Table 1.

Crack pattern parameters for the simulated strain profiles Figure 7c–e.

Number	Position	Crack Width	Maximum Strain ${\mathit{\epsilon }}_{\mathbf{max},\mathit{k}}$ in $\mathbf{\mu }\mathit{\epsilon }$
$\mathit{k}$	${\mathit{x}}_{\mathbf{cr}\mathbf{,}\mathit{k}}$ in $\mathbf{m}$	${\mathit{w}}_{\mathbf{cr}\mathbf{,}\mathit{k}}$ in $\mathbf{\mu }\mathbf{m}$	$\mathit{\gamma }\mathbf{=}\mathbf{7}{\mathbf{m}}^{\mathbf{-}\mathbf{1}}$	$\mathit{\gamma }\mathbf{=}\mathbf{25}{\mathbf{m}}^{\mathbf{-}\mathbf{1}}$	$\mathit{\gamma }\mathbf{=}\mathbf{35}{\mathbf{m}}^{\mathbf{-}\mathbf{1}}$
1	0.2	181	1267	4525	6335
2	0.37	295	2065	7375	10,325
3	0.53	354	2478	8850	12,390
4	0.716	450	3150	11,250	15,750
5	0.91	321	2247	8025	11,235
6	1.03	220	1540	5500	7700
7	1.13	308	2156	7700	10,780
8	1.24	21	147	525	735
9	1.35	273	1911	6825	9555
10	1.42	211	1477	5275	7385
11	1.54	109	763	2725	3815
12	1.64	213	1491	5325	7455
13	1.75	77	539	1925	2695
14	1.895	293	2051	7325	10,255
15	2.08	1253	8771	31,325	43,855
16	2.3	369	2583	9225	12,915
17	2.455	836	5852	20,900	29,260