Table 2.
FRS deviation comparison between experimental and analytical (FEA) results under static loading conditions.
| Time | Load | FRS deviation comparison for experiment vs. analytical (FEA) under static loading condition | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | |||||||||||
| minutes | kN | Experiment (S1E) | Analytical (FEA) (S1A) | Total deviation S1 (S1E–S1A) | Experiment (S2E) | Analytical (FEA) (S2A) | Total Deviation S2 (S2E–S2A) | Experiment (S3E) | Analytical (FEA) (S3A) | Total deviation S3 (S3E–S3A) | Total deviation average (S1, S2, S3) |
| 0 | 0 | 0.00 | 0 | 0 | 0.00 | 0 | 0 | 0.00 | 0 | 0 | 0 |
| 1 | 10 | 1.33 | 0.812 | 0.518 | 1.41 | 0.812 | 0.608 | 1.20 | 0.773 | 0.407 | 0.511 |
| 2 | 20 | 1.74 | 1.523 | 0.217 | 1.53 | 1.608 | 0.078 | 1.60 | 1.568 | 0.032 | 0.109 |
| 3 | 30 | 2.25 | 2.384 | 0.134 | 2.31 | 2.405 | 0.095 | 2.10 | 2.248 | 0.148 | 0.125667 |
| 4 | 40 | 2.70 | 3.081 | 0.381 | 2.90 | 3.201 | 0.301 | 2.40 | 2.926 | 0.526 | 0.402667 |
| 5 | 50 | 3.28 | 3.484 | 0.204 | 4.26 | 3.998 | 0.262 | 3.10 | 3.846 | 0.746 | 0.404 |
| 6 | 60 | 4.22 | 4.679 | 0.459 | 5.38 | 4.795 | 0.585 | 4.30 | 4.540 | 0.240 | 0.428 |
| 7 | 70 | 5.69 | 5.416 | 0.274 | 6.36 | 5.592 | 0.768 | 5.40 | 5.384 | 0.016 | 0.352667 |
| 8 | 80 | 6.21 | 6.254 | 0.044 | 6.91 | 6.388 | 0.522 | 6.40 | 6.189 | 0.211 | 0.259 |
| 9 | 90 | 7.37 | 7.120 | 0.250 | 8.14 | 7.185 | 0.955 | 7.20 | 6.842 | 0.358 | 0.521 |
| 10 | 100 | 7.61 | 7.818 | 0.208 | 9.31 | 7.981 | 1.329 | 7.40 | 7.695 | 0.295 | 0.610667 |
| Total average % | 0.338515 | ||||||||||