Table 1.

Acquisition parameters for the different case studies. Columns represent: acquisition rate of tomograms per second, no. of projections in each tomogram, exposure time for each radiogram, acquisition rate of radiograms in kilo‐frames per second (kfps), field of view, number of tomograms in entire experiment, data set size of the raw projection series, size of total data set after reconstruction of all time steps, and radial acceleration in g‐units at the outmost point of sample

Experiment a)	Tps [s−1]	No. projections	Exposure [ms]	kfps	FoV [pixel]	No. of tomos	Raw file size [GB]	Rec. file size [GB]	Acceleration [g]
AlBi10	50	200	0.09	10	1008 × 400	3600	541	2725	2.5
AlGe10	200	100	0.045	20	528 × 280	11 801	331	1716	20.1
Sparkler	400	100	0.02	40	528 × 128	9501	121	1381	129
AlSi6Cu4 foam	650	62	0.02	40	480 × 128	44 354	315	2436	212
AlSi8Mg4 foam	1000	40	0.02	40	528 × 120	43 899	208	2735	503

^a) All experiments done with filtered white beam, 5 mm of glassy carbon, 325 µm‐thick Si filter, and 2.75 µm pixel size.