Table 11.
Insert specifications | ||
---|---|---|
Insert manufacturer | Sandvik Coromant | Sandvik Coromant |
Reference | DCMX 11 T3 04-WF 4325 | DCMX 11 T3 08-WF 4425 |
Tip radius (mm) | 0.4 | 0.8 |
Main cutting edge angle (°) | 93 | 93 |
Recommended depth of cut (mm) | 0.3–3.0 | 0.3–3.0 |
Recommended cutting speed (m/min) | 345–475 | 305–420 |
Recommended feed rate (mm/rev) | 0.07–0.30 | 0.12–0.40 |