●	Strain rates	- values of strain rates resulting from the used loading modes;
●	∆R and ∆Z	- the change in radius of curvature and maximal dZ position (thus, height of dome) gave a first basic overview of the deformation behaviour of tested materials;
●	Stress-strain curves	- the main monitored results were determined under the different loading modes
●	SEM analysis	- evaluation of microstructure to better describe the final deformation behaviour of tested materials in light of microstructure (grain size, orientation of grains, etc.)
		- an area of 250 × 250 µm2 was selected for scanning and the step size was 0.2 µm.