Abstract
Clay soils are rock‐decomposed materials comprised of both clay‐ and non‐clay‐like minerals. Clays' physiochemical and mineralogical composition determines their applicability use in cosmetics. Because of their high bioburden, they must be effectively characterized before being incorporated into cosmetics. The scope of the current study was to characterize two different samples of red and white clays for their physical, chemical and biological properties; mined from Durban, South Africa. Characterization was performed using techniques like X‐ray fluorescence, X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscope, hydrogen potential, soil colour, oil absorption, swelling capacity, texture, bulk density, plastic and apparent viscosity, sun protection factor and microbiological analysis.
Keywords: biological, chemical, clays, cosmetic, physical
Abbreviations
- BD
bulk density
- EE
erythemal effect
- FTIR
Fourier‐transform infrared spectroscopy
- KZN
KwaZulu Natal
- SEM
scanning electron microscope
- SPF
sun protection factor
- UV
ultraviolet
- UVB
radiation from the sun with fairly short wavelengths
- XRD
X‐ray diffraction
- XRF
X‐ray fluorescence
1. INTRODUCTION
Clays are widely available, inexpensive, and ecological substances with a multitude of uses in a variety of industrial sectors. 1 , 2 , 3 These soils are typically described as geological, earthy, small‐grained‐grained substances with diameters less than 2 µm; and because of their hydrophilic nature, they exhibit plasticity when wet. 4 Clay soils are used in various pharmaceutical and medicinal products for curative and/or preventive purposes. 5 Given their great area of surface and colloidal dimensions, clays are used as dispersing and anticaking agents in a large number of semisolid medical products. 6 In cases where clays are to be utilized as raw ingredients in the pharmaceutical and cosmetic industry, they have to adhere to both performance and quality standards. 7 Clays application, particularly in cosmetics, is influenced by their mineralogical and chemical makeup. As a result, it is critical to understand their physical, chemical and biological characteristics, by employing the different methods that are available for this purpose. 8 , 9 To improve physicochemical properties, eliminate accessory minerals, and enhance quality, typically, clay raw materials are beneficiated using a variety of methods before being used. Many chemical and physical processes, such as magnetic separation and bleaching, calcination and drying, flotation and selective flocculation, size fractionation, and chemical modification and activation, are involved in the beneficiation of clay. 10 In addition to other biological products, clays are currently used in a number of indigenous therapies throughout the Euro‐Mediterranean and African regions, such as the making of therapeutic mud packs. 11 , 12 , 13 Since ancient times, clays have been used to maintain the conditions of the skin; today, they are found in luxury spas. 14 The most prevalent types of clay discovered within spa environments include bentonite clay, renowned for its ability to absorb surplus sebum; kaolin clay, which enhances circulation to promote skin brightening; and illite clay, utilized for exfoliation and the constricting of pores. 15
Clays are also being used for the purposes of cleansing and beautification. 16 , 17 , 18 , 19 Nowadays, clays are used in soaps and shampoos to improve the lathering ability of the products and to absorb extra oil. The typical formulations include face masks, skin bleaches, and scrubs. A number of clays are used as cosmetic ingredients; magnesium and silica are abundant in rhassoul clay, which is derived from the Moroccan Atlas Mountains. It holds a highly regarded ingredient in skin care products for oily and acne‐prone skin as it is renowned for its ability to draw excess oil and impurities from the skin. On the other hand, smectite clay is exceptionally mild and perfect for individuals with sensitive skin types. It performs marvels by delicately exfoliating the skin and eliminating dead skin cells without causing any irritation. 20
In the KwaZulu‐Natal (KZN) and Eastern Cape provinces of South Africa, red and white clays are widely accessible and are utilized for decorative purposes as well as sun protection and other cosmetic purposes by the Zulu and Xhosa communities. In this study, the potency of the red and white clays from Durban North for cosmetic applications is examined along with their physical, chemical, and microbiological characteristics.
2. MATERIALS AND METHODS
2.1. Sampling area
The red and white clay samples were harvested from uMzinyathi, 29° 30′ 0″ South, 30° 56′ 0″ East in KZN (Northern part of Durban) were bought from the informal traders at the Durban Berea Market where they are sold to people that uses them as sunscreens and other cultural uses. These clays are sold in hardened ball shapes which makes it easy for them to be transported. The samples were brought to the lab and placed in an oven for storage at 40°C for about 48 h to remove moisture and impurities that might be present and therefore grounded into fine powder using a pestle and a mortar and sieved using a 50 µm sieve and stored in a universal container bottle.
2.2. Physical and chemical analysis
Colour determination was done by aerating raw samples for 24 h and thereafter using a spatula to pour clay aggregates on a white cardboard sheet. The hue, value, chroma, and colour were determined by comparing the samples visually to the standard soil colours shown in the Munsell Soil Color Charts. 21 , 22
Samples of clay were tested for pH using a portable pH meter (HANNA HI9828). Following the protocol outlined in advance by van Reeuwijk. 23 The pH was measured in a 1:2:5 clayey soil:water suspension. Soil texture was performed by using the feel method according to Meyer. 24
The oil absorption was determined following the American Society for Testing and Materials methods. 25 A 10 g sample of clay was put on a glass plate, and using a spatula, dropwise mineral oil was added to the clay from a previously weighed container. Upon observing a thin layer of oil by slithering the spatula over the top surface of the formed mass, the test was deemed successful. To determine the percentage of oil incorporated, the oil container weight was taken once more. The mineral oil used was a colourless, odourless and light mixture mainly composed of alkanes and cycloalkanes, related to petroleum jelly. It has a density of around 0.8–0.87 g/cm3. 26
Pharmacopoeia methods were used to perform the swelling capacity of the clay soil samples. 2 g of the clay soil sample was added in two different 100 mL graduated cylinders, the first cylinder containing distilled water, and the other 2 g was added into the cylinder containing aqueous solution of sodium lauryl ether sulphate (1%). These were stored at ambient temperature for 24 h. After 24 h, the apparent volume of the clay on the distilled water and sodium lauryl ether sulphate should not be lower than 22 and 24 mL, respectively. 27
The clay soil samples' plastic viscosity and apparent viscosity were performed using techniques outlined in Pharmacopoeias and were measured by the use of Fann Viscometer (Model 35A). This was achieved by mechanically stirring 400 mL of 5% aqueous dispersion sample at 14,000 rpm for 30 min. 28
The Fourier‐transform infrared spectroscopy (FTIR) characteristics were measured by PerkinElmer Frontier, with total reflectance attenuated in the spectral range of 400–4000 cm−1.
Metal analyses were measured by an X‐ray fluorescence (XRF) analyzer, a Vanta handheld C Series outfitted with a 50 keV Rh anode X‐ray tube as the excitation source and a silicon drift detector.
Scanning electron microscopy (SEM)—The samples were dispersed on carbon adhesive tape, sputter‐glazed with gold and viewed by a Phenom Pharos desktop SEM at 10 kV. Low and high‐magnification images ranging from 500 to 10,000x were captured to observe ultrastructural morphology.
X‐ray diffraction (XRD) analysis was performed by using the back‐loading preparation method from a PANalytical Empyrean Diffractometer. The XRD was coupled with an X'Celerator detector and Co‐Kα radiation; Generator settings at 40 kV (voltage) and 40 mA (current).
Sun protection factor (SPF) was evaluated by a Shimadzu Ultraviolet‐visible 1800 spectrophotometer, equipped with a 1 cm cuvette. 1 g of the soil sample was measured, then transferred into a 100 mL volumetric flask, filled to the brim with ethanol, vigorously mixed with the shaker for 10 min, and filtered through Whatman filter paper, discarding the first 10 mL. Subsequently, a 50 mL volumetric flask was filled with a 5 mL aliquot that had been diluted to volume using ethanol. After that, a 25 mL volumetric flask was filled to the top with ethanol using a 5 mL aliquot. By employing a 1 cm cuvette and ethanol as a blank, the spectral absorption of samples in solution was measured between 290 ‐320 nm. The Mansur equation was applied after three determinations were made at each point in the absorption data, the obtained measurements were taken at intervals of 5 nm within the range of 290–320 nm. 29 The following formula was used to determine the SPF of the clay samples and the control material: 30
In this case, the absorption of the diluted sample is represented by Abs, the solar intensity spectrum by I, the erythemal effect by EE, the wavelength by λ, and the correction factor. Every analysis was carried out in triplicates. The constant values of EE×I are displayed in Table 1.
TABLE 1.
The values of wavelengths and EE×I constants.
| Wavelength | EE×I |
|---|---|
| 290 nm | 0.0150 |
| 295 nm | 0.0817 |
| 300 nm | 0.2874 |
| 305 nm | 0.3278 |
| 310 nm | 0.1864 |
| 315 nm | 0.0837 |
| 320 nm | 0.0180 |
| Total | 1 |
Bulk density (BD) was performed by modifying a method reported by Cresswell and Hamilton. 31 This was achieved by weighing the weight of the measuring cylinder, the weight of the measuring cylinder plus clay soil and well as the clay soil volume as per details in Table 2. BD calculations are represented in Table 3.
TABLE 2.
Bulk density masses and volumes of soil sample.
| Measuring cylinder (g) | Measuring cylinder + soil sample (g) | Volume of the soil (mL) | Mass of the soil (g) | |
|---|---|---|---|---|
| White clay | 143.6713 | 172.3061 | 30 | 28.6348 |
| 143.6713 | 166.3791 | 25 | 22.7078 | |
| 143.6713 | 164.1445 | 20 | 20.4735 | |
| Red clay | 143.6883 | 174.1952 | 30 | 30.5069 |
| 143.6883 | 168.3911 | 25 | 24.7029 | |
| 143.6883 | 162.7491 | 20 | 19.0608 |
TABLE 3.
Calculation table for bulk density.
| White clay | Red clay | |
|---|---|---|
| BD (30 mL) |
= 28.63/30 = 0.95 g/cm3 |
= 30.15 g/30cm3 = 1.017 g/cm3 |
| BD (25 mL) |
= 22.71 g /25cm3 = 0.91 g/cm3 |
= 24.71 g/25cm3 = 0.9884 g/cm3 |
| BD (20 mL) |
= 20.47 g /20cm3 = 1.02 g/cm3 |
= 19.06 g/20cm3 = 0.9350 g/cm3 |
| Mean BD |
= 2.88/3 = 0.92 g/cm3 |
= 2.940/3 = 0.98 g/cm3 |
2.3. Antimicrobial activity
The clay samples were evaluated against microbial cultures of Gram‐positive, Gram‐negative and fungal species namely, Enterococcus faecalis (E. faecalis), Escherichia coli (E. coli), Klebsiella pneumoniae (ESBL positive), Candida Albicans (C. albicans), Pseudomonas aeruginosa (P. aeruginosa). We performed the analysis with multiple strains of microorganisms to evaluate broad‐spectrum antimicrobial activity. The antimicrobial activity was conducted using the disk diffusion Kirby‐Bauer susceptibility protocol. 32 Meuller Hinton agar was utilized to culture non‐fastidious bacteria and fungi due to its applicability in both research and clinical diagnostic testing. 32 The agar plates were brought to ambient temperature prior to seeding to prevent condensation. An inoculum which had an adjusted turbidity of 0.5 McFarland standard of the organisms to be evaluated, was applied to plates. We used a standardized suspension of the microbial strain to ensure consistent results. The suspension was used within 15 min after preparation. After incubation, the plates for any zones of inhibition around the clay samples. The disks with antibiotics and filter paper disks infused with red and white clay samples were positioned on the surface of the Meuller Hinton agar plate with forceps. The plates were then incubated at 35°C ± 2°C aerobically for a period of 16–18 h before reading. For both antibiotics and clay samples zones were read to establish whether they are susceptible, intermediate, or resistant based on the presence or absence of zones of inhibition. All samples were run in duplicates. The average antibiotic zones of inhibition results were then recorded and reported as susceptible, intermediate, or resistant.
3. RESULTS AND DISCUSSION
3.1. Physicochemical characteristics
3.1.1. of analyzed clay soils
The chemical and physical parameters of the clay soils are represented in Table 4. The pH of the analyzed clay samples was slightly acidic for both samples 4.79 (red clay) and 4.57 (white clay). Slightly acidic clays possess magical ingredient properties in skin care products, so they are perfect for cleansing skin by absorbing oil and smoothing the surface. Such clays are also gentle ingredients that can be used as exfoliants. 33 In accordance with the literature, 34 , 35 appropriate cosmetic products for skin cleansers must have pH the same as the skin's or close to neutral. Given that the healthy skin's pH varies from 4.5 to 5.5 clay samples in this study recorded acidic pH and they may be deemed appropriate for cleansing applications, as there is little chance of a chemical reaction happening when clay samples are applied to the skin. 36 Therefore, the skin remains unharmed when utilizing them as cleansers since highly alkaline cosmetic cleansers possess a significant propensity to prompt skin irritation. 37 They can also damage the stratum corneum's lipid bilayer, which can result in dryness and itching after skin wash. 38 Matike et al. reported that the pH values ranged from 4.5 to 9.5 after examining 40 clay samples that were used in South Africa for cosmetic purposes. 39 In their study, they further revealed that samples used for sunscreens had mean pH values around 6.31 and those used for body beautification had mean pH ranging from 7.4 to 9.5. 39
TABLE 4.
Physical and chemical characteristics.
| Parameters | Red clay | White clay | |
|---|---|---|---|
| pH | 4.79 | 4.57 | |
| Colour |
Hue/value/chroma 10R/7/8 |
Hue/value/chroma 2.5Y/8/1 |
|
| Soil texture | Sandy loam | Silty loam clay | |
| Oil absorption (%w/v) | 37.41 | 83.63 | |
| Plastic viscosity (cP) | 1.6 | 1.1 | |
| Apparent viscosity (cP) | 1.3 | 1.0 | |
| Swelling capacity | Sodium lauryl ether sulphate (%w/v) | 15 | 80 |
| Distilled water | 0.0 | 5.0 | |
| Bulk density | 0.98 g/cm3 | 0.92 g/cm3 | |
3.1.2. Colour of the analyzed clay soils
Soil colour is a straightforward yet helpful indicator during soil profiling and may contribute to the soil's sun‐screening capabilities. With the aid of the Munsell colour chart, the hue, value, and chroma of the soils' colours were determined. The hue describes the soil's colour shade on the electromagnetic spectrum (where R stands for red, Y for yellow, and YR for yellowish‐red). The purer the soil's colour, the higher the hue. The overall reflected light is indicated by the value of a soil colour, where 10 represents total reflection and 0 represents no reflection. The concentration of colour in soil is referred to as its chroma. Strong, vivid, and highly saturated colours are characterized as having a high chroma, whereas weak colours have a low chroma. In this study, red and white clays had a hue/value/chroma of 10YR/4/8 and 2.5Y/8/1, respectively (Table 4). Our red clay indicates that it may be suitable for sunscreen and skin lightening. Ngole et al. revealed that most of the sunscreens with a hue of 2.5‐10YR correspond to sunscreens and skin‐lightening cosmetic products. In the rural areas of the South African Pondo tribe, before a Pondo bride is taken to her husband's house, she is smeared from head to toe with red clay and kept in seclusion for seven days. The aim was to cleanse her skin and lighten it before she was taken to her husband's home. 40 Goethite, hematite and a rare illite presence in clayey soils may be suggested by this hue value. Our 2.5Y/8/1 white clay attributes correspond to skin cleansing, facemask and beauty purposes. Before the advent of modern medical practices, women in Pondoland (South Africa) gave birth in their homes with the assistance of elderly women within the village. At the birth of a baby, its whole body was smeared with white clay, even before the cutting of the umbilical cord. This was an effort to cleanse the skin and keep the baby warm. To ensure that the body was properly cleansed, white clay was only washed off after three days. 40 , 41
3.1.3. Oil absorption of clay soils
Oil absorption is the term used to describe the ratio of oil by weight required to form a firm yet easily spreadable paste from a given quantity of pigment, and the typical expression of this ratio is the amount of oil required per 100 grams of pigment, measured in grams. 41 The oil adsorption capacity of both soils was expressive, as this study recorded oil absorption values for red and white clay, 37.41% and 83.63%, respectively (Table 4); indicating that the substances had a greater affinity for oil and may contribute to a more matte or oil‐controlling effect, and the potential use of these samples in high adsorption capabilities applications such as ointments, powders and creams. 42 According to US Pharmacopoeia these values are considered expressive as it is reported that higher values (>20%). Red clay was comparable to a research study reported by Silva‐Valenzuela et al. where they reported oil absorption values of 33 and 46% for their pink and red soils. 43
3.1.4. Swelling capacity of clay soils
The swelling capacity is the amount of volume that changes when the moisture content of clay‐rich soils varies. This signifies the extent to which specific clay minerals will swell when wet and dry when dry. Shrink‐swell soil, also referred to as expansive soil, is problematic soil with a high capacity for shrinkage. 44 The US and British Pharmacopeia state that the swelling capacity in distilled water and sodium lauryl ether sulfate, the apparent volume should not be less than 22 and 24 mL, respectively.
Distinct performances were observed for red and white clay in the swelling capacity results (Table 4). Sediment volumes in sodium lauryl ether sulfate were 15 and 80 mL for red and white clay, respectively. Red clay content was below the maximum of 24 mL specified by the US Pharmacopoeia, whereas white was above the specified value. Red clay exhibited no swelling in water, which may symbolize that the clay is polycationic, a chemical complex having positive charges at several sites. However, white clay exhibited 5 mL in water, which is lower than the maximum value of 22 mL. These results were comparable to a study conducted by Silva‐Valenzuela et al. 42 , 45 The acceptable results indicate that these samples can help enhance the absorption of excess oil and protect skin from moisture, thereby providing comfort, protecting against rashes, and promote skin health, making it beneficial for oily and acne‐prone skin types.
3.1.5. Plastic and apparent viscosity
Plastic viscosity refers to the resistance of a fluid to flow in bores, resulting from the deformation of the liquid under shear pressure as well as mechanical friction between solids and liquids in the drilling fluids. Whereas apparent viscosity is determined by dividing the shear rate by the shear stress applied to a fluid. 46 The clay samples' measured plastic and apparent viscosities (Table 4) are below the minimum values recommended by US Pharmacopoeia. According to the Pharmacopoeia requirement, the accepted plastic and apparent viscosity should be higher than 4.0 and 15 cP, respectively. The study recorded plastic viscosities of 1.6 and 1.1 cP for red and white clays, respectively. Whereas the apparent viscosities for red and white clays were 1.3 and 1.0 cP, respectively. The low viscosities could be caused by the clay's potential polycationic nature, which may be connected to the samples' interlayer cation, as well as their poor ability to form quasicrystals in aqueous suspensions. 47 Furthermore, due to the various properties of each individual particle, such as their surface area, size distribution, aggregation, shape, and electrical charges on clay surfaces, comprehending the rheological performance of a blend of clay minerals that occur naturally may be more difficult. 48 , 49 It could be more challenging to deal with a blend of clay minerals that occur naturally.
3.1.6. Scanning electron microscopy
Surface morphology of clays is shown in Figures 1 and 2. In this study, the red and white clay adsorption surface has a porous structure with a heterogeneous texture. The microgram suggests that white clay has smaller particle sizes than red clay. At lower magnifications, both clays showed an irregular porous structure, whereas images at higher magnifications revealed that both clays had flaky‐shaped particles in SEM analysis with red clay being more porous. More or less similar findings were reported by Ramtekkar revealing that the smaller the particle sizes of white clay, radiant energy is better absorbed or dispersed. 14 , 50 This finding has been known to lessen the amount of ultraviolet (UV) radiation that reaches the skin. Red clay's porous structure may make it slightly irritating in high concentrations. 51
FIGURE 1.

A—White clay, A (low magnification); B—(high magnification).
FIGURE 2.

C—Red clay (low magnification); D—(high magnification).
3.1.7. Ultra‐visible and SPF measurements
The SPF values for red and white clay were found to be 18.621 and 6.231, respectively (Table 5). Since skin is the body's outermost layer, it must be shielded from radiation from the sun with fairly short wavelengths (UVB) rays that can cause the greatest amount of damage, including wrinkles, erythema, sunburns, and tanning (photoaging). 52 The market offers a large range of sunscreen products with various sunscreen ingredients; however, some sunscreens have a potentially harmful photo‐catalytic effect on the skin. 53 An SPF of above 15 is anticipated to protect the skin from damaging UVB radiation for 150–250 min which provides above 93% of protection. Whereas an SPF below 15 provides about 67% protection from UVB rays. 54 South Africa has an abundance of red soil, and this study reveals that it may have UVB‐blocking characteristics. As such, it was believed that these clays could be assessed for their ability to act as cosmetic products.
TABLE 5.
Calculated sun protection factor (SPF) values.
| Wavelength (nm) | White clay | Red clay | ||
|---|---|---|---|---|
| Absorbance (A) | EE | Absorbance (A) | EE | |
| Blank | – | – | – | – |
| 290 | 0.009 | 0.0150 | 0.011 | 0.0150 |
| 295 | 0.021 | 0.0817 | 0.016 | 0.0817 |
| 300 | 0.026 | 0.2874 | 0.008 | 0.2874 |
| 305 | 0.049 | 0.3278 | 0.013 | 0.3278 |
| 310 | 0.073 | 0.1864 | 0.015 | 0.1864 |
| 315 | 0.090 | 0.0837 | 0.009 | 0.0837 |
| 320 | 0.098 | 0.0180 | 0.010 | 0.0180 |
| SPF | 18.621 | 6.231 | ||
3.1.8. BD and texture
The dry BD, commonly known as soil BD, is determined by dividing the weight of dry soil by the overall volume of soil. The total volume of clay soil comprises both solid particles and voids that have the capacity to retain either air, water, or both. 55 BD may play an important part in determining the existence of moisture content, bulk minerals, and texture. The BD for red and white clays were 0.92 and 0.98 g/cm3. respectively. The obtained results are comparable to 0.99 and 0.98 g/cm3 of soils studies by Martin et al. 56 Texture of the red and white clays were found to be sandy loam and silty loam, respectively (Table 4).
3.1.9. Metal analysis
Table 6 lists the metals that were analyzed by XRF. Fortunately, red and white clay samples are free of the elements as toxic as Arsenic (As), Mercury (Hg), Cadmium (Cd) and Selenium (Se), except for Lead (Pb), which was detected below permissible levels (200 ppm) at 27 and 16 ppm, respectively. 57 Moreover, red and white clay samples contained 119 and 159 ppm levels of Titanium (Ti), 240 and 570 of Vanadium (V), 130 and 560 ppm of Chromium (Cr), 1730 and 153 ppm of iron (Fe), 340 60 and 29 ppm of Zinc (Zn), respectively. Manganese (Mn) and Nickel (Ni) were only detected in red clay, 850 and 340 ppm, respectively. There are no international guidelines or limits for Cr, Ni, Ti, V, Fe and Zn in cosmetic products, though, more than a few studies have shown that the presence of irritants, and/or following recurring exposures to Cr, subjects not often react to levels lower than 10 ppm. 58 , 59 , 60 , 61 For this reason, Basketter et al. 61 recommended that end‐user products should not contain more than 5 ppm of Cr. Both our red and white clay samples were above the suggested technically avoidable limits at 130 and 560 ppm, respectively. Cr in the +III and +VI oxidation states is a potential hapten in the development of contact allergy. 62 , 63 Prolonged exposure to Cr can cause skin ulcers, and severe redness and swelling of the skin. 64
TABLE 6.
X‐ray fluorescence (XRF) analysis results.
| Clay sample | Ti | V | Cr | Mn | Fe | Ni | Zn | Y | Zr | Pb |
|---|---|---|---|---|---|---|---|---|---|---|
| Red (ppm) | 119 | 240 | 130 | 850 | 1730 | 340 | 60 | 24 | 136 | 27 |
| White (ppm) | 159 | 570 | 560 | – | 153 | – | 29 | 6 | 156 | 16 |
The detection of Fe, Zn, and Ti showed that our clay samples can be used as a suitable ingredient in the world of cosmetics. Moreover, red clay had a higher content of Fe than any other metal and consequently, higher potential for UVB protection as higher Fe content has been shown to significantly enhance the UV protection value of clays by reducing UVB‐transmission levels. 65
A study by Ajayi et al. reported high concentrations of Fe in graphite‐based clay samples (> 4300 ppm). 66 Elsewhere, Thuadaji et al. recorded that Fe may have antibacterial and cell‐effecting properties while Zn gives a refreshing skin sensation and titanium can reflect harmful UV radiation. 67 However, long‐term exposure to small amounts of Fe from cosmetic products may cause cellular death or colorectal cancer as a result of cumulative effects. 68 , 69 Basketter et al. recommended that Ni, Ti, Zn and V concentrations of about 250 ppm are sufficient to cause contact dermatitis in already irritated skin. Although Mn is a rare skin sensitizer, there are reported cases of increased menstrual blood loss and pain as a result of repeated exposure. 61 , 70
The radioactive elements thorium (Th) and uranium (U) were absent from both samples at detectable levels because prolonged exposure to these substances at high radiation levels can result in acute health consequences like skin burns and acute radiation syndrome. Zirconium (Zr) 136 and 156 ppm; and yttrium (Y), 24 and 6 ppm for red and white clays, respectively; are present in substantial amounts, below the permissible limit of 200 ppm. 71 This indicates that these two radioactive elements detected will not present a substantial threat to human health.
3.1.10. XRD analysis
The X‐ray diffraction patterns shown in Figures 3 and 4 demonstrate that the materials are mixtures of different minerals. Mineral compositions consequential from XRD data are shown in Table 7. According to the main mineral phases present, red clay is composed of major Illite (56.7%) components with admixtures of Quartz (31.3%), albite (9.9%) and minor amounts of Vermiculite (2.0%). The white clay was found to contain Illite (34.5%), Albite (33.8%), and Montmorillonite (31.7%). A significant finding is red clay sample contained considerable amounts of Quartz (31.3%). According to Khiari et al, a Quartz content above 15% is cause for concern, even for topical applications, as there is sufficient evidence of quartz carcinogenicity. 72 Also, the red clay sample showed the highest Fe content, even though it seemingly comprises no goethite. At first, this appears to be a contradiction. However, Fe‐rich Illites containing even higher amounts of Fe have been reported. 73 , 74 , 75 Illite possesses good absorbent properties and has a stronger ability to calm skin irritated by influencing factors in the skin that can lead to health issues. Red, white and yellow Illite clays are very efficient at drawing, dirt, oils, and toxins from the skin. Most suitably used on oily skin types, Illite Clays make excellent cleansers, masks, and detoxification treatments. 76 White clay contained somewhat amounts of Montmorillonites. Montmorillonites are excellent at instantly sucking up waxy and sticky substances from the skin and they might even be helpful in treating some rashes or skin irritations. Such clays are known not to expand in water, making them ideal additives for soaps, scrubs, and liquid formulas. 76
FIGURE 3.

X‐ray diffraction (XRD) diffractograms for white clay.
FIGURE 4.

X‐ray diffraction (XRD) diffractograms for red clay.
TABLE 7.
X‐ray diffraction (XRD) mineral composition of clays.
| Sample ID | Montmorillonite (%) | Illite (%) | Quartz (%) | Albite (%) | Vermiculite (%) |
|---|---|---|---|---|---|
| Red clay | 0 | 56.7 | 31.3 | 9.9 | 2.0 |
| White clay | 31.7 | 34.5 | 0 | 33.8 | 0 |
3.1.11. FTIR analysis
The FTIR results are shown in Figure 5. According to the results, the spectrum of red and white clay shows the characteristic peaks assigned to O‐H stretching and bending vibration at around 3700 cm−1. The asymmetric stretching of O‐H occurs approximately at 3700 cm−1. This could probably be owing to the presence of the internal and surface OH groups in the octahedral sheets. The bands at around 2500 cm−1 were attributed to C‐H vibrations. The C—O stretching was observed at around 2000 cm−1 and those of C‐C were seen around 1000 cm−1 for both samples. The study results were comparable to a study conducted by Arianpour, 2022 on the characterization, technological properties and ceramic applications of clays in Turkey. 77
FIGURE 5.

Fourier‐transform infrared spectroscopy (FTIR) spectrum.
3.2. Biological characteristics
The results of the antimicrobial analysis of red and white clays versus various microbial species are presented in Table 8. The results indicate that the clays did not exhibit any antimicrobial activities. The tested strains included Gram‐positive, Gram‐negative and fungal species, which were chosen to assess the broad‐spectrum antimicrobial activities of the clays. The disk diffusion Kirby‐Bauer susceptibility protocol was used to assess the antimicrobial activity. The results showed that the clays were resistant to all tested microbial strains. These findings align with prior research that evaluated the effectiveness of clay soils from the Paraiba State against three bacterial strains for pharmaceutical, aesthetic, and therapeutic treatments. The study's findings demonstrated that the clays were ineffective against bacteria. 78 However, scientific evidence suggests that these clays may protect the dermal layers against ultraviolet light damage, which can prevent cosmetic or dermatological problems. 79
TABLE 8.
Antimicrobial activity of the red and white clays against the various clinical isolates.
| Organism | Gram reaction | Clays | Control antibiotics | ||
|---|---|---|---|---|---|
|
Klebsiella pneumonia (ATCC7 00603) |
Negative bacilli | Red | Resistant | Ciprofloxacin | Sensitive |
| White | Resistant | ||||
|
Escherichia coli (ATCC 25922) |
Negative bacilli | Red | Resistant | Clindamycin | Sensitive |
| White | Resistant | ||||
|
Pseudomonas aeruginosa (ATCC 27853) |
Negative bacilli | Red | Resistant | Amikacin | Sensitive |
| White | Resistant | ||||
|
Enterococcus faecalis (ATCC 29412) |
Positive cocci, chains | Red | Resistant | Vancomycin | Sensitive |
| White | Resistant | ||||
|
Candida Albicans (ATCC 14052) |
Yeast | Red | Resistant | Fluconazole | Sensitive |
| White | Resistant | ||||
The lack of antimicrobial activity of the red and white clays analysed in this study could be due to the absence of active ingredients or insufficient concentration of active ingredients. The clays may have other properties that make them useful in protecting against ultraviolet light damage to the skin. Further research is needed in future studies could explore the potential mechanisms by which the clays protect the dermal layers against ultraviolet light damage. There have been several other studies that have investigated the antimicrobial properties of clay minerals. One study conducted by Williams et al. evaluated the antimicrobial activity of three different types of clay minerals against a panel of bacteria and fungi, including E. coli and Candida albicans. 80 The study revealed that none of the clay minerals showed any significant antimicrobial activity. Another study conducted by Lansdown reviewed the antimicrobial properties of clay minerals and their potential use in wound healing. 81 The study concluded that while some clay minerals do exhibit antimicrobial properties, more research is needed to determine their effectiveness in clinical settings. Similarly, a study by Pelletier et al. evaluated the antibacterial activity of kaolin clay against numerous bacterial strains, such as E. coli and S. aureus. 82 The study found that while kaolin clay did exhibit some antimicrobial activity, it was not as effective as traditional antibiotics. In general, the outcomes of these investigations align with the findings of the current study, suggesting that clay minerals may not be effective as broad‐spectrum antimicrobial agents. However, for a complete understanding of the potential uses of clay minerals in skin care and wound healing, more research needs to be done.
4. CONCLUSION
We describe the characterization of chemical, physical and biological properties of red and white clay samples from Durban, South Africa. The samples have pleasing qualities that could make them appropriate for cosmetic applications, according to the characterization results, such as pH, colour and oil absorption, metals and texture. However, future research should look into whether the potentially toxic elements exhibit strong mineral structure binding or are easily exchangeable.
Replacing synthetic UVB protection agents with natural materials is an ongoing goal. Clays and clay minerals, which are already used in many different kinds of therapeutic, beautifying and cosmetic products because of their numerous health benefits, are potential compounds to use as natural UV‐protecting agents in sunscreens. Potential avenues for future research include examining the stability parameters of natural clays and how they can be incorporated into appropriate products. It is recommended to perform patch testing on human volunteers and to determine SPF.
Although, some metals can build up in the human body over time and cause adverse health effects. In the present circumstance, there is a need to develop guidelines and standards for metals in cosmetics and to establish immediate mandatory regular testing programs to check the contents of metals in South African local facial clays in order to restrict their excesses and protect the consumer's health.
The study provides valuable information on the antimicrobial activity of clay samples against various microbial strains. The findings indicate that these clays do not exhibit antimicrobial activity against the tested strains. Manufacturers of skin care products and healthcare professionals can use this information to make informed decisions regarding the use of clays in treating or preventing microbial infections. The study also highlights the need for further research to explore the potential mechanisms by which clays protect the dermal layers against ultraviolet light damage. This information can be used to develop more effective skincare products that protect the skin against both microbial infections and ultraviolet light damage. The study contributes to the existing knowledge on the properties and potential uses of clays in skincare and healthcare.
CONFLICT OF INTEREST STATEMENT
The authors declare no conflict of interest.
ACKNOWLEDGEMENTS
The financial support for this study was provided by the Technology Innovation Agency through its core grant to the Technology Station in Chemicals of Mangosuthu University of Technology, without specifying the core grant number.
Nkosi SM, Thembane N. Physical, chemical and biological characteristics of clays from Durban (South Africa) for applications in cosmetics. Anal Sci Adv. 2024;5:2300062. 10.1002/ansa.202300062
DATA AVAILABILITY STATEMENT
Data are openly available in a public repository that issues datasets with DOIs.
REFERENCES
- 1. Murray HH. Applied Clay Mineralogy: Occurrences, Processing, and Applications of Kaolins, Bentonites, Palygorskitesepiolite and Common Clays. 1st ed. Elsevier; 2007. [Google Scholar]
- 2. Madejová J, Pálkova H, Kodamel P. IR spectroscopy of clay minerals and clay nanocomposites. Spectrosc Prop Inorg Organomet Compd. 2010;41:22‐71. https://doi.org.1039/9781849730853‐00022 [Google Scholar]
- 3. Stucki JW. Properties and behaviour of ion in clay minerals. in: Bergaya F, Theng BKG, Lagaly G, eds. Handbook of Clay Science. 1st ed. Elsevier Science; 2006:423‐475. [Google Scholar]
- 4. Srinivasan R. Advances in application of natural clay and its composites in removal of biological, organic, and inorganic contaminants from drinking water. Adv Mater Sci Eng. 2011;2011:872531. https://doi.org.1155/2011/872531 [Google Scholar]
- 5. López‐Galindo CV. Pharmaceutical and cosmetic applications of clays. Interface Sci Technol. 2004:267‐289. [Google Scholar]
- 6. Viseras C, Aguzzi C, Cerezo P, Lopez‐Galindo A. Uses of clay minerals in semisolid health care and therapeutic products. Appl Clay Sci. 2007;36:37‐50. https://doi.org.1016/j.clay.2006.07.006 [Google Scholar]
- 7. López‐Galindo A, Viseras C, Cerezo P. Compositional, technical and safety specifications of clays to be used as pharmaceutical and cosmetic products. Appl Clay Sci. 2007;36:51‐63. https://doi.org.1016/j.clay.2006.06.016 [Google Scholar]
- 8. Carretero MI, Pozo M, Legido JL, et al. Assessment of three Spanish clays for their use in pelotherapy. Appl Clay Sci. 2014;99:131‐143. https://doi.org.1016/j.clay.2014.06.022 [Google Scholar]
- 9. Khiari I, Mefteh S, Sánchez‐Espejo R, et al. Study of traditional Tunisian medina clays used in therapeutic and cosmetic mudpacks. Appl Clay Sci. 2014;101:141‐148. https://doi.org.1016/j.clay.2014.07.029 [Google Scholar]
- 10. Carrado KA, Decarreau A, Petit S, Bergaya F, Lagaly G. Synthetic clay minerals and purification of natural clays. in: Bergaya F, Theng BKG, Lagaly G, eds. Handbook of Clay. Elsevier Science; 2006:115‐139. [Google Scholar]
- 11. Carretero MI, Gomes CSF, Tateo F. Clays and human health. in: Bergaya F, Theng BKG, Lagaly G, eds. Developments in Clay Science. Elsevier; 2006:717‐741. [Google Scholar]
- 12. Gomes C, Carretero MI, Pozo M, et al. Peloids and pelotherapy. Historical evolution, classification, and glossary. Appl Clay Sci. 2013;75:28‐38. https://doi.org.1016/j.clay.2013.02.008 [Google Scholar]
- 13. Karakaya MC, Karakaya N, Sarıoğlan Ş, Koral M. Some properties of thermal muds of some spas in Turkey. Appl Clay Sci. 2010;48:531‐537. https://doi.org.1016/j.clay.2010.02.005 [Google Scholar]
- 14. Ramtekkar D, Bajpai N. Extraction of clay from red soil and evaluation of its UV protection. Properties. Int J Sci Res. 2018;7:426. [Google Scholar]
- 15. Vozza S. The benefits of mud and clay in the treatment room. The whole health resource for wellness spa professionals report. 2018.
- 16. Morganti P, Agostini G, Fabrizi G. The cosmetic use of an ancient peat of thermal origin. J Appl Cosmetol. 2001;19:21‐30. [Google Scholar]
- 17. Pozo M, Carretero MI, Maraver F, et al. Composition, and physico‐chemical properties of peloids used in Spanish spas: a comparative study. Appl Clay Sci. 2013;83‐84:270‐279. https://doi.org.1016/j.clay.2013.08.034 [Google Scholar]
- 18. Veniale F, Barberis E, Carcangiu G, et al. Formulation of muds for pelotherapy: effects of “maturation” by different mineral waters. Appl Clay Sci. 2004;25:135‐148. https://doi.org.1016/j.clay.2003.10.002 [Google Scholar]
- 19. Quintela A, Terroso D, Da Silva EF, Rocha F. Certification and quality criteria of peloids used for therapeutic purposes. Clay Miner. 2012;47(4):441‐451. https://doi.org.1180/claymin.2012.047.4.04 [Google Scholar]
- 20. Sarruf FD, Contreras VJP, Martinez RM, Velasco MVR, Baby AR. The scenario of clays and clay minerals use in cosmetics/dermocosmetics. Cosmetics. 2024;11(1):7‐29. https://doi.org.3390/cosmetics11010007 [Google Scholar]
- 21. Ekosse GE, Mulaba A, Nkoma JS. Physico‐chemistry of continental bentonites and kaolin for ceramic applications. Afr J Sci Technol. 2007;8(1):107‐115. [Google Scholar]
- 22. Sarbatly R, Yee CP, Fong TS, Krishnaiah D. Particle size distribution and purification of red clay for industrial use. J Appl Sci. 2009:2344‐2347. https://doi.org.3923/jas.2009.2344.2347 [Google Scholar]
- 23. Van Reeuwijk LP. Procedures for Soil Analysis. International Soil Reference and Information Centre; 2002. [Google Scholar]
- 24. Meyer JH. Rapid simultaneous rating of soil texture, organic matter, total nitrogen and nitrogen mineralization potential by near infra‐red reflectance. S Afr J Plant and Soil. 2020;6:1. Accessed February 15, 2024. https://hdl.handle.net/10520/AJA02571862_178 [Google Scholar]
- 25.ASTM. Standard Test Method for Oil Absorption of Pigments by Spatula Rub‐out. 2021. ASTM D281‐12. Accessed Jun 15, 2021 http://www.astm.org/d0281‐12r21.html
- 26. National Physical Laboratory . Mechanical properties of materials". Kaye and Laby tables of physical and chemical constants. Archived from the original on 11 March 2008. Accessed March 6, 2008.
- 27. USP . Supplement (United States Pharmacopeia/National Formulary) Hardcover USP NF 2021.
- 28. British Pharmacopoeia . The Stationery Office, London, Vol. I. 2009.
- 29. Zayd H, Alsaeh IA, Mosa FA, Ben‐Hander GM. In‐vitro evaluation of sun protection factors of sunscreens marketed in Sirte by ultraviolet spectrophotometry. J Pure Appl Sci. 2019;18(4). https://doi.org.51984/jopas.v18i4.522 [Google Scholar]
- 30. Dutra AE, Daniella AG, Erika RM, Kedor H, Maria IR, Miritello S. Determination of sun protection factor (SPF) of sunscreens by ultraviolet spectrophotometry. Brazilian J Pharm Sci. 2004;40:240‐251. [Google Scholar]
- 31. Cresswell HP, Hamilton GJ. Bulk density and pore space relations. in: McKenzie N, Cresswell HP, Hamilton GJ, eds. Soil Physical Measurement and Interpretation for Land Evaluation. CSIRO; 2002:35‐58. https://doi.org.1016/j.coal.2015.08.007 [Google Scholar]
- 32. Gamoudi S, Srasra E. Characterization of Tunisian clay suitable for pharmaceutical and cosmetic applications. Appl Clay Sci. 2017;146:162‐166. https://doi.org.1016/j.clay.2017.05.036 [Google Scholar]
- 33. Hudzicki J. Kirby‐Bauer Disk Diffusion Susceptibility Test Protocol. American Society for Microbiology; 2009. [Google Scholar]
- 34. Baranda L, González‐Amaro R, Torres‐Alvarez B, Alvarez C, Ramírez V. Irritant effect of cleansers. Correlation between pH and irritant effect of cleansers marketed for dry skin. Int J Dermatol. 2002;41:494‐499. https://doi.org.1046/j.1365‐4362.2002.01555.x [DOI] [PubMed] [Google Scholar]
- 35. Nash F, Matta P, Ertel K. Maintenance of healthy skin: cleansing, moisturization and ultraviolet protection. J Cosmet Dermatol. 2007;6:7‐11. https://doi.org.1111/j.1473‐2165.2007.00314.x [Google Scholar]
- 36. Chan DCW, Wong HCY, Riad MA. Prevention of radiation dermatitis with skin hygiene and washing: a systematic review and meta‐analysis. Support Care Cancer. 2023;31:294‐309. https://doi.org.1007/s00520‐023‐07720‐8 [DOI] [PubMed] [Google Scholar]
- 37. Raszewska‐Famielec M, Flieger J. Nanoparticles for topical application in the treatment of skin dysfunctions – an overview of dermo‐cosmetic and dermatological products. Int J Mol Sci. 2022;23(24):15980‐16024. https://doi.org.3390/ijms232415980 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 38. Ananthapadmanabhan KP, Moore DJ, Subramanyan K, Misra M, Meyer F. Cleansing without compromise: the impact of cleansers on the skin barrier and the technology of mild cleansing. Dermatol Ther. 2004;17:16‐25. [DOI] [PubMed] [Google Scholar]
- 39. Matike DME, Ekosse GIE, Ngole VM. Physico‐chemical properties of clayey soils used traditionally for cosmetics in Eastern Cape, South Africa. Int J Phys Sci. 2011;6(33):7557‐7566. https://doi.org.5897/IJPS11.1249 [Google Scholar]
- 40. Ngole VM, Ekosse GE, De Jager L, Songca SP. Physicochemical characteristics of geophagic clayey soils from South Africa and Swaziland. Afr J Biotech. 2010;9(36):5929‐5937. [Google Scholar]
- 41. Carretero MI, February PozoM. Clay and non‐clay minerals in the pharmaceutical and cosmetic industries Part II. Active ingredients. Appl Clay Sci. 2010;47:171‐181. https://doi.org.1016/j.clay.2009.10.016 [Google Scholar]
- 42. Luo L, Hu J‐q, Na LV. Preparation, and oil absorption properties of magnetic melamine sponge IOP conference series. Earth Environ Sci. 2017;100:12068‐12071. https://doi.org.1088/1755‐1315/100/1/012068 [Google Scholar]
- 43. Silva‐Valenzuela M, Chambi‐Peralta MM, Sayeg IJ, de Souza Carvalho FM, Wang SH, Valenzuela‐Díaz FR. Enrichment of clay from Vitoria da Conquista (Brazil) for applications in cosmetics. Appl Clay Sci. 2018;155:111‐119. https://doi.org.1016/j.clay.2018.01.011 [Google Scholar]
- 44. Abbey SJ, Eyo EU, Ng'ambi S. Swell, and microstructural characteristics of high‐plasticity clay blended with cement. Bull Eng Geol Environ. 2020;79:2119‐2130. https://doi.org.1007/s10064‐019‐01621‐z [Google Scholar]
- 45. Zhang Z, You L, Lin J, et al. Impact of soil surface properties on soil swelling of different soil layers in collapsing wall of Benggang. PLoS One. 2023;18(2):115‐127. https://doi.org.1371/journal.pone.0280729 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 46. Laird DA. Influence of layer charge on swelling of smectites. Appl Clay Sci. 2006;34(1‐4):74‐87. https://doi.org.1016/j.clay.2006.01.009 [Google Scholar]
- 47. Schramm LL, Kwak JCT. Influence of exchangeable cation composition on the size and shape of montmorillonite particles in dilute suspension. Clays Clay Miner. 1982:30(1):40‐48. https://doi.org.1346/CCMN.1982.0300105 [Google Scholar]
- 48. Kumari N, Mohan C. Basics of clay minerals and their characteristic properties. Clays Clay Miner. 2021;7:209‐218. https://doi.org.5772/intechopen.97672 [Google Scholar]
- 49. Christidis GE, Blum AE, Eberl DD. Influence of layer charge and charge distribution of smectites on the flow behavior and swelling of bentonites. Appl Clay Sci. 2006;34(1‐4):125‐138. https://doi.org.1016/j.clay.2006.05.008 [Google Scholar]
- 50. Pissavini M, Ferrero L, Alaro V, et al. Determination of the in vitro SPF. Cosmet Toiletries. 2003;118:63‐72. [Google Scholar]
- 51. Hoang‐Minh TLL, Kasbohm J, Gieré R. UV protection characteristics of some clays. Clay Sci. 2010;48:349‐357. https://doi.org.1016/j.clay.2010.01.005 [Google Scholar]
- 52. D'Orazio J, Jarrett S, Amaro‐Ortiz A, Scott T. UV radiation and the skin. Int J Mol Sci. 2013;14(6):12222‐12248. https://doi.org.3390/ijms140612222 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 53. De Fabo EC, Noonan FP, Frederick JE. Biologically effective doses of sunlight for immune suppression at various latitudes and their relationship to changes in stratospheric ozone‖. Photochem Photobiol Sci. 1990;52:811‐817. https://doi.org.1111/j.1751‐1097.1990.tb08686.x [DOI] [PubMed] [Google Scholar]
- 54. Draelos ZD. The multifunctional value of sunscreen containing cosmetics. Skin Therapy Lett. 2011;16(7):1‐3. [PubMed] [Google Scholar]
- 55. Tranter G, Minasny B, Mcbratney AB, Murphy B, Mckenzie NJ, Grundy MD, Brough Building and testing conceptual and empirical models for predicting soil bulk density. Soil Use Manag. 2007;23:437‐443. https://doi.org.1111/j.1475‐2743.2007.00092.x [Google Scholar]
- 56. Martín MÁ, Reyes M, Taguas FJ. Estimating soil bulk density with information metrics of soil texture. Geoderma. 2017;287:66‐70. https://doi.org.1016/j.geoderma.2016.09.008 [Google Scholar]
- 57. Schupp T, Damm G, Foth H, et al. Long‐term simulation of lead concentrations in agricultural soils in relation to human adverse health effects. Arch Toxicol. 2020;94(7):2319‐2329. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 58. Torres F, das Graças M, Melo M, Tosti A. Management of contact dermatitis due to nickel allergy: an update. Clin Cosmet Investig Dermatol. 2009;17:39‐48. https://doi.org.2147/ccid.s3693 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 59. Uter W Werfel T, Lepoittevin JP, White IR. Contact Allergy‐Emerging allergens and public health impact. Int J Environ Res Public Health. 2020;17:2404‐2410. https://doi.org.3390/ijerph17072404 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 60. Shetty VD, Villar RN. Development and problems of metal‐on‐metal hip arthroplasty. Proceedings of the Institution of Mechanical Engineers. J Eng Med. 2006;220(2):371‐377. https://doi.org.1243/095441105x63264 [DOI] [PubMed] [Google Scholar]
- 61. Basketter DA, Angelini G, Ingbe RA, Kern PS, Merine T. Nickel, cadmium and cobalt in consumer products: revisiting safe levels in new millennium. Contact Dermatitis. 2003;49:1‐7. https://doi.org.1111/j.0105‐1873.2003.00149.x [DOI] [PubMed] [Google Scholar]
- 62. Iyer VJ, Banerjee G, Govindram CB, Kamath V, Shinde S, et al. Role of different valence states of chromium in the elicitation of allergic contact dermatitis. Contact Dermatitis. 2002;47:357‐360. https://doi.org.1111/j.0105‐1873.2003.00149.x [DOI] [PubMed] [Google Scholar]
- 63. Thyssen JP, Johansen JD, Menné T. Contact allergy epidemics and their controls. Contact Dermatitis. 2007;56:185‐195. https://doi.org.1111/j.1600‐0536.2006.01058.x [DOI] [PubMed] [Google Scholar]
- 64. Santos FCF, Verweij RA, van Gestel CAM, Amorim MJB. Toxicokinetics of chromium in Enchytraeus crypticus (Oligochaeta). Toxics. 2022;10(2):82‐100. https://doi.org.3390/toxics10020082 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 65. Hoang‐Minth T, LL Thi, Joern KR, Gieré RG. Substituting non‐natural agents in UV‐protection cream by a mixture of clay with Ganoderma Pfeiffer extract. Appl Clay Sci. 2011;53(1):66‐72. https://doi.org.1016/J.Clay.2011.04.024 [Google Scholar]
- 66. Iwegbue CMA, Bassey FI, Obi G, Tesi GO, Martincigh BS. Concentrations and exposure risks of some metals in facial cosmetics in Nigeria. Toxicol Rep. 2016;23(3):464‐472. https://doi.org.1016/j.toxrep.2016.04.004 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 67. Thuadaji P, Duangkham S, Hobanthad T. Characterization of Buriram volcanic clay for use in cosmetics. Mater Res Express. 2020;7:95104‐95110. https://doi.org.1088/2053‐1591/abb6b5 [Google Scholar]
- 68. Miyajima H, Kono S, Takahashi Y, Sugimoto M. Increased lipid peroxidation and mitochondrial dysfunction in aceruloplasminemia brains. Blood Cells Mol Dis. 2002;29(3):433‐438. https://doi.org.1006/bcmd.2002.0561 [DOI] [PubMed] [Google Scholar]
- 69. Senesse P, Meance S, Cottet V, Faivre J, Boutron‐Ruault MC. High dietary iron and copper and the risk of colorectal cancer: a case‐control study in Burgundy, France. Nutr Cancer. 2004;49(1):66‐71. https://doi.org.1207/s15327914nc49019 [DOI] [PubMed] [Google Scholar]
- 70. Dong MH. An Introduction to Environmental Toxicology. 3rd ed. Create Space Publishing Platform; 2014. [Google Scholar]
- 71. Gaschnig RM, Horan MF, Rudnick RL, Vervoort JD, Fisher CM. History of crustal growth in Africa and the Americas from detrital zircon and Nd isotopes in glacial diamictites. Precambrian Res. 2022;373:106641‐106652. https://doi.org.1016/j.precamres.2022.106641 [Google Scholar]
- 72. Khiari I, Mefteh S, Sánchez‐Espejo R, et al. Study of traditional Tunisian medina clays used in therapeutic and cosmetic mud‐packs. Appl Clay Sci. 2014;101:141‐148. https://doi.org.1016/j.clay.2014.07.029 [Google Scholar]
- 73. Brigatti MF. Relationships between composition and structure in Fe‐rich smectites. Clays Clay Miner. 1983;18(2):177‐186. https://doi.org.1180/claymin.1983.018.2.06 [Google Scholar]
- 74. Rudmin M, López‐Quirós A, Banerjee S, et al. Origin of Fe‐rich clay minerals in Early Devonian volcanic rocks of the Northern Minusa basin. Eastern Siberia Appl Clay Sci. 2023;241:107014‐107201. https://doi.org.1016/j.clay.2023.107014 [Google Scholar]
- 75. Brindley GW, Brown G. Crystal Structures of Clay Minerals and their X‐ray Identification. 3rd ed. Mineralogical Society; 1980. [Google Scholar]
- 76. Mattioli M, Giardini L, Roselli C, Desideri D. Mineralogical characterization of commercial clays used in cosmetics and possible risk for health. Appl Clay Sci. 2016;119(2):449‐454. https://doi.org.1016/j.clay.2015.10.023 [Google Scholar]
- 77. Arianpour AC, Arianpour F. Characterization, technological properties, and ceramic applications of Kastamonu alluvial clays (Northern Turkey) in building materials. Constr Build Mater. 2022;356:129304‐129320. https://doi.org.1016/j.conbuildmat.2022.129304 [Google Scholar]
- 78. Buriti BM, Buriti JS, Silva IA, Cartaxo JM, Neves GA, Ferreira HC. Characterization of clays from the State of Paraiba, Brazil for aesthetic and medicinal use. Cerâmic. 2019;65:78‐84. https://doi.org.1590/0366‐69132019653732534 [Google Scholar]
- 79. Viseras C, Carazo E, Borrego‐Sánchez A, et al. Clay minerals in skin drug delivery. Clays Clay Miner. 2019;67:59‐71. https://doi.org.1007/s42860‐018‐0003‐7 [Google Scholar]
- 80. Williams LB, Haydel SE, Giese RF. Efficacy of selected natural products against Gram‐positive bacteria. J Med Food. 2008;11(4):741‐746. https://doi.org.1346/2FCCMN.2008.0560405 19053868 [Google Scholar]
- 81. Lansdown AB. Silver in health care: antimicrobial effects and safety in use. Curr Probl Dermatol. 2006;33:17‐34. https://doi.org.1159/000093928 [DOI] [PubMed] [Google Scholar]
- 82. Pelletier JH, Alabdullatif JA, Mattson EC, Hudson LG. Antibacterial activity of kaolin, halloysite, and copper‐doped halloysite against Pseudomonas aeruginosa and Staphylococcus aureus . ACS Omega. 2018;3(3):2839‐2846. [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Data Availability Statement
Data are openly available in a public repository that issues datasets with DOIs.
