Table 1. Thermal Properties of PLA and PLA/ILs in the 1st and 2nd Heating Cycles.

samples	1st heating					2nd heating
	Tg	Tcc	Tm	ΔHm	Xc (%)	Tg	Tcc	Tm	ΔHm	Xc (%)
PLA	59.2 ± 0.2	94.3 ± 0.5	150.8 ± 0.3	26.2 ± 0.5	27.9 ± 0.5	59.5 ± 0.2	123.3 ± 0.3	148.7 ± 0.4	19.5 ± 0.6	20.8 ± 0.3
PLA/3di	60.0 ± 0.2	87.7 ± 0.4	149.0 ± 0.5	29.1 ± 0.4	32.0 ± 0.4	58.4 ± 0.3	120.0 ± 0.4	148.1 ± 0.2	30.1 ± 0.4	33.1 ± 0.4
PLA/5di	56.0 ± 0.3	87.5 ± 0.4	150.3 ± 0.4	32.7 ± 0.3	36.7 ± 0.3	56.9 ± 0.3	118.7 ± 0.5	147.4 ± 0.3	29.2 ± 0.5	32.8 ± 0.5
PLA/10di	54.6 ± 0.4	85.8 ± 0.5	150.2 ± 0.2	31.2 ± 0.2	37.0 ± 0.2	54.2 ± 0.5	123.5 ± 0.6	145.9 ± 0.7	21.0 ± 0.7	24.9 ± 0.7
PLA/3tri	59.4 ± 0.3	86.7 ± 0.4	150.1 ± 0.3	32.1 ± 0.6	35.3 ± 0.6	57.4 ± 0.2	119.1 ± 0.7	147.6 ± 0.4	27.1 ± 0.3	29.8 ± 0.3
PLA/5tri	57.6 ± 0.3	87.5 ± 0.2	150.2 ± 0.2	31.0 ± 0.3	34.8 ± 0.3	58.0 ± 0.2	120.8 ± 0.5	147.3 ± 0.3	21.1 ± 0.6	23.7 ± 0.6
PLA/10tri	55.0 ± 0.5	101.4 ± 0.5	149.9 ± 0.4	31.5 ± 0.2	37.3 ± 0.2	54.1 ± 0.4	118.8 ± 0.3	146.7 ± 0.4	25.7 ± 0.4	30.5 ± 0.4
PLA/3tetra	57.7 ± 0.3	88.1 ± 0.6	150.9 ± 0.5	34.2 ± 0.4	37.6 ± 0.4	58.1 ± 0.3	121.6 ± 0.4	148.3 ± 0.2	21.7 ± 0.5	23.9 ± 0.5
PLA/5tetra	57.4 ± 0.1	87.9 ± 0.5	150.1 ± 0.5	31.1 ± 0.5	34.9 ± 0.5	57.5 ± 0.2	119.4 ± 0.4	146.8 ± 0.5	24.6 ± 0.3	27.6 ± 0.3
PLA/10tetra	55.1 ± 0.4	90.8 ± 0.7	150.1 ± 0.3	29.7 ± 0.3	35.2 ± 0.3	55.1 ± 0.5	122.3 ± 0.2	147.8 ± 0.2	19.5 ± 0.2	23.1 ± 0.2