Table 3.

ASICs in PET: overview on the hardware characteristics and required supply voltages of different ASICs designed for HEP and PET applications. Tabular taken from [67] and modified

ASIC	Supply voltage/V	Power consumption/mW/ch	Signal polarity	Input stage mode	Charge measurement	Output	References
TOFPET1		8 to 11	pos	Current	TOT	Digital	[79]
TOFPET2b/c	1.2	5 to 8	pos	Current	QDC, TOT, mixed	Digital	[22, 80]
TOFHiR 2A	1.2						[81]
TOFPET3		8	pos, neg	Current	QDC, TOT, mixed	Digital	[82]
Citiroc 1A	3.3	3 (excl. buff.)	pos	Current	QDC		[83, 84]
Petiroc	3.3	3.5 (excl. buff.)		Current	TOT		[83, 84]
Petiroc 2A	3.3	6	pos, neg	Current	TOT		[83]
Triroc 1A	3.3	10 (excl. buff.)	pos, neg	Current	QDC	Digital	[85]
Radioroc		3 (excl. TDC)		Current	TOT		[25]
NINO		27 to 40	diff	Voltage	TOT	Analog	[86, 87]
FlexToT	pos	10		Current	QDC	Analog	[88–91]
HRFlexToT		3.5	pos	Current	QDC	Analog	[24, 87, 92]
MATRIX16	1.8	9.1	pos	Current	QDC	Digital	[93]
FastIC	1.2	12	pos, neg, diff	Mixed	QDC	Analog
FastICpix							[94, 95]
PETA4	1.8	40	neg, diff	Mixed	QDC	Digital	[23]
PETA5	1.8	43	neg, diff	Mixed	QDC	Digital	[96]
PETA6	1.8	33	pos, neg, diff	Mixed	QDC	Digital	[97, 98]
PETA8		13			QDC	Digital	[98, 99]
PETAT1		13			QDC	Digital	[100]
STIC3		25	diff	Voltage	tot	Digital	[101]
EXYT		< 5	diff, pos, neg	Mixed			[102]
DIET		5	diff, pos, neg	Mixed	QDC		[103]
TODPET		4.8	diff, pos, neg	Mixed	TOT		[104]
MPPC32		15			TOT		[105]
IMOTEPAD	3.3	16.8		Mixed	TOT	Digital	[106]