Skip to main content
. Author manuscript; available in PMC: 2024 Oct 19.
Published in final edited form as: Med Phys. 2024 Jun 6;51(9):6475–6484. doi: 10.1002/mp.17192

Figure 1.

Figure 1.

(top) A 3D rendering of the custom 3D-printed detector holder used in the intercomparison experiment with 4 detector channels spaced 15 mm apart and threaded holes for thumb-tightened nylon set screws. (bottom) The 4 detectors were placed in the holder, which was then placed in the water tank’s chamber holder block for subsequent calibration and dosimetry measurements.