Table 1.

1—Chemical composition of the raw biomass used in this study (results were taken from Girard et al. work [44]). 2—Main data for lignin isolation from 10 L organosolv process. Extraction repetitions were performed from same dry biomass with equivalent granulometry. The initial particle diameter was 8 mm, and no acid catalysis was used. Cellulose, hemicellulose, and lignin contents were based on the solid residue analysis. Lignin macroparticles (LMPs) extraction yields (wtc %) are based on raw lignin biomass content. Each value is the mean of three repetitions.

1. Raw Material (%)	Cellulose	Hemicellulose	Lignin	Extractives	Ashes	Total
	47.8 ± 1.5	22.5 ± 0.9	23.7 ± 0.2	2.7 ± 0.3	0.7 ± 0	97.4 ± 2.9
2. Organosolv solid residue (%)	Cellulose	Hemicellulose	Lignin	Mass loss yield (wt %)	LMPs purity (%)	LMPs isolation yields (wtc %)
	51.5 ± 1.8	13.0 ± 0.7	13.0 ± 0.4	46.0 ± 0.1	93.8 ± 0.3	70.8 ± 0.2