Table 4.
PZS deviation comparison between experimental and analytical (FEA) results under static loading conditions.
| Time | Load | PZS Deviation comparison for experiment vs. analytical (FEA) under static loading condition | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| mm | |||||||||||
| minutes | kN | Experiment (S1E) | Analytical (FEA) (S1A) | Total deviation S1 (S1E–S1A) | Experiment (S2E) | Analytical (FEA) (S2A) | Total deviation S2 (S2E–S2A) | Experiment (S3E) | Analytical (FEA) (S3A) | Total deviation S3 (S3E–S3A) | Total Deviation Average (S1, S2, S3) |
| 0 | 0 | 0.00 | 0 | 0 | 0.00 | 0 | 0 | 0.00 | 0 | 0 | 0 |
| 1 | 10 | 1.12 | 0.812 | 0.308 | 2.31 | 0.812 | 1.508 | 1.20 | 0.773 | 0.407 | 0.741 |
| 2 | 20 | 1.80 | 1.523 | 0.277 | 2.94 | 1.608 | 1.332 | 1.76 | 1.568 | 0.192 | 0.600333 |
| 3 | 30 | 2.15 | 2.384 | 0.234 | 3.26 | 2.405 | 0.855 | 2.23 | 2.248 | 0.018 | 0.369 |
| 4 | 40 | 2.93 | 3.081 | 0.151 | 4.18 | 3.201 | 0.979 | 2.85 | 2.926 | 0.076 | 0.402 |
| 5 | 50 | 3.35 | 3.484 | 0.134 | 4.92 | 3.998 | 0.922 | 3.34 | 3.846 | 0.506 | 0.520667 |
| 6 | 60 | 4.17 | 4.679 | 0.509 | 5.87 | 4.795 | 1.075 | 4.27 | 4.540 | 0.270 | 0.618 |
| 7 | 70 | 4.98 | 5.416 | 0.436 | 6.77 | 5.592 | 1.178 | 4.89 | 5.384 | 0.494 | 0.702667 |
| 8 | 80 | 5.72 | 6.254 | 0.534 | 7.60 | 6.388 | 1.212 | 5.75 | 6.189 | 0.439 | 0.728333 |
| 9 | 90 | 6.53 | 7.120 | 0.590 | 8.87 | 7.185 | 1.685 | 6.45 | 6.842 | 0.392 | 0.889 |
| 10 | 100 | 7.15 | 7.818 | 0.668 | 9.98 | 7.981 | 1.999 | 7.23 | 7.695 | 0.465 | 1.044 |
| Total average % | 0.601364 | ||||||||||