Skip to main content
. Author manuscript; available in PMC: 2024 Feb 28.
Published in final edited form as: Annu Int Conf IEEE Eng Med Biol Soc. 2020 Jul;2020:6107–6110. doi: 10.1109/EMBC44109.2020.9175724

Figure 4.

Figure 4.

(A) Generic wire (red) used during experiments shaped to a 3D-printed DBS lead trajectory guide (white) of patient ID2. (B) Fluoroptic probe securely attached to the tip of the generic wire for temperature measurements. (C) Wire and fluoroptic probe were implanted into the anthropomorphic gel head phantom for imaging at 1.5 T. CT image included for comparison between the patient-derived DBS lead trajectory and the trajectory of the implanted wire.