increase surface electrical conductivity during SEM imaging. Here, the presence of thin metal coating serves a side function of immobilizing and fixating adherent bacteria on the substrate. To increase statistical reliability of the quantification of the attached bacteria, at least ten different areas of each sample were randomly selected to be imaged and quantified directly through SEM. The SEM studies were performed at a pressure of 7.2 × 10–7 Torr, working distance of 15 mm, and operation voltage of 5 kV. The bacterial numbers were counted manually (to distinguish overlapping and aggregated cell cases) and ImageJ via Cell Counter Plugin.

Statistical Analysis

In order to determine the statistically differing counts of bacterial attachment between the samples with different roughness, the bacterial density for each microorganism was statistically analyzed via one-way analysis of variance (ANOVA) with Tukey’s posthoc test. The p-value for statistical difference between means was set as p = 0.05. All statistical analyses were conducted by using JMP software (SAS Institute, Inc., Cary, NC, USA).

Calculation of DLVO Interactions between Bacterium and Rough Surface Using Surface Element Integration (SEI) Method

The interactions between a rough bacterium and a surface were calculated using the surface element integration (SEI) method. The method was developed by Bhattacharjee and Elimelech68 for calculating the DLVO interactions for complex geometries where obtaining a solution for the nonlinear Poisson–Boltzmann equation is complicated and computationally expensive. In this work, we have implemented the SEI method to gain insights into the bacterial interactions on rough surfaces. The roughness was modeled by the double-cosine function [cos(x) cos(y), which is a periodic, 2-D wave] as shown in Figure 1. In this analysis, since the size of the bacteria is much larger than the wavelength of double-cosine function (i.e., characteristics roughness scale), the interaction calculation is insensitive to the exact positioning of bacteria relative to bacteria (i.e., the center of bacteria directly projected above a peak, maximum, versus projected above a valley, minimum).

Figure 1.

Figure 1

Schematic illustrations of the model for the simulation of bacteria and rough surfaces interactions. (A) Schematic illustration of the model surface geometry used in calculating interaction between a bacterial cell and a rough surface via the SEI method. (B) The cylinder-fixed coordinates and the surface-fixed coordinates have different origins but the same axis directions. The distance, h, means the closest distance between the cell surface and quartz surface, calculated by adding the distance from cell surface to the x′-axis and the distance from x′-axis to the rough surface. (C) The separation, D, indicates the distance between the center of cylinder and the peak of the double-cosine function.

Results and discussion

Characterization of Surface Roughness

Figure 2 shows AFM micrographs of 14 different methylated quartz samples prepared by varying the etching time with CF4/O2 gas (Samples A-N). At short plasma etching times (<5 min), the features of the polished quartz samples, having an RMS roughness of 1.7 nm, gradually eroded. Isolated, nanoscale hemispherical features started to emerge on the surfaces (Figure 2C-E). As the etching times were increased (10 to 25 min), the areal density of nanohemispheres increased (Figure 2 F-G). At larger etching times (30 to 120 min), the nanohemispheres transformed into ovoid textures (Figure 2 I-L) and then cratered, volcano-like textures (Figure 2 M-N). Through these morphological transitions, an RMS roughness range of ∼2 nm to ∼390 nm was covered.

Figure 2.

Figure 2

AFM micrographs of methylated quartz surfaces of systematically varying roughnesses (A-N). The samples were labeled alphabetically in accordance with increasing etching times (and increasing root-mean-square, RMS, roughness) used in their preparation as described in Table 2. For these samples, the RMS roughness progressively ranges from 1.7 to 385 nm. For each condition, three to seven samples were prepared using identical etching processes. All AFM micrographs have the same scan area of 5 μm × 5 μm. On the left side of each micrograph, the corresponding scale bar for the height is shown.

Surface roughness can be described in terms of various parameters. In the context of analyzing/correlating bacterial adhesion trends with roughness, amplitude parameters (e.g., root-mean-square, RMS roughness), lateral parameters (autocorrelation length), and areal roughness parameters (e.g., roughness ratio) were selected by considering the interplay among characteristic lengths of bacteria (diameter and length) and characteristic lengths of surface roughness. First, RMS roughness indicates the effective height of roughness asperities of a surface. The comparison of bacterial diameter and RMS roughness indicates what fraction of adhering bacteria could be embedded into surface texture. Second, the spacing between asperities is the key length scale controlling whether a bacterium can dock-in between surface asperities. If the interasperity spacing is too small, bacteria must reside on top of the asperities, which implies reduced van der Waals interactions and an unfavorable bending energy for bacteria to accommodate into these spaces. Autocorrelation length is a measure of periodicity and directly related to the interasperity spacing. Third, the roughness ratio indicates the increase in the effective area of a surface compared to the projection area. This means a high roughness ratio can indicate a higher number of sites for bacteria to adhere assuming bacteria can conform to the roughness. Table 2 lists the key surface roughness characteristics and static contact angles of water on these methylated quartz surfaces. The prepared samples covered RMS roughness values from ∼2 nm to ∼390 nm while the roughness ratio ranged from 1.0 to 3.7 for these surfaces. The smallest and largest value of autocorrelation length was ∼27 nm to ∼118 nm, respectively. RMS roughness and roughness ratio exhibited a correlation with etching time (i.e., increased etching time results in increased RMS roughness and roughness ratio), whereas the autocorrelation function has up and down trends with respect to the etching time.

Table 2. Surface Characteristics and Wetting Properties of the Prepared Methylated Quartz Surfaces.

sample etching time (s) RMS roughness (nm) roughness ratio autocorrelation length (nm) contact angle of water (deg)
A 0 1.7 ± 0.1 1.00 ± 0.00 51.5 ± 9.3 95.5 ± 1.2
B 15 3.0 ± 1.6 1.00 ± 0.00 56.9 ± 11.7 97.3 ± 1.6
C 30 5.8 ± 1.2 1.01 ± 0.01 35.5 ± 7.1 98.2 ± 1.2
D 60 9.1 ± 1.7 1.03 ± 0.02 47.5 ± 10.6 106.5 ± 1.2
E 300 11.3 ± 2.3 1.07 ± 0.03 27.1 ± 11.3 117.7 ± 1.7
F 600 16.8 ± 1.1 1.13 ± 0.08 34.0 ± 3.6 128.6 ± 1.4
G 900 26.9 ± 3.5 1.16 ± 0.03 52.3 ± 3.8 143.3 ± 1.9
H 1200 44.9 ± 5.1 1.19 ± 0.01 64.6 ± 5.5 151.1 ± 1.4
I 1500 54.8 ± 9.2 1.36 ± 0.03 75.7 ± 10.2 151.1 ± 0.7
J 1800 63.7 ± 5.7 1.37 ± 0.04 115.7 ± 6.6 152.8 ± 1.3
K 3600 85.7 ± 8.7 1.37 ± 0.02 106.6 ± 9.2 151.4 ± 1.1
L 4800 128.7 ± 18.0 1.81 ± 0.18 81.0 ± 4.2 149.1 ± 1.1
M 6000 215.0 ± 16.1 2.83 ± 0.57 118.7 ± 8.7 149.4 ± 1.3
N 7200 385.3 ± 110.4 3.69 ± 0.51 128.0 ± 10.4 150.8 ± 0.9

The contact angle of water demonstrated a large variation with respect to the surface morphology. While the static contact angle was 95–97° for smooth surfaces, the wetting behavior transitioned into a superhydrophobic behavior (i.e., contact angle of water >150°) for surfaces with RMS roughness greater than ∼55 nm.

Influence of Surface Roughness on Adhesion of Salmonella

After extensively characterizing and confirming the uniformity of the surface chemistry and coverage on the prepared surfaces of varying roughness, the samples were fully immersed in bacterial (Salmonella) suspension for 4 h to gain insights into bacterial adhesion trends at the early stage of biofilm formation. It was found that the surface roughness strongly influenced the extent of bacterial adhesion on the surfaces (Figure 3). At low roughness values (i.e., RMS < ∼10 nm), the surfaces contained isolated microcolonies with a relatively low number of adherent bacteria and a low overall areal density (Figure 3 A-D). In addition, the presence of extracellular polymeric substances (EPS) around microcolonies was also noted. At intermediate roughness values (i.e., RMS between 10 and 40 nm), the number of adherent bacteria on the samples increased significantly and the isolated microcolonies were replaced by loosely connected bacterial monolayers (Figure 3 E-G). In addition, bacteria appeared to be more deformed/flattened on these surfaces, indicating a stronger attraction between bacteria and such surfaces. At high roughness values (i.e., RMS roughness >45 nm), the areal density of adhering bacteria was extremely low and no microcolonies were observed. Bacteria mostly resided as single, isolated organisms on these surfaces while a small fraction was in the form of dimeric and trimeric aggregates (Figure 3 H-N).

Figure 3.

Figure 3

SEM micrographs displaying bacterial adhesion trends on hydrophobically modified quartz surfaces roughness for Salmonella. (A-N) The surface roughness RMS varies systematically. The frame at the right lower corner in each figure shows the cross-section profile of the surface, reflecting different surface roughness. The height of frame is denoted as scale bar (100, 500, and 1000 nm, respectively). Bacterial adhesion is significantly lower for superhydrophobic surfaces (samples H-L) compared to other samples (p < 0.05). Each micrograph has the same size of 45.6 μm × 60.7 μm (see Figure S5 in Supporting Information for larger images).

Adhesion Response of Different Bacterial Species to Surface Roughness

Aside from Salmonella, we have also utilized Listeria (Gram-positive) and E. coli (Gram-negative) to determine if the dependence between surface roughness and bacterial adhesion is similar for different types of bacteria. Figure 4 demonstrates Listeria and E. coli adhesion trends on methylated quartz substrates of varying surface roughness. Three typical samples (corresponded to D, G, N in Figure 2 and Table. 2) were chosen to study the different adhesion behavior on three types of surfaces, relatively smooth surface (hydrophobic), moderately rough surface (hydrophobic), and rough surface (superhydrophobic). Similar to the case of Salmonella, at low surface roughness, the bacterial densities, Γ, were low, 2–3 × 10–2 cells/μm2. At intermediate roughness values, the number of adhering bacteria increased to 5–10 × 10–2 cells/μm2. On the other hand, when surface roughness reached high values (when the surfaces became superhydrophobic), the bacterial adhesion was significantly hindered and had a range of 2–9 × 10–3 cells/μm2. Based on these results, the statistical analysis with Tukey-Kramer honest significance test revealed that the bacterial adhesion is not significantly different for these three types of bacteria at a given surface roughness (p > 0.05, see Supporting Information Table S2 for further analysis). While the number density of adhering bacteria is similar, the colonization behavior showed some differences with respect to microorganism type. For instance, at intermediate roughnesses, Listeria tended to form tightly packed colonies whereas E. coli aggregated into dimers, trimers, and tetramers with a characteristic separation distance of 3–5 μm (Figure 4). In addition, the nonwetting behavior of the EPS layer and relatively large volume of EPS bridges between E. coli was evident.

Figure 4.

Figure 4

SEM micrographs displaying bacterial adhesion trends on hydrophobically modified quartz surface roughnesses for Listeria and E. coli. The surface roughness RMS varies systematically. Bacterial adhesion is significantly lower for superhydrophobic surfaces, where the bacterial cells are marked with red ovals, compared to other samples (p < 0.05). The scale bar is the same for all micrographs and is equal to 10 μm. (See Figure S6 in Supporting Information for larger images.)

There can be multiple reasons responsible for the differences in microcolony formation behavior. While Listeria is a Gram-positive bacterium, E. coli is a Gram-negative bacterium. For Gram-negative bacteria, there exists three principal layers in the cell wall: the outer membrane, the peptidoglycan cell wall, and the cytoplasmic or inner membrane. The Gram-positive wall differs from the Gram-negative wall in several ways: (i) The outer membrane is absent in Gram-positive bacteria. (ii) Gram-positive bacteria are covered with a peptidoglycan layer much thicker than the peptidoglycan layer of Gram-negative bacteria. (iii) Gram-positive bacteria tend to contain teichoic acids, which can be wall teichoic acids coupled to peptidoglycan and lipoteichoic acids anchored to the cell membrane. Their acidic nature results in a negative surface charge in aqueous media, which can modulate the electrostatic double-layer forces differently. In addition, the difference in quorum sensing behavior of Gram-positive and Gram-negative bacteria, Gram-negative bacteria rely on n-acyl homoserine lacton molecules (autoinducer-1, AI-1) while Gram-positive bacteria use mainly peptides (autoinducer peptides), can lead to differences in chemotaxis, which is related to the microcolony formation as well. Furthermore, the surface topography also has an effect on the bacterial adhesion behavior in terms of morphological, genomic, and proteomic response, while the response of different types of bacteria may vary.69 It was observed that the type-1 fimbriae disappeared in E. coli adherent onto nanostructured substrates, which were believed to affect its colonization behavior, the regulation of proteins involved in the adhesion process, and defense mechanisms.70 The Pseudomonas aeruginosa cells, on the other hand, were found to lose their flagella upon adhering to a nanostructured surface.69 From a purely hydrodynamics perspective, the aspect ratio of E. coli was ∼1.9 while that of Listeria was ∼2.3. Since nonspherical colloids can rotate as it translates; the anisotropic translational diffusive motion of rod-shared bacteria can differ significantly from that of a sphere (cocci) and a larger aspect ratio also translates into a further deviation from a spherical shape. The hydrodynamic theory by Doi and Edwards71,72 predicts that for rods (irrespective of the aspect ratio) under the no-slip (stick) boundary condition, the translational diffusion coefficient in the parallel (D∥) direction (parallel to its major axis) is twice of that in the perpendicular direction (D⊥). On the other hand, under a slip boundary condition, there exists a decoupling between the parallel and perpendicular motion, and the ratio of the diffusion coefficients in the parallel and perpendicular direction approaches the aspect ratio.73,74 The surface characteristics of different microorganisms (peptidoglycan exterior versus lipidic exterior) may lead to a different slip or partial slip behavior in aqueous media in accordance with the degree of favorable interactions with water molecules. Such secondary effects can also alter the bacterial adhesion behavior when the overall process is diffusion-controlled as opposed to “reaction-controlled”. The different colonization behavior observed can be attributed to the combination of the above-mentioned factors.

Bacterial Reaction/Deposition Kinetics Analysis: Hydrophobic Regime

To explain the observed bacterial adhesion trends, we consider a reaction/deposition kinetics scheme where the adhesion of bacteria onto the substrate is modeled as an irreversible, first-order reaction/deposition (process):75,76

graphic file with name la3c00091_m001.jpg 1

where B denotes planktonic bacteria, S denotes effective surface area permitted for bacterial adhesion, and B·S indicates adherent bacteria. The corresponding expression for the reaction (physisorption) rate, r, and the change in the concentration of entities relevant to the system is

graphic file with name la3c00091_m002.jpg 2
graphic file with name la3c00091_m003.jpg 3

where [B·S] is the surface concentration of adherent bacteria, Γ (#/m2), [B] is the bacterial concentration in suspension (#/m3), [S] is the effective available surface area (m2) and ka is the reaction constant that varies with the surface topography (1/m·s). Since only a small fraction of bacterial suspension accumulates as adsorbates on the surface, the bacterial concentration in the suspension can be assumed constant. Because the effective available surface area decreases as bacterial adhesion takes place, it can be calculated from [S] = [S]T(1 – θ × [B·S]) where [S]T is the total initial surface area and θ is a projected contact area per bacterium. Then, the integration of eq 3 results in the following expression for [B·S]:

graphic file with name la3c00091_m004.jpg 4

where φ = [B][S]Tθka.

Given that all bacterial inoculation experiments were carried out at an inoculation time of 4 h and the same bacterial concentration, [B], differing number of bacteria on different surface roughness can be explained either by the modification of effective surface area [S]T or the change of bacterial adhesion rate constant, ka, or the combination of both factors. We have divided our discussion related to these concepts into two parts: hydrophobic regime and superhydrophobic regime. For the hydrophobic regime, our analysis first focuses on the effect of increased surface area due to roughness on bacterial adhesion. Given that bacteria surface is deformable, the existence of surface roughness implies a conformal contact between bacteria and the surface. However, since the elastic energy needed to stretch the bacteria wall from its equilibrium position is unfavorable compared to just bending and buckling the bacterial surface, the change in the total surface area of bacteria wall is expected to be small.77−79 Hence, the increase in the substrate area can increase the nominal number of bacteria per unit projected area.

To understand the influence of increased effective surface area, we plotted bacterial adhesion with respect to roughness ratio (Figure 5). We found that there was a linear relationship between roughness ratio and bacterial adhesion, with the coefficient of determination, r2, of 0.98. On the other hand, our attempts to correlate bacterial adhesion with RMS (Rq) roughness led to a poorer fit with r2 < 0.90. For the case of autocorrelation length, there was no clear trend between bacterial adhesion and autocorrelation length. Here, we must note that for all roughnesses studied in this work, bacterial size was greater than the height and spacing length scales of the surface features. The trends may change once bacteria are smaller than interasperity distance. Overall, considering that the roughness ratio is the ratio of actual surface area and projected surface area, such a linear correlation suggests that bacterial adhesion is directly controlled by surface area.

Figure 5.

Figure 5

Correlations between bacterial adhesion density (Salmonella) and various variables. (A) Roughness ratio. (B) RMS roughness. (C) Autocorrelation length. Insets focus on the correlations for the hydrophobic regime (by omitting superhydrophobic regime).

Regarding the rate of bacterial adhesion, for a colloidal system (e.g., bacteria), Kramers’ rate theory80,81 can be used to estimate the adsorption/adhesion rate constant in terms of diffusivity, D:82

graphic file with name la3c00091_m005.jpg 5

where D(x*) is the diffusivity at the distance leading to the maximum in the potential energy profile, k is the Boltzmann constant, T is temperature, and Ea is the activation barrier for adhesion. For bacterial systems, the activation energy, Ea, is governed by the interplay among electrostatic double-layer forces and van der Waals interactions as described by the DLVO interactions or extended DLVO.83−87 For the cases where the diffusivity is mostly constant (i.e., the wall and interfacial effects on diffusivity is negligible), Kramers’ rate theory can also be expressed in a slightly different form:88

graphic file with name la3c00091_m006.jpg 6

where α is the width of the potential at a distance kT below the maximum, and L is the distance that a bacterium in the bulk state needs to travel to reach the barrier maximum. As a first approximation, L can be equated to the interbacterial spacing set by the planktonic concentration of bacteria in the suspension. A simpler argument can also be made with an Arrhenius-type expression as well, while the validity of Kramers’ model is known to be better for colloidal systems.

Previous streaming potential and surface science studies reported that a methylated quartz surface bears a negative zeta potential due to the specific organization and orientation of hydroxyl ions onto hydrophobic interfaces and the dissociation of uncovered silanol and siloxane groups of quartz in aqueous media.76,89 For such surfaces, the energetics of bacterial adhesion is mainly governed by the DLVO interactions where the interplay among van der Waals attraction (VDW) and electrical double layer repulsion (DL) controls the range and magnitude of interactions. The balance between these interactions also controls the height of the activation barrier for the process of bacterial approach toward a surface.90 Using the surface energy integration (SEI) method (see Supporting Information for detailed explanation), we have obtained the energy-distance profiles for the bacterium-surface system at varying roughness values comparable with the experimentally observed roughness values (Figure 6). It was found that increasing surface roughness decreases the repulsion and the activation barrier for adhesion, Ea, in a linear fashion (r2 = 0.995, Figure S7). In other words, as the surface roughness increases, the activation energy for bacterial energy decreases, indicating more favorable conditions for bacteria to attach to the surfaces. Clearly, this analysis is somehow simplified given that bacteria can freely rotate in aqueous media. Rod-shaped bacterium can change its orientation as it approaches a surface. Furthermore, Salmonella has surface appendages which can facilitate their docking to surface and overcome the activation energy barrier. Hence, only general trends of how the activation energy depend on surface roughness rather than the magnitude of interaction energy should be considered in this analysis.

Figure 6.

Figure 6

DLVO interaction energy profile between a salmonella cell and methylated quartz surfaces with different roughness. The parameters used to obtain the plot was as follows: Hamaker constant, Abws = 3.29 × 10–20 J; bacterial length = 2.14 μm, bacterial diameter = 0.92 μm; zeta potential of bacteria (Salmonella) = −21.6 mV; zeta potential of surface (methylated quartz) = −20.0 mV; Debye length = 40.5 nm; and temperature = 298.15 K.

Overall, based on the above-mentioned analysis, both increased surface area with increasing roughness and decreased activation energy with increased surface roughness can enhance the extent of bacterial adhesion. It is difficult to deconvolute their relative importance with the existing experimental data. However, it can be deduced that since the rate constant has an exponential dependence to the activation energy and the activation energy is linearly decreasing with roughness, the rate constant, ka, is expected to more strongly control the extent of bacterial adhesion compared to increased surface area of adhesion, [S]T in light of eq 4. This concept can be supported by the data published by Yoshimoto et al.91 They showed that for glass surfaces having the same optical grade roughness, increasing ionic strength from 5 mM to 20 mM and from 20 mM to 50 mM, caused the relative bacterial (Acinetobacter sp. Tol 5) adhesion on glass to change from ∼0.5 to ∼0.7 and to ∼1.2.

Bacterial Reaction/Deposition Kinetics Analysis: Superhydrophobic Regime

For surfaces with contact angles above 150° (i.e., superhydrophobic surfaces), the areal density of adhering bacteria was much less. Here, the presence of interstitial air (air gaps) as described by Cassie–Baxter model must be considered while assessing the bacterial adhesion trends on surfaces of varying roughness. Namely, in this regime, air gaps can cause some changes in the way a bacterium can adhere on a rough surface, thus both surface roughness and wetting influence the bacterial adhesion. First, aqueous media suspending planktonic bacteria will only be in contact with the upper sections of asperities for superhydrophobic surfaces. Second, the replacement of water with air in the valley between asperities will modify the van der Waals interactions between a bacterium and the surface. Third, the presence of air gaps also implies the existence of Laplace pressure force acting toward bacteria. We now consider these effects in detail.

Since the horizontal and vertical roughness length scale is still smaller than bacterial size, the attachment of a bacterium on a superhydrophobic surface implies that the bacterium resides on top of the surface asperities similar to the hydrophobic case. However, a careful inspection of SEM micrographs in Figure 3 (A-F versus H-L) indicates that the effective projected area of bacteria on superhydrophobic surfaces is smaller than that on hydrophobic surfaces, and the thickness of bacteria was larger on superhydrophobic surfaces, indicating poorer spreading/wetting of bacteria on the surface. This trend could be ascribed to the larger roughness values of superhydrophobic surfaces and the resultant weakening of attractive van Waals forces due to the larger effective distance between a bacterium and a surface. It is important to underline that while the Hamaker constant of bacteria-water-surface is smaller than that of bacteria-air-surface, the changes in distance effects are more dominant on the van der Waals forces for this system studied in this work (roughness increases from ∼(2–40 nm) to ∼(50–390 nm) while the Hamaker constant increases from 3.29 × 10–20 J to 7.64 × 10–20 J upon changing medium from water to air based on the Lifshitz theory). Flattening and spreading of bacteria on a surface is governed by the interplay between the adhesive force and the elastic deformation force. Previous studies reported that Young’s modulus of a bacterial wall is in the order of 0.01 to 0.1 GPa for many bacteria.92 While the typical force needed to detach a bacterium from a surface depends on the nature of the surface and the bacterium, it usually ranges from 1 nN to 1 μN.93 Hence, assuming equidistribution of the adhesion force over the asperities underneath a bacterium and the validity of the Hertz contact theory with a cylinder on a flat geometry, one can roughly estimate that bacterial deformation is on the order of ∼0.5 nm to ∼50 nm with the upper and lower limits of moduli and forces reported above. SEM micrographs in Figure 3 seem to be more consistent with larger deformation values.

An order of magnitude analysis of the Laplace pressure yields an upper and lower limit of 2.6 and 0.4 MPa, respectively, assuming that rms roughness is equal to the radius of curvature with spherical enclosures. The multiplication of this pressure with the projected bacterial area of contact (2 μm × 1 μm) results in a pressure force of 0.7 to 5 μN, which is larger than the forces required to detach a single bacterium from a surface.93

Conclusions

Overall, in this study, we investigate the effect of substrate surface roughness on the adhesion behavior of bacteria to model hydrophobic surfaces (methylated quartz) of systematically varying roughness from ∼2 nm to ∼390 nm but the same surface chemistry and (methyl group) coverage. The combination of the surface roughness and methylation chemistry resulted in hydrophobic and superhydrophobic behavior. The variations in surface roughness could account for 75-fold variation in the number of adhering bacteria, indicating the importance of surface topography and the presence of interstitial air for such processes. For hydrophobic surfaces, a strong correlation between roughness ratio and bacterial adhesion was obtained while autocorrelation length (related to the interasperity spacing) was not found to be correlated with bacterial adhesion. Both increased effective surface area with increasing roughness and decreased activation energy with increased surface roughness were concluded to enhance the extent of bacterial adhesion. For the cases of superhydrophobic surfaces, the combination of factors included (i) the surpassing of Laplace pressure force of interstitial air over bacterial adhesive force, (ii) the reduced effective substrate area for bacteria wall due to air gaps to have direct contact, and (iii) the reduction of the attractive van der Waals force that holds adhering bacteria on the substrate (the energy barrier of bacterial desorption/removal). These findings were validated for Gram-negative Salmonella typhimurium LT2 and Escherichia coli O157:H7 as well as Gram-positive Listeria innocua. Overall, this study brings about new insights into bacterial adhesion in the context of surface roughness. We anticipate that such knowledge is important for the design of engineering surfaces, coatings, devices, components, and systems as well as the understanding bacterial contamination scenarios emerging in various fields.

Acknowledgments

This work is supported by the Food Manufacturing Technologies Program, A1363 [2019-68015-29231]; the USDA National Institute of Food and Agriculture [TEX09762]. This work is also partially supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) [2019R1G1A1100629] and the Soft Chemical Materials Research Center for Organic–Inorganic Multidimensional Structures, which is funded by the Gyeonggi Regional Research Center Program [GRRCDankook2016-B02]. This project was partially supported by the National Science Foundation (NSF) [1511626] and [1826250]. In addition, this work was partly supported by the USDA National Institute of Food and Agriculture - Specialty Crop Research Initiative (SCRI) under C-REEMS Grant Proposal Number of 2021-07786 and the tracking number of GRANT13369273.

Data Availability Statement

The anonymized data that supports the findings of this study are available from the corresponding author upon reasonable request.

Supporting Information Available

The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.3c00091.

  • ATR-FTIR and XPS spectra for quartz, AFM micrograph for bacterial cells, larger SEM images, detailed explanation for the SEI simulation, and further data analysis (PDF)

Author Contributions

Project was conceived by Mustafa E. S. Akbulut and experiments were designed by Jun Kyun Oh. Conceptualization was done by Mustafa E. S. Akbulut and Younjin Min. Laboratory work was done by Jun Kyun Oh, Shuhao Liu, William DeFlorio, Li Hao, and Karla Solis Salazar. Modeling of colloidal interactions was carried out by Minchen Mu. Data analysis was performed by William DeFlorio, Jun Kyun Oh, and Shuhao Liu. Manuscript was written by Shuhao Liu and Minchen Mu and edited by William DeFlorio, Xunhao Wang, Luis Cisneros-Zevallos, Alejandro Castillo, Matthew Taylor, Younjin Min, and Mustafa E. S. Akbulut.

Author Contributions

# M.M., S.L. and J.K.O. contributed equally to this work.

The authors declare no competing financial interest.

Supplementary Material

la3c00091_si_001.pdf (8.1MB, pdf)

References

  1. Tosteson T. R.; Revuelta R.; Zaidi B. R.; Imam S. H.; Bard R. F. Aggregation-Adhesion Enhancing Macromolecules and the Specificity of Marine Microbial Surface Interactions. J. Colloid Interface Sci. 1985, 104 (1), 60–71. 10.1016/0021-9797(85)90009-8. [DOI] [Google Scholar]
  2. Perera-Costa D.; Bruque J. M.; González-Martín M. L.; Gómez-García A. C.; Vadillo-Rodríguez V. Studying the Influence of Surface Topography on Bacterial Adhesion Using Spatially Organized Microtopographic Surface Patterns. Langmuir 2014, 30 (16), 4633–4641. 10.1021/la5001057. [DOI] [PubMed] [Google Scholar]
  3. Castigliano M.; Recupido F.; Petala M.; Kostoglou M.; Caserta S.; Karapantsios T. D. Wetting of Dehydrated Hydrophilic Pseudomonas Fluorescens Biofilms under the Action of External Body Forces. Langmuir 2021, 37 (37), 10890–10901. 10.1021/acs.langmuir.1c00528. [DOI] [PMC free article] [PubMed] [Google Scholar]
  4. Høiby N. A Short History of Microbial Biofilms and Biofilm Infections. Apmis 2017, 125 (4), 272–275. 10.1111/apm.12686. [DOI] [PubMed] [Google Scholar]
  5. Gram L.; Ravn L.; Rasch M.; Bruhn J. B.; Christensen A. B.; Givskov M. Food Spoilage—Interactions between Food Spoilage Bacteria. Int. J. Food Microbiol. 2002, 78 (1–2), 79–97. 10.1016/S0168-1605(02)00233-7. [DOI] [PubMed] [Google Scholar]
  6. Benhamou N.; Kloepper J. W.; Quadt-Hallman A.; Tuzun S. Induction of Defense-Related Ultrastructural Modifications in Pea Root Tissues Inoculated with Endophytic Bacteria. Plant Physiol 1996, 112 (3), 919–929. 10.1104/pp.112.3.919. [DOI] [PMC free article] [PubMed] [Google Scholar]
  7. Mansfield J.; Genin S.; Magori S.; Citovsky V.; Sriariyanum M.; Ronald P.; Dow M. A. X.; Verdier V.; Beer S. V.; Machado M. A.; et al. Top 10 Plant Pathogenic Bacteria in Molecular Plant Pathology. Mol. Plant Pathol 2012, 13 (6), 614–629. 10.1111/j.1364-3703.2012.00804.x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  8. Moore-Ott J. A.; Chiu S.; Amchin D. B.; Bhattacharjee T.; Datta S. S. A Biophysical Threshold for Biofilm Formation. Elife 2022, 11, 76380. 10.7554/eLife.76380. [DOI] [PMC free article] [PubMed] [Google Scholar]
  9. Vaccari L.; Molaei M.; Niepa T. H. R.; Lee D.; Leheny R. L.; Stebe K. J. Films of Bacteria at Interfaces. Adv. Colloid Interface Sci. 2017, 247, 561–572. 10.1016/j.cis.2017.07.016. [DOI] [PubMed] [Google Scholar]
  10. Martínez-Pedrero F.; Tierno P. Advances in Colloidal Manipulation and Transport via Hydrodynamic Interactions. J. Colloid Interface Sci. 2018, 519, 296–311. 10.1016/j.jcis.2018.02.062. [DOI] [PubMed] [Google Scholar]
  11. Leontev A.; Bar-On R.; Bass M.; Jurić M.; Schmetz C.; Freger V. Spatial Pattern and Surface-Specificity of Particle and Microorganism Deposition and Attachment: Modeling, Analytic Solution and Experimental Test. J. Colloid Interface Sci. 2021, 584, 45–56. 10.1016/j.jcis.2020.09.098. [DOI] [PubMed] [Google Scholar]
  12. Shim J.; Nikolov A.; Wasan D. Escherichia Coli Removal from Model Substrates: Underlying Mechanism Based on Nanofluid Structural Forces. J. Colloid Interface Sci. 2017, 498, 112–122. 10.1016/j.jcis.2017.03.050. [DOI] [PubMed] [Google Scholar]
  13. Razavi S.; Koplik J.; Kretzschmar I. Molecular Dynamics Simulations: Insight into Molecular Phenomena at Interfaces. Langmuir 2014, 30 (38), 11272–11283. 10.1021/la500376z. [DOI] [PubMed] [Google Scholar]
  14. Erfani A.; Seaberg J.; Aichele C. P.; Ramsey J. D. Interactions between Biomolecules and Zwitterionic Moieties: A Review. Biomacromolecules 2020, 21 (7), 2557–2573. 10.1021/acs.biomac.0c00497. [DOI] [PubMed] [Google Scholar]
  15. Liu L.; Ercan B.; Sun L.; Ziemer K. S.; Webster T. J. Understanding the Role of Polymer Surface Nanoscale Topography on Inhibiting Bacteria Adhesion and Growth. ACS Biomater Sci. Eng. 2016, 2 (1), 122–130. 10.1021/acsbiomaterials.5b00431. [DOI] [PubMed] [Google Scholar]
  16. van Loosdrecht M. C.; Lyklema J.; Norde W.; Schraa G.; Zehnder A. J. The Role of Bacterial Cell Wall Hydrophobicity in Adhesion. Appl. Environ. Microbiol. 1987, 53 (8), 1893–1897. 10.1128/aem.53.8.1893-1897.1987. [DOI] [PMC free article] [PubMed] [Google Scholar]
  17. Poortinga A. T.; Bos R.; Norde W.; Busscher H. J. Electric Double Layer Interactions in Bacterial Adhesion to Surfaces. Surf. Sci. Rep 2002, 47 (1), 1–32. 10.1016/S0167-5729(02)00032-8. [DOI] [Google Scholar]
  18. de Kerchove A. J.; Elimelech M. Relevance of Electrokinetic Theory for “Soft” Particles to Bacterial Cells: Implications for Bacterial Adhesion. Langmuir 2005, 21 (14), 6462–6472. 10.1021/la047049t. [DOI] [PubMed] [Google Scholar]
  19. Azeredo J.; Visser J.; Oliveira R. Exopolymers in Bacterial Adhesion: Interpretation in Terms of DLVO and XDLVO Theories. Colloids Surf. B Biointerfaces 1999, 14 (1–4), 141–148. 10.1016/S0927-7765(99)00031-4. [DOI] [Google Scholar]
  20. Yamamoto T.; Emura C.; Oya M. Cellular Automaton Simulation of the Diffusive Motion of Bacteria and Their Adhesion to Nanostructures on a Solid Surface. Comput. Biol. Med. 2016, 79, 173–181. 10.1016/j.compbiomed.2016.10.017. [DOI] [PubMed] [Google Scholar]
  21. Hong Z.; Jiang J.; Li J.; Xu R.; Yan J. Adhesion Mediated Transport of Bacterial Pathogens in Saturated Sands Coated by Phyllosilicates and Al-Oxides. Colloids Surf. B Biointerfaces 2019, 181, 215–225. 10.1016/j.colsurfb.2019.05.044. [DOI] [PubMed] [Google Scholar]
  22. Yao X.; Walter J.; Burke S.; Stewart S.; Jericho M. H.; Pink D.; Hunter R.; Beveridge T. J. Atomic Force Microscopy and Theoretical Considerations of Surface Properties and Turgor Pressures of Bacteria. Colloids Surf. B Biointerfaces 2002, 23 (2–3), 213–230. 10.1016/S0927-7765(01)00249-1. [DOI] [Google Scholar]
  23. Oh Y. J.; Hubauer-Brenner M.; Gruber H. J.; Cui Y.; Traxler L.; Siligan C.; Park S.; Hinterdorfer P. Curli Mediate Bacterial Adhesion to Fibronectin via Tensile Multiple Bonds. Sci. Rep 2016, 6 (1), 1–8. 10.1038/srep33909. [DOI] [PMC free article] [PubMed] [Google Scholar]
  24. DeBenedictis E. P.; Liu J.; Keten S. Adhesion Mechanisms of Curli Subunit CsgA to Abiotic Surfaces. Sci. Adv. 2016, 2 (11), e1600998 10.1126/sciadv.1600998. [DOI] [PMC free article] [PubMed] [Google Scholar]
  25. Beloin C.; Houry A.; Froment M.; Ghigo J.-M.; Henry N. A Short-Time Scale Colloidal System Reveals Early Bacterial Adhesion Dynamics. PLoS Biol. 2008, 6 (7), e167 10.1371/journal.pbio.0060167. [DOI] [PMC free article] [PubMed] [Google Scholar]
  26. Bullitt E.; Makowski L. Structural Polymorphism of Bacterial Adhesion Pili. Nature 1995, 373 (6510), 164–167. 10.1038/373164a0. [DOI] [PubMed] [Google Scholar]
  27. Koutsoudis M. D.; Tsaltas D.; Minogue T. D.; von Bodman S. B. Quorum-Sensing Regulation Governs Bacterial Adhesion, Biofilm Development, and Host Colonization in Pantoea Stewartii Subspecies Stewartii. Proc. Natl. Acad. Sci. U. S. A. 2006, 103 (15), 5983–5988. 10.1073/pnas.0509860103. [DOI] [PMC free article] [PubMed] [Google Scholar]
  28. Lui L. T.; Xue X.; Sui C.; Brown A.; Pritchard D. I.; Halliday N.; Winzer K.; Howdle S. M.; Fernandez-Trillo F.; Krasnogor N.; Alexander C. Bacteria Clustering by Polymers Induces the Expression of Quorum-Sensing-Controlled Phenotypes. Nat. Chem. 2013, 5 (12), 1058. 10.1038/nchem.1793. [DOI] [PMC free article] [PubMed] [Google Scholar]
  29. Sauer M. M.; Jakob R. P.; Eras J.; Baday S.; Eriş D.; Navarra G.; Berneche S.; Ernst B.; Maier T.; Glockshuber R. Catch-Bond Mechanism of the Bacterial Adhesin FimH. Nat. Commun. 2016, 7 (1), 1–13. 10.1038/ncomms10738. [DOI] [PMC free article] [PubMed] [Google Scholar]
  30. Marine J.; Myers C. P.; Picquet G. A.; Zaidel L. A.; Wu D.; Uhrich K. E. Reduction of Bacterial Attachment on Hydroxyapatite Surfaces: Using Hydrophobicity and Chemical Functionality to Enhance Surface Retention and Prevent Attachment. Colloids Surf. B Biointerfaces 2018, 167, 531–537. 10.1016/j.colsurfb.2018.04.045. [DOI] [PubMed] [Google Scholar]
  31. Majhi S.; Mishra A.. Modulating Surface Energy and Surface Roughness for Inhibiting Microbial Growth. In Engineered Antimicrobial Surfaces; Springer, 2020; pp 109–121. [Google Scholar]
  32. Oh J. K.; Perez K.; Kohli N.; Kara V.; Li J.; Min Y.; Castillo A.; Taylor M.; Jayaraman A.; Cisneros-Zevallos L.; Akbulut M. Hydrophobically-Modified Silica Aerogels: Novel Food-Contact Surfaces with Bacterial Anti-Adhesion Properties. Food Control 2015, 52 (0), 132–141. 10.1016/j.foodcont.2014.12.029. [DOI] [Google Scholar]
  33. Yuan Y.; Hays M. P.; Hardwidge P. R.; Kim J. Surface Characteristics Influencing Bacterial Adhesion to Polymeric Substrates. RSC Adv. 2017, 7 (23), 14254–14261. 10.1039/C7RA01571B. [DOI] [Google Scholar]
  34. Ren Y.; Wang C.; Chen Z.; Allan E.; van der Mei H. C.; Busscher H. J. Emergent Heterogeneous Microenvironments in Biofilms: Substratum Surface Heterogeneity and Bacterial Adhesion Force-Sensing. FEMS Microbiol Rev. 2018, 42 (3), 259–272. 10.1093/femsre/fuy001. [DOI] [PubMed] [Google Scholar]
  35. Ostvar S.; Wood B. D. Multiscale Model Describing Bacterial Adhesion and Detachment. Langmuir 2016, 32 (20), 5213–5222. 10.1021/acs.langmuir.6b00882. [DOI] [PubMed] [Google Scholar]
  36. Yang M.; Ding Y.; Ge X.; Leng Y. Control of Bacterial Adhesion and Growth on Honeycomb-like Patterned Surfaces. Colloids Surf. B Biointerfaces 2015, 135, 549–555. 10.1016/j.colsurfb.2015.08.010. [DOI] [PubMed] [Google Scholar]
  37. Zhang M.; Oh J. K.; Huang S.-Y.; Lin Y.-R.; Liu Y.; Mannan M. S.; Cisneros-Zevallos L.; Akbulut M. Priming with Nano-Aerosolized Water and Sequential Dip-Washing with Hydrogen Peroxide: An Efficient Sanitization Method to Inactivate Salmonella Typhimurium LT2 on Spinach. J. Food Eng. 2015, 161, 8. 10.1016/j.jfoodeng.2015.03.026. [DOI] [Google Scholar]
  38. Truong V. K.; Lapovok R.; Estrin Y. S.; Rundell S.; Wang J. Y.; Fluke C. J.; Crawford R. J.; Ivanova E. P. The Influence of Nano-Scale Surface Roughness on Bacterial Adhesion to Ultrafine-Grained Titanium. Biomaterials 2010, 31, 3674–3683. 10.1016/j.biomaterials.2010.01.071. [DOI] [PubMed] [Google Scholar]
  39. Wu S.; Altenried S.; Zogg A.; Zuber F.; Maniura-Weber K.; Ren Q. Role of the Surface Nanoscale Roughness of Stainless Steel on Bacterial Adhesion and Microcolony Formation. ACS Omega 2018, 3 (6), 6456–6464. 10.1021/acsomega.8b00769. [DOI] [PMC free article] [PubMed] [Google Scholar]
  40. Anselme K.; Davidson P.; Popa A. M.; Giazzon M.; Liley M.; Ploux L. The Interaction of Cells and Bacteria with Surfaces Structured at the Nanometre Scale. Acta Biomater 2010, 6 (10), 3824–3846. 10.1016/j.actbio.2010.04.001. [DOI] [PubMed] [Google Scholar]
  41. Elbourne A.; Crawford R. J.; Ivanova E. P. Nano-Structured Antimicrobial Surfaces: From Nature to Synthetic Analogues. J. Colloid Interface Sci. 2017, 508, 603–616. 10.1016/j.jcis.2017.07.021. [DOI] [PubMed] [Google Scholar]
  42. Straub H.; Bigger C. M.; Valentin J.; Abt D.; Qin X.; Eberl L.; Maniura-Weber K.; Ren Q. Bacterial Adhesion on Soft Materials: Passive Physicochemical Interactions or Active Bacterial Mechanosensing?. Adv. Healthc Mater. 2019, 8 (8), 1801323. 10.1002/adhm.201801323. [DOI] [PubMed] [Google Scholar]
  43. Balebona M. C.; Morinigo M. A.; Faris A.; Krovacek K.; Månsson I.; Bordas M. A.; Borrego J. J. Influence of Salinity and PH on the Adhesion of Pathogenic Vibrio Strains to Sparus Aurata Skin Mucus. Aquaculture 1995, 132 (1–2), 113–120. 10.1016/0044-8486(94)00376-Y. [DOI] [Google Scholar]
  44. Bunt C. R.; Jones D. S.; Tucker I. G. The Effects of PH, Ionic Strength and Organic Phase on the Bacterial Adhesion to Hydrocarbons (BATH) Test. Int. J. Pharm. 1993, 99 (2–3), 93–98. 10.1016/0378-5173(93)90350-O. [DOI] [Google Scholar]
  45. Zita A.; Hermansson M. Effects of Ionic Strength on Bacterial Adhesion and Stability of Flocs in a Wastewater Activated Sludge System. Appl. Environ. Microbiol. 1994, 60 (9), 3041–3048. 10.1128/aem.60.9.3041-3048.1994. [DOI] [PMC free article] [PubMed] [Google Scholar]
  46. Chen G.; Walker S. L. Role of Solution Chemistry and Ion Valence on the Adhesion Kinetics of Groundwater and Marine Bacteria. Langmuir 2007, 23 (13), 7162–7169. 10.1021/la0632833. [DOI] [PubMed] [Google Scholar]
  47. Duffy G.; Sheridan J. J. The Effect of Temperature, PH and Medium in a Surface Adhesion Immunofluorescent Technique for Detection of Listeria Monocytogenes. J. Appl. Microbiol. 1997, 83 (1), 95–101. 10.1111/j.1361-5072.1997.00195.x. [DOI] [PubMed] [Google Scholar]
  48. McEldowney S.; Fletcher M. Effect of PH, Temperature, and Growth Conditions on the Adhesion of a Gliding Bacterium and Three Nongliding Bacteria to Polystyrene. Microb Ecol 1988, 16 (2), 183–195. 10.1007/BF02018913. [DOI] [PubMed] [Google Scholar]
  49. Thomas W. E.; Trintchina E.; Forero M.; Vogel V.; Sokurenko E. V. Bacterial Adhesion to Target Cells Enhanced by Shear Force. Cell 2002, 109, 913–923. 10.1016/S0092-8674(02)00796-1. [DOI] [PubMed] [Google Scholar]
  50. Duddridge J. E.; Kent C. A.; Laws J. F. Effect of Surface Shear Stress on the Attachment of Pseudomonas Fluorescens to Stainless Steel under Defined Flow Conditions. Biotechnol. Bioeng. 1982, 24 (1), 153–164. 10.1002/bit.260240113. [DOI] [PubMed] [Google Scholar]
  51. Dickinson R. B.; Cooper S. L. Analysis of Shear-dependent Bacterial Adhesion Kinetics to Biomaterial Surfaces. AIChE J. 1995, 41 (9), 2160–2174. 10.1002/aic.690410915. [DOI] [Google Scholar]
  52. Lecuyer S.; Rusconi R.; Shen Y.; Forsyth A.; Vlamakis H.; Kolter R.; Stone H. A. Shear Stress Increases the Residence Time of Adhesion of Pseudomonas Aeruginosa. Biophys. J. 2011, 100 (2), 341–350. 10.1016/j.bpj.2010.11.078. [DOI] [PMC free article] [PubMed] [Google Scholar]
  53. Yoda I.; Koseki H.; Tomita M.; Shida T.; Horiuchi H.; Sakoda H.; Osaki M. Effect of Surface Roughness of Biomaterials on Staphylococcus Epidermidis Adhesion. BMC Microbiol 2014, 14 (1), 1–7. 10.1186/s12866-014-0234-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
  54. Bohinc K.; Drazic G.; Fink R.; Oder M.; Jevsnik M.; Nipic D.; Godic-Torkar K.; Raspor P. Available Surface Dictates Microbial Adhesion Capacity. Int. J. Adhes Adhes 2014, 50, 265–272. 10.1016/j.ijadhadh.2014.01.027. [DOI] [Google Scholar]
  55. Scheuerman T. R.; Camper A. K.; Hamilton M. A. Effects of Substratum Topography on Bacterial Adhesion. J. Colloid Interface Sci. 1998, 208 (1), 23–33. 10.1006/jcis.1998.5717. [DOI] [PubMed] [Google Scholar]
  56. Hilbert L. R.; Bagge-Ravn D.; Kold J.; Gram L. Influence of Surface Roughness of Stainless Steel on Microbial Adhesion and Corrosion Resistance. Int. Biodeterior Biodegradation 2003, 52 (3), 175–185. 10.1016/S0964-8305(03)00104-5. [DOI] [Google Scholar]
  57. Truong V. K.; Lapovok R.; Estrin Y. S.; Rundell S.; Wang J. Y.; Fluke C. J.; Crawford R. J.; Ivanova E. P. The Influence of Nano-Scale Surface Roughness on Bacterial Adhesion to Ultrafine-Grained Titanium. Biomaterials 2010, 31, 3674–3683. 10.1016/j.biomaterials.2010.01.071. [DOI] [PubMed] [Google Scholar]
  58. Encinas N.; Yang C. Y.; Geyer F.; Kaltbeitzel A.; Baumli P.; Reinholz J.; Mailänder V.; Butt H. J.; Vollmer D. Submicrometer-Sized Roughness Suppresses Bacteria Adhesion. ACS Applied Materials and Interfaces. 2020, 12, 21192. 10.1021/acsami.9b22621. [DOI] [PMC free article] [PubMed] [Google Scholar]
  59. Jang Y.; Choi W. T.; Johnson C. T.; García A. J.; Singh P. M.; Breedveld V.; Hess D. W.; Champion J. A. Inhibition of Bacterial Adhesion on Nanotextured Stainless Steel 316L by Electrochemical Etching. ACS Biomater Sci. Eng. 2018, 4 (1), 90–97. 10.1021/acsbiomaterials.7b00544. [DOI] [PMC free article] [PubMed] [Google Scholar]
  60. Schirone M.; Visciano P.; Tofalo R.; Suzzi G. Foodborne Pathogens: Hygiene and Safety. Front Microbiol 2019, 10, 1974. 10.3389/fmicb.2019.01974. [DOI] [PMC free article] [PubMed] [Google Scholar]
  61. Heredia N.; García S. Animals as Sources of Food-Borne Pathogens: A Review. Animal nutrition 2018, 4 (3), 250–255. 10.1016/j.aninu.2018.04.006. [DOI] [PMC free article] [PubMed] [Google Scholar]
  62. Zhang M.; Oh J. K.; Cisneros-Zevallos L.; Akbulut M. Bactericidal Effects of Nonthermal Low-Pressure Oxygen Plasma on S. Typhimurium LT2 Attached to Fresh Produce Surfaces. J. Food Eng. 2013, 119 (3), 425. 10.1016/j.jfoodeng.2013.05.045. [DOI] [Google Scholar]
  63. Zhang M.; Yang F.; Pasupuleti S.; Oh J. K.; Kohli N.; Lee I.-S.; Perez K.; Verkhoturov S. V.; Schweikert E. A.; Jayaraman A.; Cisneros-Zevallos L.; Akbulut M. Preventing Adhesion of Escherichia Coli O157:H7 and Salmonella Typhimurium LT2 on Tomato Surfaces via Ultrathin Polyethylene Glycol Film. Int. J. Food Microbiol. 2014, 185 (0), 73–81. 10.1016/j.ijfoodmicro.2014.05.019. [DOI] [PubMed] [Google Scholar]
  64. Liu S.; Zheng J.; Hao L.; Yegin Y.; Bae M.; Ulugun B.; Taylor T. M.; Scholar E. A.; Cisneros-Zevallos L.; Oh J. K.; Akbulut M. Dual-Functional, Superhydrophobic Coatings with Bacterial Anticontact and Antimicrobial Characteristics. ACS Appl. Mater. Interfaces 2020, 12 (19), 21311–21321. 10.1021/acsami.9b18928. [DOI] [PubMed] [Google Scholar]
  65. Oh J. K.; Lu X.; Min Y.; Cisneros-Zevallos L.; Akbulut M. Bacterially Antiadhesive, Optically Transparent Surfaces Inspired from Rice Leaves. ACS Appl. Mater. Interfaces 2015, 7 (34), 19274–19281. 10.1021/acsami.5b05198. [DOI] [PubMed] [Google Scholar]
  66. Liao C. H.; Shollenberger L. M. Survivability and Long-Term Preservation of Bacteria in Water and in Phosphate-Buffered Saline. Lett. Appl. Microbiol 2003, 37 (1), 45–50. 10.1046/j.1472-765X.2003.01345.x. [DOI] [PubMed] [Google Scholar]
  67. Moriarty T. F.; Poulsson A. H. C.; Rochford E. T. J.; Richards R. G.. Comprehensive Biomaterials II; Elsevier, 2011; Vol. 4. [Google Scholar]
  68. Bhattacharjee S.; Elimelech M. Surface Element Integration: A Novel Technique for Evaluation of DLVO Interaction between a Particle and a Flat Plate. J. Colloid Interface Sci. 1997, 193 (2), 273–285. 10.1006/jcis.1997.5076. [DOI] [PubMed] [Google Scholar]
  69. Singh A. V.; Galluzzi M.; Borghi F.; Indrieri M.; Vyas V.; Podestà A.; Gade W. N. Interaction of Bacterial Cells with Cluster-Assembled Nanostructured Titania Surfaces: An Atomic Force Microscopy Study. J. Nanosci Nanotechnol 2013, 13 (1), 77–85. 10.1166/jnn.2013.6727. [DOI] [PubMed] [Google Scholar]
  70. Rizzello L.; Sorce B.; Sabella S.; Vecchio G.; Galeone A.; Brunetti V.; Cingolani R.; Pompa P. P. Impact of Nanoscale Topography on Genomics and Proteomics of Adherent Bacteria. ACS Nano 2011, 5 (3), 1865–1876. 10.1021/nn102692m. [DOI] [PubMed] [Google Scholar]
  71. Doi M.; Edwards S. F. Dynamics of Concentrated Polymer Systems Part 2. Molecular Motion under Flow. Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics 1978, 74, 1802–1817. 10.1039/F29787401802. [DOI] [Google Scholar]
  72. Doi M.; Edwards S. F. Dynamics of Concentrated Polymer Systems Part 1. Brownian Motion in the Equilibrium State. Journal of the Chemical Society, Faraday Transactions 2: Molecular and Chemical Physics 1978, 74, 1789–1801. 10.1039/F29787401789. [DOI] [Google Scholar]
  73. Tang S.; Evans G. T.; Mason C. P.; Allen M. P. Shear Viscosity for Fluids of Hard Ellipsoids: A Kinetic Theory and Molecular Dynamics Study. J. Chem. Phys. 1995, 102 (9), 3794–3811. 10.1063/1.468561. [DOI] [Google Scholar]
  74. Tang S.; Evans G. T. A Critique of Slip and Stick Hydrodynamics for Ellipsoidal Bodies. Mol. Phys. 1993, 80 (6), 1443–1457. 10.1080/00268979300103131. [DOI] [Google Scholar]
  75. Zhang M.; Soto-Rodríguez J.; Chen I.-C.; Akbulut M. Adsorption and Removal Dynamics of Polymeric Micellar Nanocarriers Loaded with a Therapeutic Agent on Silica Surfaces. Soft Matter 2013, 9 (42), 10155. 10.1039/c3sm51692j. [DOI] [Google Scholar]
  76. Oh J. K.; Yegin Y.; Yang F.; Zhang M.; Li J.; Huang S.; Verkhoturov S. V.; Schweikert E. A.; Perez-Lewis K.; Scholar E. A.; Taylor T. M.; Castillo A.; Cisneros-Zevallos L.; Min Y.; Akbulut M. The Influence of Surface Chemistry on the Kinetics and Thermodynamics of Bacterial Adhesion. Sci. Rep 2018, 8 (1), 17247. 10.1038/s41598-018-35343-1. [DOI] [PMC free article] [PubMed] [Google Scholar]
  77. Turner R. D.; Hurd A. F.; Cadby A.; Hobbs J. K.; Foster S. J. Cell Wall Elongation Mode in Gram-Negative Bacteria Is Determined by Peptidoglycan Architecture. Nat. Commun. 2013, 4 (1), 1–8. 10.1038/ncomms2503. [DOI] [PMC free article] [PubMed] [Google Scholar]
  78. Furchtgott L.; Wingreen N. S.; Huang K. C. Mechanisms for Maintaining Cell Shape in Rod-Shaped Gram-Negative Bacteria. Mol. Microbiol. 2011, 81 (2), 340. 10.1111/j.1365-2958.2011.07616.x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  79. Li X.; Chen T. Enhancement and Suppression Effects of a Nanopatterned Surface on Bacterial Adhesion. Phys. Rev. E 2016, 93 (5), 52419. 10.1103/PhysRevE.93.052419. [DOI] [PubMed] [Google Scholar]
  80. Hänggi P.; Talkner P.; Borkovec M. Reaction-Rate Theory: Fifty Years after Kramers. Rev. Mod. Phys. 1990, 62 (2), 251. 10.1103/RevModPhys.62.251. [DOI] [Google Scholar]
  81. Prieve D. C.; Ruckenstein E. The Double-Layer Interaction between Dissimilar Ionizable Surfaces and Its Effect on the Rate of Deposition. J. Colloid Interface Sci. 1978, 63 (2), 317–329. 10.1016/0021-9797(78)90141-8. [DOI] [Google Scholar]
  82. Zhang M.; Akbulut M. Adsorption, Desorption, and Removal of Polymeric Nanomedicine on and from Cellulose Surfaces: Effect of Size. Langmuir 2011, 27 (20), 12550–12559. 10.1021/la202287k. [DOI] [PubMed] [Google Scholar]
  83. Eskhan A.; Abu-Lail N. I. Force-Averaging DLVO Model Predictions of the Adhesion Strengths Quantified for Pathogenic Listeria Monocytogenes EGDe Grown under Variable PH Stresses. Langmuir 2020, 36 (30), 8947–8964. 10.1021/acs.langmuir.0c01500. [DOI] [PubMed] [Google Scholar]
  84. Cheng Y.; Feng G.; Moraru C. I. Micro-and Nanotopography Sensitive Bacterial Attachment Mechanisms: A Review. Front Microbiol 2019, 10, 191. 10.3389/fmicb.2019.00191. [DOI] [PMC free article] [PubMed] [Google Scholar]
  85. Bai H.; Cochet N.; Pauss A.; Lamy E. DLVO, Hydrophobic, Capillary and Hydrodynamic Forces Acting on Bacteria at Solid-Air-Water Interfaces: Their Relative Impact on Bacteria Deposition Mechanisms in Unsaturated Porous Media. Colloids Surf. B Biointerfaces 2017, 150, 41–49. 10.1016/j.colsurfb.2016.11.004. [DOI] [PubMed] [Google Scholar]
  86. Dorobantu L. S.; Bhattacharjee S.; Foght J. M.; Gray M. R. Analysis of Force Interactions between AFM Tips and Hydrophobic Bacteria Using DLVO Theory. Langmuir 2009, 25 (12), 6968–6976. 10.1021/la9001237. [DOI] [PubMed] [Google Scholar]
  87. Parajuli S.; Dorris A. L.; Middleton C.; Rodriguez A.; Haver M. O.; Hammer N. I.; Ureña-Benavides E. Surface and Interfacial Interactions in Dodecane/Brine Pickering Emulsions Stabilized by the Combination of Cellulose Nanocrystals and Emulsifiers. Langmuir 2019, 35 (37), 12061–12070. 10.1021/acs.langmuir.9b01218. [DOI] [PubMed] [Google Scholar]
  88. Fang F.; Satulovsky J.; Szleifer I. Kinetics of Protein Adsorption and Desorption on Surfaces with Grafted Polymers. Biophys. J. 2005, 89 (3), 1516–1533. 10.1529/biophysj.104.055079. [DOI] [PMC free article] [PubMed] [Google Scholar]
  89. Tandon V.; Bhagavatula S. K.; Nelson W. C.; Kirby B. J. Zeta Potential and Electroosmotic Mobility in Microfluidic Devices Fabricated from Hydrophobic Polymers: 1. The Origins of Charge. Electrophoresis 2008, 29 (5), 1092–1101. 10.1002/elps.200700734. [DOI] [PubMed] [Google Scholar]
  90. Rijnaarts H. H. M.; Norde W.; Lyklema J.; Zehnder A. J. B. DLVO and Steric Contributions to Bacterial Deposition in Media of Different Ionic Strengths. Colloids Surf. B Biointerfaces 1999, 14 (1–4), 179–195. 10.1016/S0927-7765(99)00035-1. [DOI] [Google Scholar]
  91. Yoshimoto S.; Ohara Y.; Nakatani H.; Hori K. Reversible Bacterial Immobilization Based on the Salt-Dependent Adhesion of the Bacterionanofiber Protein AtaA. Microb Cell Fact 2017, 16 (1), 1–11. 10.1186/s12934-017-0740-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  92. Araújo G. R. de S.; Viana N. B.; Gómez F.; Pontes B.; Frases S. The Mechanical Properties of Microbial Surfaces and Biofilms. Cell Surface 2019, 5, 100028. 10.1016/j.tcsw.2019.100028. [DOI] [PMC free article] [PubMed] [Google Scholar]
  93. Alam F.; Kumar S.; Varadarajan K. M. Quantification of Adhesion Force of Bacteria on the Surface of Biomaterials: Techniques and Assays. ACS Biomater Sci. Eng. 2019, 5 (5), 2093–2110. 10.1021/acsbiomaterials.9b00213. [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

la3c00091_si_001.pdf (8.1MB, pdf)

Data Availability Statement

The anonymized data that supports the findings of this study are available from the corresponding author upon reasonable request.


Articles from Langmuir are provided here courtesy of American Chemical Society

RESOURCES