Skip to main content
. 2024 Sep 26;10(10):620. doi: 10.3390/gels10100620

Figure 6.

Figure 6

SEM micrographs of 3D printed gummies with and without MET at different magnifications. (A) 3D printed gummy surface with MET 37× (500 µm); (B) 3D printed gummy surface with MET 200× (100 µm); (C) 3D printed gummy middle layer with MET 37× (500 µm); (D) 3D printed gummy middle layer with MET 200× (100 µm); (E) 3D printed gummy surface without MET 37× (500 µm); (F) 3D printed gummy surface without MET 200× (100 µm); (G) 3D printed gummy middle layer without MET 37× (500 µm); (H) 3D printed gummy middle layer without MET 200× (100 µm).