Table 2.
Printing parameters for AESO-based resins printed by LCD 3D printer.
| Parameter | AESO-IBOMA | AESO-IBOMA +5GTF | AESO-IBOMA +5WPL-CF |
AESO-THFA | AESO-THFA +5GTF | AESO-THFA +5WPL-CF |
|---|---|---|---|---|---|---|
|
Layer height
(mm) |
0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 |
|
Exposure time
(s) |
12 | 18 | 18 | 18 | 25 | 25 |
|
Bottom exposure
time (s) |
30 | 40 | 40 | 40 | 45 | 45 |
|
Rest time before lift
(s) |
0 | 3 | 3 | 0 | 5 | 5 |
|
Rest time after lift
(s) |
4 | 8 | 8 | 5 | 8 | 8 |
|
Rest time after retract
(s) |
3 | 6 | 6 | 3 | 6 | 6 |
|
Bottom lift distance
(mm) |
7 | 8 | 8 | 6 | 8 | 8 |
|
Lifting distance
(mm) |
6 | 8 | 8 | 6 | 8 | 8 |
| Bottom retract distance (mm) | 7 | 8 | 8 | 6 | 8 | 8 |
|
Retract distance
(mm) |
6 | 8 | 8 | 6 | 8 | 6 |
|
Bottom lift speed
(mm/min) |
60 | 50 | 50 | 90 | 70 | 70 |
|
Lifting speed
(mm/min) |
60 | 50 | 50 | 90 | 70 | 70 |
| Bottom retract speed (mm/min) | 150 | 130 | 130 | 170 | 150 | 150 |
|
Retract speed
(mm/min) |
150 | 130 | 130 | 170 | 150 | 150 |