Table 1. Parameter values used in model calculations.

Parameter	Set 1†	Set 2‡
Contact line radius, B, mm	0.85§	0.85
Surface tension, σ, dyne/cm	72¶	72
Maximum pressure, β	0.90∥	0.90
Effective pore length, L, mm	5.5††	5.5
Effective pore radius, R, μm	2.4‡‡	1.9
Effective number of pores, N	28.3 × 106§§	24.8 × 106
Dielectric constant × zeta potential, ε|ζ|, V·C2/J·m	6.56 × 10-11¶¶	2.74 × 10-11

Parameters are listed in order of increasing uncertainty.

^†Nominal values

^‡In-house characterization; details to be reported elsewhere.

^§Measured value.

^¶From ref. 9.

^∥Calculated for Θ_total = 6.5.

^††From the measured frit thickness and a typical value of tortuosity (7).

^‡‡Mean of manufacturer's specifications.

^§§Via porosity measurement.

^¶¶From ref. 7.