. Author manuscript; available in PMC: 2024 Mar 19.

Published in final edited form as: Mater Perform Charact. 2024 Feb;13(2):10.1520/mpc20230080. doi: 10.1520/mpc20230080

TABLE 2.

Comparison between predicted and measured initial crack sizes. Acceptable and unacceptable predictions are highlighted in green and red, respectively

Data Set	Specimen Geometry	a_o,meas, mm	ASTM		CA1		CA2		UTA		CSS-1		CSS-2
Data Set	Specimen Geometry	a_o,meas, mm	a_oq, mm	Δa_o, mm	a_oq, mm	Δa_o, mm	a_oq, mm	Δa_o, mm	a_oq, mm	Δa_o, mm	a_oq, mm	Δa_o, mm	a_oq, mm	Δa_o, mm
ASTM-DS4	SE(B)	33.45	31.26	−2.19	31.16	−2.29	33.54	0.09	31.33	−2.12	32.76	−0.69	31.38	−2.07
ASTM-DS5	C(T)	29.97	30.31	0.34	30.26	0.29	30.60	0.63	30.36	0.39	30.90	0.93	30.36	0.39
ASTM-DS7	SE(B)	27.91	27.56	−0.35	27.53	−0.38	27.56	−0.35	27.59	−0.32	28.80	0.89	27.59	−0.32
900HIP_4_N_a	PCCv	4.99	4.52	−0.47	4.52	−0.47	5.56	0.57	5.05	0.06	5.44	0.45	5.08	0.09
AN-4–1	PCCv	5.23	4.93	−0.30	4.63	−0.60	5.25	0.02	5.17	−0.07	5.09	−0.14	5.28	0.04
AS-4–3	PCCv	4.96	4.67	−0.29	4.35	−0.61	4.47	−0.49	4.87	−0.09	4.78	−0.18	4.88	−0.08
CN-5–4	PCCv	5.12	4.80	−0.33	4.45	−0.67	4.28	−0.84	5.17	0.05	4.92	−0.20	5.18	0.06
CN-8–3	PCCv	5.07	4.77	−0.29	4.47	−0.59	4.46	−0.61	5.03	−0.04	4.90	−0.16	5.12	0.06
BBL-CGW_23	C(T)	25.07	24.35	−0.72	24.30	−0.77	24.40	−0.67	24.52	−0.55	25.34	0.27	24.61	−0.46
W1-F11	PCCv	5.28	5.23	−0.05	5.23	−0.05	5.37	0.09	5.32	0.04	5.23	−0.05	5.23	−0.05
W2-F12	PCCv	5.16	5.01	−0.15	4.97	−0.19	5.01	−0.15	5.07	−0.09	5.13	−0.02	5.01	−0.15
W3-F6	PCCv	5.32	5.17	−0.15	5.12	−0.20	5.35	0.03	5.20	−0.12	5.25	−0.07	5.17	−0.15
W4-F9	PCCv	5.20	4.93	−0.27	4.88	−0.32	5.23	0.03	5.00	−0.20	5.05	−0.15	4.93	−0.27
FW1-A	SE(T)	2.62	2.51	−0.11	2.47	−0.15	2.65	0.03	2.45	−0.17	…	…	2.51	−0.11
FH1-A	SE(T)	2.61	2.46	−0.15	2.38	−0.23	2.66	0.05	2.64	0.03	…	…	2.46	−0.15