. 2024 Mar 9;17(6):1268. doi: 10.3390/ma17061268

Table 2.

Parameters of drawing.

Sample	Draw Ratio (d_r)	Temperature, °C		Spindle Speed, min⁻¹ × 10³
Sample	Draw Ratio (d_r)	Goted	Plate	Spindle Speed, min⁻¹ × 10³
Base fibers	3.35	70	120	6800
Modified fibers with 12% wt. TEC	2.80	60	110	7100
Modified fibers with 5% and 7% wt. of TEC	3.28	70	120	6600
Modified fibers with 5% and 7% wt. of TEC	2.80	70	120	6848
Modified fibers with 5% and 7% wt. of ADO	3.28	70	120	6600
Modified fibers with 5% and 7% wt. of ADO	2.80	70	120	6848