Skip to main content
Mechanobiology in Medicine logoLink to Mechanobiology in Medicine
. 2025 Feb 1;3(1):100115. doi: 10.1016/j.mbm.2025.100115

Toward a clear relationship between mechanical signals and bone adaptation

Chenlu Wang 1, Ruisen Fu 1, Haisheng Yang 1,⁎
PMCID: PMC12082172  PMID: 40396131

Abstract

Bone adapts according to the mechanical environment, and this adaptation can be visualized by altering its shape, size, and microarchitecture. Bone adaptation was recognized more than a century ago, with a description presented in The Law of Bone Remodeling. Furthermore, the conceptual model of “The Mechanostat” provides a quantitative relationship between the magnitude of bone tissue deformation (strain) and bone adaptive responses. However, upon maintaining a constant strain magnitude, various bone responses were observed experimentally under different loading parameters (e.g., frequency, rate, number of load cycles, rest insertion, and waveform). Nevertheless, the precise relationship between mechanical signals and bone adaptation remains unclear. Accordingly, we reviewed in vivo loading studies to determine the quantitative relationships between various mechanical signals and bone adaptive responses in various animal loading models. Additionally, we explored how these relationships are influenced by pathophysiological factors, such as age, sex, and estrogen deficiency. Moreover, mechanistic studies that consider cellular mechanical microenvironments to explain these quantitative relationships are discussed. A general formula that considers the bone adaptive response as a function of different loading parameters was proposed. This review may enhance our understanding of bone adaptation and offer guidance for clinicians to develop effective mechanotherapies to prevent bone loss.

Keywords: Bone adaptation, In vivo loading, Animal models, Mechanical signals, Osteocyte

Graphical abstract

Fig. Overview of the present review paper. In this review, we first started with a summary of typical animal models used for in vivo loading, and then comprehensively summarized the results regarding the relationships between different loading parameters and bone responses, which have been identified by those in vivo animal loading experiments. Next, we examined how these relationships were influenced by pathophysiological factors such as age, sex, estrogen deficiency, disuse, and different disease states. Lastly, we discussed underlying mechanisms governing these load-bone adaptation relationships.

Image 1

1. Introduction

Bone supports the skeletal system and facilitates multiple functions, including locomotion, organ protection, appropriate mineral storage, and maintenance of hematopoietic cells.1 Bones reshape their appearance and maintain structural and functional integrity through two basic physiological activities: bone modeling and bone remodeling.2 Bone modeling refers to the process of shaping skeletal elements and ensuring the acquisition of appropriate bone morphology and mass.2, 3, 4 During this process, bone resorption and formation, governed by osteoclasts and osteoblasts, respectively, occur in an uncoupled manner on separate surfaces.5 Bone remodeling ensures tissue turnover while maintaining bone mass; it also allows adaptation to mechanical loading and requirements of calcium and phosphate metabolism in the mature skeleton.3,4,6 Bone resorption and formation are tightly coupled.7 A reduction in mechanical stimuli (e.g., space flight8 and long-term bed rest9) results in an imbalance between bone formation and resorption, eventually leading to bone loss or osteoporosis10 (Fig. 1). In contrast, enhanced mechanical loading (e.g., exercise) could promote bone formation, thereby increasing bone mass.11,12

Fig. 1.

Fig. 1

Bone formation and resorption are regulated by mechanical loading. A reduction in mechanical loading (e.g., spaceflight) leads to bone loss, while an increase in mechanical loading (e.g., exercise) could increase bone mass.

In the 15th century, Galileo discovered that the shape and size of bones are related to mechanical forces.13,14 Von Meyer found arched trabecular patterns in sagittally sectioned human first metatarsal and calcaneus, and Culmann suggested that the patterns appeared to be aligned along the directions of principal stress produced by functional loading.15 Inspired by von Meyer et al., Julius Wolff hypothesized that “the direction and pattern of loading influences and/or controls the pattern of the cancellous framework”16 (Fig. 2a). Subsequently, Roux recognized that functional adaptation of the bone is a dynamic and self-regulating process.17, 18, 19 Thomson and Frost also proposed that loading-induced tissue deformation (strain) affects bone cells, thus regulating the adaptive response of the bone.20 In summary, Roesler highlighted three key concepts regarding the ability of bone to adapt to changing mechanical loads: (1) bone structure optimizes strength with respect to the amount of material used, (2) trabeculae line up with principal stress directions, and (3) these are accomplished by a self-regulating system of bone cells responding to a mechanical stimulus.17,21 Currently, Wolff's law remains a rather poorly defined “law,” but it roughly includes these three core principles.21,22 Furthermore, Frost proposed a conceptual model, “The Mechanostat,” which quantitatively described the relationship between strain magnitude and bone adaptative responses.23,24 “The Mechanostat” theory indicates that bone mass and architecture are locally controlled by bone cells, corresponding to the difference between the actual mechanical strain and different thresholds (set points). Accordingly, the bone formed when actual strain exceeded the set point and was resorbed when the actual strain was below the set point; in both cases, the strains were restored to the level of the set point (Fig. 2b). Frost also noted that certain bone diseases, such as osteogenic imperfecta, may have higher set points.25 Additionally, set points may be similar across species.26,27 “The Mechanostat” theory substantially advances the understanding of bone mechanical adaptation. Currey also recognized that a change in stiffness affects the strain induced by the same mechanical forces.28,29

Fig. 2.

Fig. 2

Mechanical adaptation of bone. (a) Julius Wolff popularized the idea that trabecular bone is aligned along the lines of stress (adapted from 22). (b) Illustration of the “mechanostat” hypothesis (modified from 24). The horizontal axis depicts peak bone strain, and the vertical axis depicts net loss (−) or gain (+) of bone mass. The lower pulsed line shows the threshold values of “minimum effective strain” (MES) for remodeling (MESr), modeling (MESm), microdamage (MESp), and fracture strain (Fx). The regions labeled at the top represent the disuse window (DW), adapted window (AW), mild overload window (MOW), and pathologic overload window (POW).

The development of in vivo strain gauging technology,30,31 which allows the measurement of local strain on the bones of living animals/human beings, and the utilization of functional disuse models,32, 33, 34 has helped researchers to better understand the relationship between strain and bone adaptation. For example, Lanyon et al. implanted electrical-resistance strain gauges on the tibial bone surfaces of humans and mice to quantify the strain stimuli generated during various activities.35,36 Turner et al. found that osteogenic responses were enhanced with increases in strain magnitude.37 Rubin and Lanyon reported that new bone formation occurred at peak strain sites.26

Undoubtedly, load/strain magnitude is an important factor governing bone mechanoadaptation. However, the load must be dynamic to induce a bone response.38,39 Likewise, several in vivo loading experiments40,41 have indicated that bone responses to externally applied mechanical loading are influenced by numerous loading parameters other than strain magnitude, such as frequency, rate, number of load cycles, rest insertion, and waveform. Although emerging animal loading studies have enhanced our understanding of bone adaptation to mechanical loading, the relationship between different mechanical signals and adaptive bone responses remains unclear. In this review, we first summarize the typical animal models used for in vivo loading (Fig. 3) in Section 2. In Section 3, we comprehensively summarize the results regarding the relationships between different loading parameters and bone responses, which were identified in the in vivo animal loading experiments (Fig. 3). In Section 4, we examine how these relationships are affected by pathophysiological factors, such as genetics, sex, age, disuse, estrogen deficiency, nutrition, and circadian rhythm (Fig. 3). Finally, in Section 5, we discuss the cellular biomechanical mechanisms that govern the relationship between various mechanical signals and bone adaptation (Fig. 3). This review could enhance our understanding of bone mechanoadaptation and ultimately assist orthopedic researchers and medical practitioners in designing effective biomechanical interventions, such as loading/exercise regimes, to prevent bone loss induced by aging, estrogen deficiency, or disuse.

Fig. 3.

Fig. 3

Overview of the present review paper. This review summarizes typical animal models used for in vivo mechanical loading, highlighting the relationships between loading parameters and bone responses. Subsequently, the review examines how these relationships are affected by factors such as age, sex, estrogen deficiency, disuse, and disease states and concludes with a discussion on the underlying mechanisms that govern load-induced bone adaptation.

2. Typical animal loading models used to examine bone responses to various loading parameters

Various in vivo animal loading models have been developed over the years and used to examine the influence of mechanical loading on osteogenesis. Typically, there are two types of in vivo loading models: intrinsic (e.g., running,42,43 jumping,44 and swimming45) and extrinsic, which can be further categorized into invasive and noninvasive.

Intrinsic loading models typically induce mechanical stimuli on the bones via ground reactions and muscle-related forces through various physical activities. In these experiments, animals are trained to perform a certain type of exercise to induce strains higher than those induced by daily activities.46 However, even within the same experimental group, the peak strain and strain distribution within the same bone under the same type of exercise regimen vary greatly among animals,47,48 complicating the identification of any precise relationships between mechanical signals and bone responses with this type of model.

In contrast, extrinsic animal loading models (including invasive and noninvasive loading models) allow for the application of controllable precise mechanical signals, facilitating the exploration of quantitative relationships between different mechanical signals and bone adaptation (Fig. 4). Additionally, the contralateral non-loaded limb can be used as a within-animal control,49 thereby improving the accuracy of the identified quantitative relationships. Therefore, our discussion focuses on the extrinsic loading models (Table 1).

Fig. 4.

Fig. 4

Animal loading models used to examine bone adaptation under various loading parameters (modified from 22). (a) Axial compression of the tibia with implanted pins. (b) Avian surgically-isolated ulnar loading. (c) Vertebral compression. (d) Four-point bending. (e) Cantilever bending. (f) Axial compression of tibia. (g) Off-axis compression. (h) Knee-loading.

Table 1.

A summary of in vivo animal loading models commonly used to determine the quantitative relationships between various mechanical signals and bone adaptive responses.

Loading model Stimulated bone types Bone tested Animal model Complications Advantages Physiological loading direction?
Axial compression of tibia with implanted pin Cortical Tibia Rabbit50 Injury-induced bone formation; technically challenging No attenuation of mechanical signal ×
Sheep51,52
Dog53
Avian surgically-isolated ulnar loading Cortical Ulna Turkey54 Injury-induced bone formation; technically challenging No attenuation of mechanical signal ×
Chicken55
Vertebral compression Cancellous Vertebra Rat56,57 Injury-induced bone formation; technically challenging Suitable for studying the cancellous bone √
Cortical Mouse58, 59, 60, 61
Four-point bending Cortical Tibia Rat62 Woven bone is induced at the periosteal surface Noninvasive ×
Mouse63,64
Three-point bending Cortical Tibia Mouse65,66 Woven bone is induced at the periosteal surface Noninvasive ×
The third metatarsal
Cantilever bending Cortical Tibia Mouse67,68 Limited strain magnitude Noninvasive; suitable for studying the endosteum and periosteum ×
Axial compression of ulna Cortical Ulna Rat69 Soft tissues attenuate the mechanical signal Noninvasive √
Mouse70
Rabbit71
Axial compression of the tibia Cortical Tibia Rat72 Soft tissues attenuate the mechanical signal Noninvasive √
Cancellous Fibula Mouse73,74,75, 76, 77, 78, 79, 80
Off-axis compression Cortical Tibia Mouse81 Technically challenging Noninvasive; reduces the applied loading required to induce a given peak strain ×
Cancellous
Knee-loading Cortical Tibia Mouse82, 83, 84 Technically challenging Noninvasive ×
Femur

2.1. Invasive animal loading models

Hert et al. investigated how the skeleton responded to mechanical loading by exerting a load on wires placed into a rabbit's tibia.50 In this model, Kirschner wires were inserted into holes drilled through the proximal and distal tibial metaphyses of anesthetized rabbits, which required approximately 30 ​d for healing (Fig. 4a). After healing, the tibia was loaded in axial compression by clamping the two wires together or in mediolateral bending by clamping the lateral wire tips together and drawing the medial wire tips. This model has also been applied to other species, including sheep51,52 and dogs.53

Subsequently, Rubin et al. designed an avian ulnar loading model in which the proximal and distal metaphyseal regions of the rooster (or turkey) ulna were sawed, creating two small incisions between the central 80 ​% of the ulna and bone end.54 Metal caps were affixed to the two ends of the functionally isolated ulnar shaft (Fig. 4b). Finally, Steinmann pins were inserted into the pre-drilled holes in the caps to receive the actuator-generated forces.55 During the non-loading sessions, the pins were clamped to prevent notable deformation of the ulnar shaft. Nevertheless, the ulna was in a state of disuse between loading sessions.

Chambers et al. established a rodent vertebral compression model, where the two vertebrae adjacent to the rat 8th caudal vertebra (i.e., CV7 and CV9) were pierced and pinned using Steinmann pins.56, 57, 58 After implantation, the two pins were connected using an actuator that cyclically drew the two pins together, thereby applying a dynamic compressive load to CV8 through the adjacent vertebrae and intervertebral discs (Fig. 4c). This loading model was also used to examine the adaptive response of CV6 to mechanical loading, with CV5 fixed and CV7 loaded.59

Among the three models discussed above, the main advantages of the axial compression of the tibia with implanted pins and avian surgically isolated ulnar loading models over the vertebral compression model are as follows: 1) they are suitable for investigating cortical bone adaptation to loading, and 2) the mechanical signals generated by the actuator are transmitted through markedly rigid materials rather than through joints and soft tissues, and therefore, they are maintained at a high degree of integrity in the bone. The vertebral compression model is more suitable for studying the adaptive response of the vertebral cancellous bone to loading,60,61 although the actuator-generated mechanical signals must travel through the intervertebral discs; therefore, they are potentially weakened or altered upon reaching CV8.

2.2. Noninvasive animal loading models

Although invasive loading models have advantages in maintaining the accuracy of the mechanical signals during transmission, unexpected bone responses due to surgical interventions are one of the main concerns, potentially confounding the results of interest.55 To address these concerns, noninvasive loading models have been developed and implemented in rodents.

Turner et al. created the first noninvasive animal loading model,62 that is, a four-point bending of the rat tibia. This model was later adapted and applied to the mouse tibia.63,64 In this model, the tibia is located between the upper and lower fixed pads. Compressive loading was applied through the upper contact points, that resulted in a bending moment in the central diaphysis spanning between the two upper contact points (Fig. 4d). Sham loading control with no bending of the bone was achieved by placing the upper contact points directly opposite the lower contact points. A three-point bending model is similar to a four-point bending model,64, 65, 66 although both models usually produce a strong woven bone response on the periosteal surface, independent of the magnitude of the applied load, limiting their applicability for investigating periosteal osteogenesis.27,62

To avoid periosteal woven bone-forming issues, Gross et al. developed a cantilever-bending model of the mouse tibia,67 in which the proximal tibia of the mouse was fixed, whereas the distal tibia was pushed medially by an actuator, inducing mediolateral bending of the tibia (Fig. 4e). However, the metaphyseal region containing cancellous bone remains largely unloaded. Therefore, the model cannot be used to examine the adaptive response of cancellous bone to loading. Additionally, the magnitude of the applied load or the strain induced by the loading within the bone is limited owing to challenges in firmly fixing the knee.68

Currently, axial compression of the tibia or ulna is widely used to study the mechanoadaptation of bone.69, 70, 71, 73, 74, 72 This model was initially developed by Torrance et al. and was first applied to the rat ulna.69 The ulna was fixed between two small metal cups. One end of the cup received the elbow, while the other end received the dorsal surface of the volar-flexed wrist (Fig. 4f). Under axial compression, the diaphysis of the loaded bone is naturally bent, and most of the axial compression is transformed into a mediolateral bending moment.75 Therefore, the strain distribution within the bone induced by the axial compression was consistent with that measured in vivo during locomotion.76 This model has been widely used in mice with gene manipulations (such as congenic77 and knockout78, 79, 80) to elucidate the mechanobiological mechanisms of bone adaptation.

Based on the axial compressive loading model, Srinivasan et al. developed an off-axis compression model for mouse tibia.81 In this model, the foot of the mouse was secured in a custom footbed, with the direction of the knee and ankle joints aligned as during free walking, with the load applied to the distal femur using a loading tine (oriented 60 °from the vertical) (Fig. 4g). During the loading process, the loading tine was not aligned with the long axis of the tibia in either the anterior-posterior or medial–lateral planes, thereby achieving off-axis compressive loading.81 The primary advantage of this model over the axial compressive loading model is its capacity to reduce the applied loading magnitude required to induce a given peak strain.

In addition, to determine the effects of loading on bone formation at a site distant from the loading site, a knee-loading model was developed,82, 83, 84 in which the lateral and medial sides of the mouse knee (including the epiphysis of the proximal tibia and distal femur) were confined between the upper and lower cups (Fig. 4h). Mechanical loads were applied to the knee through the upper contact cups, keeping the tibial diaphysis distant from the loading site. This model was primarily used to study the adaptive response of the diaphyseal bone to knee loading.

In summary, each loading model has distinct advantages and limitations, and researchers should be aware of these when performing in vivo loading studies or interpreting the outcomes of loading models. For example, a three- or four-point bending model may induce a woven bone response on the periosteal surface. Although the cantilever bending model avoids this response, it fails to load the cancellous bone adequately, and the magnitude of the applied load or the strain induced by loading within the bone is limited.68 Axial compression models can generate a more physiologically mechanical environment but require greater loads,64,72,85 which may increase the risk of premature growth plate closure.86 The off-axis compression model addresses this issue by reducing the applied load magnitude, whereas the knee-loading model uniquely facilitates the investigation of adaptive responses in bones distant from the loading site.

Moreover, it should be noted that the mechanical environments (e.g., strain distribution) generated within the bone by the cantilever bending model and the three- or four-point bending models are non-physiological. Reportedly, bone responses may be more sensitive to accidental non-physiological loading than to habitual physiological loading.87 However, it remains unclear how non-physiological loading-induced bone responses differ from physiological loading.88 Therefore, when designing in vivo animal loading experiments, specific objectives and appropriate models must be considered to ensure the effectiveness and reliability of the experimental outcomes.

3. Key mechanical loading parameters affecting bone's adaptive responses

Daily activities, including physical exercise, produce mechanical signals in load-bearing bones. Mechanical signals are forces or strains as functions of time and consist of several basic parameters such as magnitude, frequency, rate, waveform, number of load cycles, and rest insertion89,90 (Fig. 3). The measurement of human tibial strain or ground reaction force revealed that strain-time curves vary under different forms of locomotion.89,91,92 Different types of exercise produce distinct loading signals or parameters. For instance, the axial peak compressive strain was 2.9 times higher during overground running than during treadmill running.90 The step frequency during running was higher than that during walking.93 The strain rate can double or triple during vigorous activities when compared with walking at a comfortable speed.93,94 To design effective exercise regimens to improve bone health, it is important to identify precise relationships between loading signals (or parameters) and bone adaptation. Over the last four decades, investigations have attempted to understand the “black box” of bone mechanoadaptation by altering loading parameters (inputs) and measuring bone responses (outputs) in a variety of in vivo animal loading models (Table 2).

Table 2.

A summary of relevant studies and findings regarding the effects of different loading parameters on bone adaptation.

Reference Loading form Animal model Loading parameters Key findings
Load/strain magnitude
Turner et al.27 Four-point bending Rat tibia 27, 33, 40, 52, or 64 ​N The amount of new woven bone and the woven bone-forming surface are independent of the magnitude of applied strain.
Turner et al.37 Four-point bending Rat tibia 30, 40, 52, or 64 ​N Older rats have a greater mechanical threshold of bone formation than adult rats.
Turner et al.62 Four-point bending Rat tibia 37 ​N The woven bone is formed in areas with high strain, and its formation can be attributed to the bending stimulus rather than pathology.
Lee et al.70 Axial compression Mouse ulna 3 or 4.3 ​N Loading to peak strains of 2000 με stimulates lamellar periosteal bone formation but no response endosteally; loading to peak strains of 3000 με induces a mixed woven/lamellar periosteal response and lamellar endosteal bone formation.
Yang et al.74 Axial compression Mouse tibia 3.5, 5.2, or 7 ​N Cancellous bones may have a greater adaptive strain threshold than cortical bone.
De souza et al.76 Axial compression Mouse tibia Applied loads between 5 and 13 ​N A dose-dependent response to loading magnitude can be observed in the periosteal bone.
Hsieh et al.95 Axial compression Rat ulna 5, 10, 15, or 20 ​N The strain threshold varies from 1343 με proximally to 2284 με at the midshaft to 3074 με distally.
Sugiyama et al.96 Axial compression Mouse tibia 0, 2, 4, 6, 8, 10, 12, or 14 ​N The functional adaptation of bone mass/strength related to loading is basically a linear response to the bone's physiological loading.
Berman et al.97 Axial compression Mouse tibia 8.8, 10.6, or 12.4 ​N A dose-dependent relationship exists between the magnitude of the applied load and the increase in cortical and cancellous morphological parameters.
Weatherholt et al.98 Axial compression Mouse tibia 5, 7, or 9 ​N A dose–response relationship to loading magnitude can be observed within cortical bone.
Mosley et al.99 Axial compression Rat ulna 5, 7, 11, 15, or 19 ​N During the growth process, there is a substantial linear relationship between the magnitude of the applied load and the reduction of longitudinal growth.
Brodt et al.100 Axial compression Mouse tibia 8, 10, or 12 ​N A dose–response relationship is evident, with greater bone formation observed with increasing strain magnitude.
Load/strain frequency
Warden et al.41 Axial compression Mouse ulna 1, 5, 10, 20, or 30 ​Hz Cortical bone adaptation to mechanical loading increases with increasing loading frequency up to 5–10 ​Hz, plateauing thereafter (non-linear).
Rubin et al.101 Avian surgically-isolated ulnar loading Turkey ulnar 1 or 20 ​Hz The degree of growth depends on the frequency of strain application, responding in a dose manner.
Hsieh et al.102 Axial compression Rat ulna 1, 5, or 10 ​Hz Cortical bone formation increases successively with increasing loading frequency up to 10 ​Hz.
Chen et al.103 Axial compression Rat ulna 5, 10, or 15 ​Hz Bone adaptation to mechanical loading increases with increasing loading frequency.
Turner et al.104 Four-point bending Rat tibia 0.05, 0.1, 0.2, 0.5, 1.0, or 2.0 ​Hz Bone formation rate increases in a dose-dependent manner at a frequency of 0.5–2 ​Hz.
Scheuren et al.105 Vertebral compression Mouse CV6 2, 5, or 10 ​Hz There is a logarithmic relationship between loading frequency and the cancellous bone adaptation.
Load/strain rate
Turner et al.38 Four-point bending Rat tibia 0, 0.013, 0.026, or 0.039 s−1 The amount of new bone formation is directly proportional to the rate of strain in the bone tissue.
Mosley et al.106 Axial compression Rat ulna 0.018, 0.030, or 0.100 s−1 Within the physiological range, high strain rates are associated with more osteogenic response than low strain rates.
LaMothe et al.107 Cantilever bending Mouse tibia 0.004, 0.020, or 0.100 s−1 The higher the strain rate, the stronger the adaptive response of the periosteal surface, and the adaptability of the endosteal does not increase with the strain rate.
Number of load cycles
Yang et al.40 Axial compression Mouse tibia 36, 216, or 1200 cycles per day Relatively few load cycles (e.g., 36) are sufficient to induce osteogenic responses, and the incremental increase in osteogenic reactions decreases as the number of load cycles increases.
Rubin et al.55 Surgically-isolated ulnar loading Rooster ulna 4, 36, 360, or 1800 cycles per day 36 cycles/day and 1800 cycles/day can also effectively promote bone formation.
Torrance et al.69 Axial compression Rat ulna 20, 1200, or 12,000 cycles per day Increasing the number of load cycles per day from 1200 to 12,000 did not induce any increase in loading-related bone formation.
Sun et al.108 Axial compression Mouse tibia 60, 300, or 1200 cycles per day Varying the daily cycle number from 60 to 1200 exerts no effect.
Umemura et al.109 Jumped with electric stimulus Rat femur 5, 10, 20, 40, or 100 jumps per day Five jumps per day are sufficient to increase bone mass, and the continued increase in the number of jumps will reduce the return on bone mass.
Rest insertion
Yang et al.40 Axial compression Mouse tibia 10 ​s rest inserted at −1 ​N between every 4 load cycles 10 ​s rest time between load cycles did not improve the osteogenic response of cortical or cancellous bone tissue.
Robling et al.75 Four-point bending Rat tibia Recovery time of four loads: 0, 0.5, 1, 2, 4, or 8 ​h
Rest inserted between each load cycle: 0.5, 3.5, 7, or 14 ​s
Approximately 4–8 ​h of recovery is sufficient to restore full mechanosensitivity to the cells; a longer cycle interval can improve the osteogenic response more than a shorter interval.
Robling et al.110 Four-point bending Rat tibia 360 cycles are delivered in 1, 2, 4, or 6 bouts (i.e., 360 ​× ​1, 180 ​× ​2, 90 ​× ​4, or 60 ​× ​6) 360 daily load cycles applied at intervals of 60 ​× ​6 or 90 ​× ​4 represent a better osteogenic stimulus than 360 cycles applied all at once.
Srinivasan et al.111 Surgically-isolated ulnar loading Turkey ulna 10 ​s (zero-load) rest inserted between each load cycle Low-magnitude mechanical loading becomes osteogenic when rest is inserted between each load cycle.
Srinivasan et al.112 Cantilever bending Mouse tibia 10 ​s (zero-load) rest inserted between each load cycle In aged bones, inserting 10 ​s of rest between low-magnitude load cycles initiates and enhances bone formation.
Interactions of different loading parameters
Liu et al.113 Axial compression Rat tibia Load magnitude: 10 ​N, 20 ​N, and 40 ​N A high strain level can markedly induce an osteogenic response in a short time while prolonging the experiment time at a medium strain level can also substantially improve bone quality.
Load cycles: 2 weeks and 4 weeks
Qin et al.114 Avian surgically-isolated ulnar loading Turkey ulnae 30 ​Hz, 9N, 108000 cycles Sufficient numbers of load cycles are applied at an appropriate high frequency, while an extremely low strain level can also prevent bone loss in the disused state.
LaMothe et al.115 Cantilever bending Mouse tibia Rest insertion: 10 ​s (zero-load) Although the addition of rest insertion reduces the number of cycles by 10 times, the combination of rest insertion and high-frequency loading enhances osteogenesis.
Load cycles: 100 or 10 cycles per day
Srinivasan et al.116 Cantilever bending Mouse tibia Rest insertion: 10 ​s (zero-load) Rest intervals reduce the number of loading bouts required to enhance bone formation.
Load bouts: Three bouts or one bout per week
Srinivasan et al.117 Cantilever bending Mouse tibia Rest insertion: 10 ​s (zero-load) Rest insertion loading rapidly amplifies the response of bone to small increases in strain and load cycles.
Load magnitude: 1000, 1250, or 1600 με
Load cycles: 10, 50, or 250 cycles per day

3.1. Load/strain magnitude

Strain magnitude is a crucial factor that affects the mechanical adaptive response of bone.118 Generally, the peak strain induced within the bone is proportional to the magnitude of the applied load within the linear elastic range of the bone. The load-strain magnitude relationship also depends on the animal loading model and is affected by multiple factors, such as age and sex.64,72,85,119,120

Therefore, it is necessary to achieve a threshold strain prior to the initiation of bone formation.23 Below this strain threshold, there is an adaptive state called “lazy zone” where no net change in bone mass is observed.121 Results based on the four-point bending model of the rat tibia27 and the avian forelimb loading model26 suggest that the adaptive strain threshold may be similar across species. However, the adaptive strain threshold appears to be distinct across different anatomical bone sites and is affected by other factors.27,37,74,95, 122, 123 Specifically, cancellous bone may have a greater adaptive strain threshold than cortical bone.74 The adaptive strain threshold of the rat ulna increases in magnitude from the proximal to the distal end, and the strain threshold is greater in regions with higher strains.95 In a four-point bending model of the rat tibia, Turner et al. observed that older rats had a greater adaptive strain threshold than adult rats.27,37 In addition, Akhter et al.122 and Robling et al.123 suggested that the adaptive strain threshold is related to bone mineral density, although this hypothesis remains to be verified.

However, a few studies have demonstrated that the bone response to increasing strain magnitude is a continuous and essentially linear function.26,59,124 For instance, the experimental data reported by Rubin et al. showed that there was no “lazy zone” between the externally applied peak strain and the resulting change in bone area.26,124 This observation was later reported by Sugiyama et al. and Christen et al.96,125 However, these observations may have been confounded by other factors such as surgical invasion, disuse, and estrogen deficiency. Thus, future studies with refined experimental designs are required to provide convincing evidence supporting this perspective.

Nevertheless, studies have clearly demonstrated the existence of a dose–response relationship between the peak strain magnitude and osteogenesis when the mechanically induced strain surpasses the adaptive strain threshold.27,74,95,97, 98, 99, 100 Based on the outcomes of typical in vivo loading studies,27,40,95,98 we performed regression analyses (see Appendix) and determined the following relationship between the strain magnitude and bone adaptive responses (Fig. 5a):

y1=f1x1=a0+a1x1 (1)

where y1 represents the bone adaptive changes to loading (e.g., relative mineral apposition rate [rMAR]) and x1 is the peak strain. a0 and a1 are coefficients. The general form of the strain magnitude–response relationship obtained from different animal models was consistent. However, the slope and intercept of the fitted curve may depend on the animal-loading model, age, and other loading parameters.

Fig. 5.

Fig. 5

Based on outcomes of in vivo animal loading experiments, relationships between bone adaptive responses and mechanical loading parameters ((a) strain magnitude; (b) loading frequency; (c) strain rate; (d) number of load cycles) are determined by regression analyses (see Appendix for original data and detailed methods). Note: 4p indicates the four-point bending model; Axi represents the axial compressive loading model; KL represents the knee-loading model; p represents the periosteal surface; and e represents the endocortical surface.

3.2. Load/strain frequency

Compared with the strain magnitude, the loading frequency may affect the amount of new bone formation more substantially.126,101 Studies using the axial loading model of the rat ulna,102,103 the four-point bending model of the rat tibia,104 and the axial loading model of the mouse tibia127 have demonstrated that an increase in loading frequency leads to a dose–response increase in bone formation. However, cortical bone adaptation to mechanical loading increased with increasing loading frequency up to only 5–10 ​Hz, subsequently plateauing at frequencies beyond 10 ​Hz.41

Regression analyses (see Appendix) were performed based on the outcomes of several above-mentioned typical in vivo experimental studies.41,104,127 A logarithmic relationship was detected between loading frequency and bone adaptive responses. Among these studies, only one covered the frequency range of 1–30 ​Hz. Although including data from 20 to 30 ​Hz may reveal a plateau phase, this would compromise the integrity of the logarithmic relationships. Therefore, further research is required to investigate high-frequency phases. Scheuren et al. also demonstrated a logarithmic relationship between bone adaptation (e.g., relative bone volume fraction) and loading frequency, effectively showcasing the plateau phase.105 However, differences in bone formation parameters across studies make it challenging to obtain consistent adaptive bone response parameters. Therefore, the focus of this review is to emphasize the logarithmic relationship. Consequently, based on the existing data, we focused on presenting the logarithmic relationship rather than introducing high-frequency data that might obscure this key point (Fig. 5b).

y2=f2x2=b0+b1logx2 (2)

where y2 represents bone adaptive changes to loading (e.g., relative bone formation rate [rBFR/BS]) and x2 is the frequency. b0 and b1 are the constants.

3.3. Load/strain rate

The strain rate is an essential parameter for stimulating new bone formation.38,39 Several experiments demonstrated that the strain rate is a function of the strain magnitude and loading frequency.87 During normal gait, the increase in strain magnitude and frequency is reflected in the change in a single parameter of the strain rate. The strain rate also depends on the applied loading waveform (e.g., sinusoidal or trapezoidal).128 The strain rate and frequency can be isolated with trapezoidal or triangle loading waveforms by inserting “rest” between cycles or altering the length of time spent at the peak load.88,106 Sinusoidal waves can be used to separate the frequency and strain rates by changing the peak-to-peak strain values.38

In vivo loading studies have indicated that a higher strain rate can enhance bone formation when compared with low or medium strain rates. There is a dose–response relationship between the strain rate and periosteal new bone formation, whereas the adaptive response of the endosteal cortex does not increase with the strain rate.107 However, Turner et al. detected a linear relationship between the applied strain rate and endocortical adaptive responses.38 In addition, the dose–response relationship between the strain rate and bone adaptation was replicated in numerical simulations.129

Regression analyses were performed based on the outcomes of typical in vivo experimental studies38,107 and the relationship between the strain rate and bone-adaptive responses can be described as follows (Fig. 5c).

y3=f3x3=c0+c1x3 (3)

where y3 represents the bone adaptive changes to loading (e.g., rMAR), x3 is the strain rate, c0 and c1 are coefficients.

3.4. Number of load cycles

Various load cycles have been used for in vivo animal loading experiments.30,108, 130, 131 Only a few load cycles are required to induce the adaptive response of the bone (e.g., 4–60), and the bone formation response tends to exhibit diminishing returns with an increase in the number of load cycles.96,132 For example, establishing the isolated ulna model in a rooster, Rubin et al. showed that increasing the number of daily load cycles from 36 to 1800 did not enhance bone formation, suggesting that the response of bone cells to mechanical loading rapidly approached saturation.55 Likewise, Umemura et al. found that 5 jumps/day was sufficient to increase bone mass, and a continued increase in jumping times reduced the gain of bone mass.55 In addition, Yang et al. and Sun et al. showed that reducing the daily cycle number sequentially from 1200 to 300 to 60 did not diminish the bone formation response.40,55 Interestingly, load-induced osteogenesis of cancellous bone in the mouse tibia appeared to saturate faster than that of cortical bone in response to increasing numbers of daily load cycles.40

Regression analyses between the number of load cycles and bone responses based on previous experimental data40,55,133,109 determined the following logarithmic relationship (Fig. 5d):

y4=f4x4=d0+d1logd2+x4 (4)

where y4 represents the bone adaptive changes to loading (e.g., bone formation rate, cortical area (Ct.Ar), bone mass (BM), and bone mineral content (BMC)); x4 represents the number of load cycles per day; and d0, d1, and d2 are coefficients. A logarithmic relationship between the load cycle number and bone response has also been reported.40

3.5. Rest insertion

Following relatively few load cycles, the adaptive response of the bone reaches saturation, and the bone cells become insensitive to any additional mechanical stimulation. The mechanosensivity of the loaded bone can be restored by dividing the entire loading period into short bouts or by inserting rest times between individual cycles. Robling et al. found an enhanced osteogenic response when 360 cycles per day were divided into four bouts of 90 cycles or six bouts of 60 cycles per day,134,110 with an optimal response observed when a recovery period of 4–8 ​h was allowed between the loading bouts.135 Srinivasan et al. used a four-point bending model of adult turkeys and found that low-magnitude cyclic loading did not alter periosteal bone formation, whereas a combination of 10 ​s rest and low-magnitude loading was osteogenic.111 A study using a rat four-point bending model showed that 14 ​s of short intervals resulted in a substantially higher bone formation rate than the other three short intervals (0.5, 3.5, and 7 ​s).75 However, contradictory findings have also been documented; for example, in a tibial axial compressive loading study, inserting a rest between every four cycles yielded no benefits.40 These contradictory results could be attributed to the interactive effects of the different loading parameters.40 For example, inserting 10 ​s of rest between individual low-magnitude load cycles could markedly enhance periosteal bone formation in older mice, whereas the insertion of short intervals does not provide additional benefits when the strain magnitude or number of load cycles is doubled.112 These results suggested that the osteogenic effects of rest insertion may be suppressed by high-magnitude loads or strains.136

In addition, the contradictory results regarding short rest intervals and bone mechanoadaptation may arise not only from the interactive effects of different loading parameters but also from limitations in the current utilization of in vivo animal loading models. Studies often lack reproducibility owing to excessive standardization, such as genetic standardization (animals) and environmental standardization (housing and husbandry). Voelkl et al. demonstrated that multilaboratory designs with heterogeneous samples can improve reproducibility when compared with single-laboratory studies.137 Furthermore, challenges in standardizing protocols complicate the interpretation of results across different studies.138,139 Therefore, addressing these limitations is essential to advance our understanding of the precise relationship between mechanical signals and bone adaptation.

3.6. Loading waveform

The bone response to loading is sensitive to the loading waveform.106 Sinusoidal,58 trapezoidal,140 triangular,79 and sawtooth waveforms67 have been used in in vivo animal-loading studies. To our knowledge, no experimental studies have directly compared osteogenic responses between different loading waveforms, although computational studies have provided insights into this issue.141,142 Recently, finite element studies of the cortical bone simulating the gait loading waveforms of walking, running, and jumping indicated that only running can improve the pore pressure and fluid velocity in healthy and osteoporotic tissues.141 Kumar et al. conducted a numerical simulation using a cantilever-bending model of a mouse tibia to compare the pore pressure and poroelastic responses produced by three different non-sine waves.142 The authors found that, compared with sawtooth and triangular loading waveforms, trapezoidal loading generated the maximum pore pressure and canalicular fluid velocity.142

The strain rate, frequency, and magnitude of the loading waveform are interrelated. Turner proposed that the strain rate is proportional to frequency and strain magnitude. Turner87 assumed that the strain stimulus is proportional to the strain rate based on three rules for bone adaptation to mechanical stimuli, expressing the relationship between the strain stimulus and any periodic loading waveform using the Fourier transform method. This method allows any periodic loading waveform to be decomposed into the sum of sine waves at different strain magnitudes and frequencies. Consequently, by adding the contributions of the n significant frequency components of the waveform, the strain stimulus of any periodic waveform can be expressed as follows:

E=k1∑i=1nx1ix2i (5)

where E is the strain stimulus, x1 is the peak strain, x2 is the loading frequency, n is the number of significant frequency components, and k1 is a proportionality coefficient.

3.7. Interactions between different loading parameters

Previous experimental studies have indicated that distinct loading parameters have interactive effects on bone response. Rubin et al. found that dynamic loading with high-frequency (20–50 ​Hz) and extremely small strains (<10 με) exerted a positive effect on the cancellous bone formation of adult sheep.143 At a constant frequency, the number of load cycles required to activate formation depends on the strain magnitude.133 For example, a high level of strain can markedly induce an osteogenic response in a short time, whereas a prolonged medium-level strain can also be osteogenic.113 However, if a sufficient number of load cycles are applied at an appropriately high frequency, extremely low strain levels can prevent bone loss in the disused state.144 Qin et al. established a nonlinear relationship between the number of load cycles per day and the peak strain magnitude for bone mass maintenance by curve-fitting the results of several in vivo experimental studies.114

x1=102.28(5.6−log10x4)1.5 (6)

where x1 represents the peak strain and x4 is the load cycle number per day.

Interactions between rest insertion and other loading parameters also need to be considered. For instance, Srinivasan et al. demonstrated that 50 low-magnitude load cycles per day were not osteogenic, but inserting 10 ​s of rest between individual cycles could substantially enhance the periosteal bone formation rate.112 Additionally, using the tibia cantilever bending model, LaMothe et al. found that, compared with continuous loading of 30 ​Hz, inserting a 10 ​s rest period could markedly enhance the periosteal osteogenesis rate, although the total number of load cycles was reduced by 10-fold.115 Moreover, rest insertion can reduce the number of loading bouts required to enhance bone formation116 and rapidly amplify the response of the bone to small increases in strain and load cycles.117 Recently, a multiscale modeling study demonstrated that strain magnitude and rate were the main factors affecting the velocity and fluid shear stress in the lacunar-canalicular system of osteocytes, identifying interactions between strain magnitude, rate, and rest insertion.145

In summary, we provide a comprehensive review of the quantitative relationships between different mechanical signals and the adaptive responses of bone, which have been identified based on the outcomes of various in vivo loading studies. Bone mechanoadaptation is a complex and dynamic mechanobiological process influenced by various pathophysiological factors.

4. Factors affecting the relationships between mechanical signals and bone adaptation

In this section, we focus on the important pathophysiological factors that may influence the relationship between mechanical signals and bone adaptive responses, such as genetics, sex, age, disuse, estrogen deficiency, and circadian rhythm. These factors could alter the strain ‘setpoint’ (i.e., minimum effective strain) as illustrated in Frost's mechanostat diagram (Fig. 2b) and also modify the pre-identified relationships (Fig. 6). Here, we briefly review relevant studies and findings that may be valuable in designing effective mechanical regimens to improve bone health in the context of aging, disuse, and other circumstances.

Fig. 6.

Fig. 6

The relationships between mechanical loading parameters (e.g., strain magnitude, loading frequency, strain rate, number of load cycles, rest insertion, and loading waveform) and bone adaptive responses, including some that have been identified according to previous animal loading experiments and others that need to be determined.

4.1. Genetics

Experimental studies have found that the daily strain history is similar for bones of different species, with greater strains (>1000 με) occurring less frequently and very low strains (<∼200με) occurring thousands of times per day.146 However, changes in bone mineral density or gene expression induced by mechanical loading differ substantially in inbred mice.147,148 This implies that genetic components govern the osteogenic response of bone to mechanical loading.58,123,149

4.2. Sex

The response of bones to mechanical loading is sex-specific.150, 151, 152 Under the same peak strain of 2500 με, young female mice (19-week-old) gained more cortical bone than males in specific regions (e.g., around 37 ​% site) of the tibia, although these site-specific sex-dependent differences vanished with age (19-month-old).153 However, when similar levels of peak strain are engendered in males and females, the adaptive response of cancellous bone to mechanical loading does not depend on sex in growing mice.154 Factors affecting the differential loading responses of bones between males and females may include differences in estrogen and androgen receptors, bone mass, and structure.155,156

4.3. Age

According to the findings of an axial compression loading study, the deformation pattern and orientation of the neutral axis did not differ considerably between the tibiae of young adult and older mice.157 However, the bone appears to become less sensitive to mechanical loading with age85,158, 159, 160, 161, 162, 163 (Table 3). Birkhold et al. highlighted that mechanical responses within the endocortical bone surface continued to decline with age, whereas the main decay in the periosteal surface formation response occurred before adulthood.85 Subsequently, the authors found that mice in all age groups (young, adult, and older) responded to high strain by increasing bone formation and decreasing absorption, whereas low strain only had a strong osteogenic effect on young mice.158 Similarly, cancellous bone response to in vivo loading decreases with age.164,165 Contrary to these findings, several experimental studies found no difference in the mechanoresponse of cortical bone between young and adult mice.76,166 The adaptive responses of growing mice to mechanical loading may also be influenced by their growth rate.152 Collectively, these results indicate that the mechanical adaptability of the bone in older mice is substantially reduced. However, there is no consensus regarding how age affects bone mechanoadaptation prior to maturity.

Table 3.

Experimental studies examining the influence of age on bone adaptation to mechanical loading.

Reference Loading model Animal model Age Bone types Key findings
Turner et al.37 Four-point bending Rat tibia 9 and 19 months Cortical The relative bone-forming surface in old rats appears 5-fold less than in younger rats under similar loading conditions, with no significant differences observed in the formed woven bone.
Woven
De souza et al.76 Axial compression Mouse tibia 8, 12, and 20 weeks Cortical Loading markedly increases cancellous bone volume in 8-week mice but decreases at 12 and 20 weeks, while cortical bone formation appears similar.
Cancellous
Birkhold et al.85 Axial compression Mouse tibia 10, 26, and 78 weeks Cortical The osteogenic response of the periosteal surface and endosteal surface declines with the increase in mouse age.
Carriero et al.119 Axial compression Mouse tibia 10 and 22 weeks and 20 months – The magnitude of strain at a given load generally increases with age.
Patel et al.157 Axial compression Mouse tibia 5, 12, and 22 months – The deformation pattern and orientation of the neutral axis do not differ substantially in the tibia between young adult and older mice.
Razi et al.158 Axial compression Mouse tibia 10, 26, and 78 weeks Cortical The response of mice in all age groups to high strains occurs through increased formation and decreased absorption, while low strains only induce strong responses in young mice.
Holguin et al.159 Axial compression Mouse tibia 5, 12 and 22 months Cortical The young adult mice show greater periosteal bone formation following loading than middle-aged or old mice.
Cancellous
Woven
Birkhold et al.160 Axial compression Mouse tibia 10, 26, and 78 weeks Cortical Loading exerts a substantially stronger effect on formation than on resorption, which is mainly due to an increase in surface area formation with loading.
Birkhold et al.161 Axial compression Mouse tibia 10, 26, and 78 weeks Cortical Increased surface formation with mechanical stimulation is the only effect of loading, which is conserved into old age.
Cancellous
Rubin et al.162 Surgically-isolated ulnar loading Turkey ulna 1 and 3 years Cortical A physical signal that is clearly osteogenic in the young adult skeleton is hardly recognized in older bone tissue.
Lambers et al.163 Vertebral compression Mouse sixth caudal vertebra 15, 52, and 82 weeks Vertebrae The mechanical sensitivity of mouse vertebrae is maintained with age.
Meakin et al.164 Axial compression Mouse tibia 17 weeks and 19 months Cortical In adulthood, increasing age is associated with a reduction in adaptive responses of cortical and cancellous bones to loading in both male and female mice.
Cancellous
Lynch et al.165 Axial compression Mouse tibia 10 and 26 weeks Cortical The cancellous bone in the adult skeleton remains responsive to mechanical loading but requires greater osteogenic stimuli than a younger skeleton.
Cancellous
Willie et al.166 Axial compression Mouse tibia 10 and 26 weeks Cortical No difference can be observed in the mechanical reactivity of tibial cortical bone between young and adult mice, while the response of cancellous bone in adult mice to load is reduced and delayed than that in young mice.
Cancellous

With aging, the balance in mechanoregulated bone remodeling leads to reduced bone formation and enhanced bone resorption, eventually leading to a decrease in bone mass.167,168 Mechanical loading can increase cortical bone mass by shifting bone formation and resorption balance toward bone formation. Recently, Javaheri et al. proved that mechano-adaptive responses of aged bones are insufficient (although relatively high strain is induced) but can be restored by applying disuse or supra-physiological high-magnitude loads.169 The authors also proposed a new concept suggesting that the mechanoadaptation of aged bone is more sensitive to large strain gradients than to strain magnitude,169 providing new insights for the design of innovative exercise paradigms to combat age-related bone loss.

4.4. Disuse

Disuse-induced osteoporosis describes a state of bone loss due to local or systemic skeletal unloading (e.g., long-term bed rest,170 immobilization,171 paralysis,172 and spaceflight173,174). Disuse-induced bone loss follows a remodeling process similar to that typically occur during aging or osteoporosis.175 Disuse promotes the recruitment of osteoclasts to the bone surface for rapid bone resorption. Osteoblast precursors migrate to the bone surface and differentiate into osteoblasts, initiating bone formation. The main cause of bone loss is a reduction in mechanical loading.176 Preclinical rodent hindlimb unloading177 and sciatic neurectomy models32,178 have been commonly used to simulate disuse conditions and to examine how disuse affects bone mechano-responsiveness by applying extra in vivo mechanical loading to the disused bone. Interestingly, disused bone shows an enhanced response to loading.153,178, 179, 180, 181 However, recent experimental studies have shown that the mechanosensivity of the tibia to reloading is substantially compromised in mice previously exposed to disuse.182,183 Nevertheless, the mechanisms underlying these observations remain unknown and warrant further investigation.184

4.5. Estrogen deficiency

Estrogen affects bone mass by regulating the balance between bone formation and resorption.185 Estrogen deficiency causes a reduction in bone mass and rapid deterioration of the cancellous microstructure, leading to osteoporosis and increased fracture risk.186,187 Ovariectomy has been widely used to investigate the role of estrogen in the mechanical adaptation of the bone. In vivo studies have revealed that ovariectomy-induced estrogen loss increases the response of bones to mechanical loading and exercise.188,189 Low-dose estrogen treatment was shown to suppress periosteal bone formation in response to mechanical loading.190

4.6. Circadian rhythm

The bone absorption marker C-terminal telopeptide of type I collagen, the bone mineralization marker (produced by osteoblasts and osteocalcin), and the phosphate metabolic regulator FGF-23 secreted by osteoblasts are well-known to exhibit a circadian rhythm.191, 192, 193 These three proteins increased overnight, reaching their peak in the morning and their lowest levels in the late afternoon.193,194 In addition, nearly half of the genes in the mouse genome oscillate with the circadian rhythm in the body.195 Importantly, there is an inevitable relationship between life rhythms and bone remodeling. Daytime exercise schedule affects the physiology and rhythmicity of gene expression in the adrenal gland, liver, and heart.196 A recent experimental study confirmed that circadian rhythms can affect bone mechano-responsiveness and gene expression characteristics.169,197 Loading at zeitgeber time (ZT) 14 resulted in larger endocortical bone formation than that at ZT 2.197

4.7. Other factors

The adaptive response of the bone to loading is affected by other factors, such as the intake time of food and fat content. A correlation between the time of food intake and the adaptive response of the bone to mechanical loading has been reported.140 To study whether obesity affects the bone response to loading, Eller et al. induced the same level of tibial strain in high-fat diet (HFD)- and normal diet (ND)-fed mice.198 The bones of HFD and ND mice responded similarly to loading, suggesting that HFD minimally impacted bone mechanoadaptation. In addition, Lagerquist et al. induced adipocyte apoptosis in male mice using the AP20187 dimer and found that acute reduction of fat did not affect bone mass in the short term.199

5. Cellular regulation of relationships between mechanical signals and bone adaptation

5.1. The process of bone mechanoadaptation

Bone adaptation to loading involves mechanotransduction at multiple scales,200 allowing bones to modify their shape and internal structure according to changes in the external mechanical environment to provide maximum strength with minimal mass (Fig. 7). Specifically, mechanotransduction in bone must include four consecutive phases:201,202 (1) mechanocoupling, the transduction of mechanical force applied to the bone into a local mechanical signal perceived by a sensor cell (e.g., osteocytes); (2) biochemical coupling, the transduction of a local mechanical signal into biochemical signals and, ultimately, gene expression; (3) osteocyte regulation, signal transmission from mechanosensor cells to effector cells (i.e., osteoblasts and osteoclasts); and (4) the effector cell response, bone formation and resorption executed by osteoblasts and osteoclasts, respectively.

Fig. 7.

Fig. 7

The process of bone adaptation to mechanical loading. Apparent-level mechanical forces (a) produce a micromechanical environment (e.g., interstitial fluid flow) for mechanosensitive cells (osteocytes) in bone (b). Osteocytes sense micromechanical signals and produce biochemical signals (c), which regulate the functions of osteoblasts and osteoclasts. Bone formation and resorption executed by osteoblasts and osteoclasts (d), respectively, leading to altered mass and morphology of the bone (e).

5.2. Mechanosensitive cells and mechanoreceptors

Bone cells include osteoblasts, osteoclasts, osteocytes, and their progenitors, all of which can more or less respond to mechanical stimuli.184,200 Osteocytes, comprising over 90–95 ​% of all bone cells, are widely accepted as primary mechano-sensing cells within the bone.203 Additionally, osteocytes play a critical role in regulating osteoblasts and osteoclasts.200,204 When bones are subjected to external mechanical stimuli, osteocytes can work in conjunction by signaling osteoclasts and osteoblasts to optimize bone mass and structure.201

Osteocytes are embedded within the mineralized bone matrix, their cell bodies are housed in lacunae, and their cell processes are located in narrow canals, the canaliculi. This system, comprising both lacunae and canaliculi, is termed the osteocyte lacunar-canalicular system (LCS) and serves as the central functional unit for the transduction of apparent-level mechanical forces into the cellular mechanical microenvironment (e.g., fluid flow and shear stress) of osteocytes205 (Fig. 7b). Mmechanoreceptors in osteocytes include focal adhesions, gap junctions, primary cilium, cell cytoskeleton, ion channels (such as voltage-sensitive calcium channels, ionotropic channels, and mechano-sensitive channels), peri-cellular matrix in the lacunar region, and collagen hillocks in the canalicular region206,207 (Fig. 8).

Fig. 8.

Fig. 8

Mechanical loading (e.g., bending forces) produces interstitial fluid flow within the lacunar-canalicular system (LCS), which is sensed by mechanoreceptors of osteocytes. The figure was adapted and modified from.206

5.3. Mechanical microenvironments of osteocytes

Osteocytes can respond to cellular mechanical stimuli, including matrix deformation, fluid flow-induced fluid shear stress, hydrostatic pressure, streaming potentials, and the drag force of tether fibers.208 However, several experimental and numerical studies have shown that interstitial fluid flow is the primary mechanical stimulator of osteocytes.208, 209, 210, 211 When a long bone is loaded, pressure gradients are created throughout the bone tissue and drive fluid flow through the LCS, generating shear stress or drag forces on the osteocytes.212,213 Various mechanoreceptors in osteocytes can sense extracellular mechanical signals and transduce them into biochemical signals, which require responsive gene expression to regulate the behavior of osteoblasts and osteoclasts.214 Moreover, load-induced fluid flow may affect the solute transport of signaling molecules (e.g., such as nitric oxide, prostaglandin E2, and adenosine triphosphate) between osteocytes and effector cells.215

5.4. Effects of different loading parameters on the mechanical microenvironment of osteocytes

In vivo experiments provided direct evidence of bone cell responses to loading, revealing that the number of responsive osteocytes increased strongly with increasing strain magnitude216 (Fig. 9a). However, as loading continued, the number of responsive cells gradually decreased, and even those that remained responsive displayed smaller spikes in intracellular calcium ([Ca2+]i)217 (Fig. 9b). Moreover, in vitro experiments showed that the insertion of rest intervals may recover cell sensitivity and substantially increase the Ca2+ transient218,219 (Fig. 9c).

Fig. 9.

Fig. 9

The effect of different mechanical signals on the response of bone cells. (a) The percentage of responding osteocytes as a function of applied strain magnitude (adapted from 216). (b) [Ca2+]i responses of MLO-Y4 cells under steady and oscillatory loading (adapted from 217). (c) Insertion of rest (e.g.,10 and 15 ​s) into the loading profile results in higher peak response magnitudes of Ca2+ (adapted from 219).

Other studies have utilized mathematical modeling to examine the effects of various loading parameters on fluid dynamics in the LCS. Wu et al. found that the fluid flow rate and shear stress within the canaliculi of a loaded osteon were proportional to the strain magnitude and frequency.129 Kumar et al. established a new mathematical model of an LCS with curved canalicular walls, revealing that the peak flow velocity increased with increasing loading frequency. As the number of load cycles increased, the canalicular flow velocity was maximal during the first load cycle and reached steady-state levels after the 4th load cycle of the regimen.220 These numerical results were generally consistent with those observed in in vivo animal loading experiments.

More recently, some studies have developed multiscale models to explore the effects of different loading parameters on fluid dynamics in the porous structures of bones (such as the LCS and trabecular-lacunar cavities)221, 222, 223, 224, 225, 226 (Fig. 10). Fan et al. found that increasing the magnitude of the applied load enhanced the fluid flow within the LCS.213 Similarly, the fluid shear stress on osteocytes showed a loading-frequency-dependent phenomenon, and the fluid shear stress in the trabecular pores exhibited a linear increase with the loading frequency.224,227 Wang et al. established a multiscale model of “whole bone-single osteocyte LCS” to examine the interactive effects of various loading parameters on fluid dynamics around the osteocytes (Fig. 10a and b). The authors demonstrated that either the strain magnitude or rate was the main factor affecting the flow velocity and shear stress, and distinct loading parameters had highly interactive effects.145 These results are consistent with the quantitative relationships between mechanical signals and bone responses identified in animal loading studies, suggesting that fluid dynamics within the LCS may provide a new pathway, other than tissue-level strain, to decode the complex relationships between different mechanical signals and bone adaptive responses.

Fig. 10.

Fig. 10

The effects of various loading parameters on the fluid dynamics around osteocytes (adapted from 145,224). (a) The whole-bone finite element model of the tibia. (b) A three-dimensional model of the osteocyte lacunar-canalicular system (LCS) created from confocal images. (c) Pareto chart for the fluid velocity and shear stress within the inlet canaliculi. (d) Finite element model of trabecular bone cube. (e) Mean fluid shear stress on osteocyte processes (left) and osteocyte surface (right).

6. Summary and future perspectives

Bone adaptation to mechanical loading has long been recognized and elaborated upon by Julius Wolff in his book The Law of Bone Remodeling.228 Furthermore, “The Mechanostat” theory by Frost suggests that strain is the primary mechanical stimulus governing bone adaptation.229 However, in vivo animal loading experiments revealed diverse bone responses to different loading parameters, even when the strain was maintained at the same magnitude. The precise relationship between mechanical stimuli and bone adaptation is complex and remains elusive. By summarizing the outcomes of relevant in vivo animal loading studies, we attempted to identify any known quantitative relationships between the loading parameters and bone responses to provide a better understanding of bone mechanoadaptation (Fig. 6). Based on these quantitative relationships, a general mathematical model of bone adaptation as a function of different loading waveform parameters has been proposed (Fig. 11).

Fig. 11.

Fig. 11

Bone adaptative responses (y) as functions of various loading parameters (x1-x5), when other parameters are constant. y represents the bone adaptive changes to loading. x1, x2, x3, x4, and x5 represent the strain magnitude, loading frequency, strain rate, number of load cycles, and rest insertion, respectively.

The relationships between the individual loading parameters (except for the rest of the insertion) and bone responses are evident (Fig. 6). However, the effects of two or more loading parameters on bone adaptation remain largely unknown. A simple law may explain the complex phenomenon of bone adaptation to various mechanical signals. The Fourier transform can be used to generalize the strain stimulus of any periodic waveform,87 as reported by Turner [Equation (5)]. However, this equation has certain limitations because it does not account for interactions between the strain stimulus, number of load cycles, and rest insertion. Inspired by Turner's viewpoint and the method of incorporating the influence of cycle number,87 we further accounted for the effect of rest insertion into the model. A combination of Equations (4), (5) with the function f(x5) yields a general formula to describe the bone adaptive responses as a function of various loading parameters:

y=k1logd0+x4fx5∑i=1nx1ix2i (7)

where x1 represents the peak strain, x2 represents the loading frequency, x4 represents the number of load cycles per day, x5 represents the inserted rest, n represents the number of significant frequency components, d0 represents a coefficient, and k1 represents the proportionality coefficient.

However, the relationships between mechanical signals and bone adaptation have mostly been identified based on in vivo animal loading experiments, while their underlying mechanism remains unknown and cannot be explained by classic theories such as The Mechanostat theory. Interestingly, recent studies have provided new insights into how mechanical stimuli influence bone adaptation through numerical simulations230, 231, 232, 233, 234 and have attempted to employ neural network models to establish empirical relationships between loading parameters and bone responses (e.g., mineral apposition rate).235,236

Given that tissue-level strain cannot explain all experimental observations and bone adaptation is executed by bone cells, new mechanistic insights may be offered at the cellular level. Osteocytes sense the mechanical stimuli and regulate bone formation and resorption. The bone response may be directly related to the intensity of the mechanical microenvironment of osteocytes. The LCS is a remarkable structure that transforms and normalizes different forms of apparent-level mechanical signals into the same form of fluid flow for osteocytes within the LCS. Thus, different individual loading parameters or their combinations are reflected by the altered intensity of the fluid dynamics (e.g., flow velocity and shear stress) within the LCS. For example, changes in the loading frequency or rate can lead to increases in the flow velocity in the LCS. This could provide a new pathway for elucidating the complex relationships between different mechanical signals and bone adaptation. Indeed, fluid dynamics analyses of the LCS have explained several experimental observations regarding bone adaptations induced by different mechanical signals.129,220, 225 Additionally, the morphology of the LCS is altered by pathophysiological factors such as aging, estrogen deficiency, and disuse, leading to changes in the mechanical microenvironment within the LCS and ultimately affecting bone mechanoadaptation.226 This may also explain why and how bone mechanoadaptation is altered by pathophysiological factors. Taken together, the complex relationship between mechanical signals and bone adaptation can be simplified from the perspective of a cellular mechanical microenvironment. Despite existing multiscale computational models prohips.viding notable insights into the relationship between mechanical signals and bone adaptatio,129,142,145,237 further mechanistic studies are needed to elucidate these relations.

Although bone is mechanical adaptive, not all forms of exercise are equally effective at eliciting an osteogenic response. This review describes the in vivo animal loading experiments and provides deeper insights into the relationship between mechanical signals and adaptive bone responses. This study may offer theoretical guidance for optimizing exercise regimens, rehabilitation strategies, and the design of medical devices to promote bone health and treat osteoporosis. This is consistent with recent studies showing that high-frequency training is beneficial for increasing bone mineral density, and tailored whole-body vibration therapies have been proven effective in improving bone density.238,239 Additionally, Equation (7) can be used within physiological ranges to identify the optimal mechanical stimuli for maximizing bone health, thereby guiding the design of exercise regimens and medical devices. Future research could incorporate human exercise studies to further validate and apply this formula and determine the effectiveness of various exercise modalities and training doses for more targeted interventions to enhance bone health, particularly in preventing osteoporosis.

CRediT authorship contribution statement

Chenlu Wang: Writing – original draft, Investigation, Data curation. Ruisen Fu: Validation, Investigation. Haisheng Yang: Writing – review & editing, Conceptualization.

Ethical approval

This study does not contain any studies with human or animal subjects performed by any of the authors.

Declaration of competing interest

The authors have no conflict of interest.

Acknowledgements

This study was supported by National Natural Science Foundation of China [12272017] and Beijing Natural Science Foundation [L232058]. We thank Rakesh kumar and Russell P. Main for their valuable comments and edits.

Footnotes

This article is part of a special issue entitled: Bone Mechanobiology published in Mechanobiology in Medicine.

Appendix.

1. Experimental data for regression analysis

No. Strain magnitude (με) rMAR (μm/day) Endosteum/periosteum surfac Loading form Animal model Reference
1 701 0.03 Endosteum Four point bending Rat tibia Turner et al.240
711 −0.17
975 0.35
1295 1.47
1688 2.32
2 0 0.02 Periosteum Four point bending Rat tibia Turner et al.240
1404 0.54
1484 0.52
3 1200 −0.23 Endosteum Axial compression Rat ulna Hsieh et al.241
2200 0.04
3000 0.09
4 1200 −0.09 Periosteum Axial compression Rat ulna Hsieh et al.241
2200 0.53
3000 1.18
5 1469 0 Periosteum Axial compression Mice tibia Yang et al.242
2183 0.21
2939 0.9
6
1469 0.05 Endosteum
Axial compression
Mice tibia
Yang et al.242
2183 0.34
2939
0.87
No. Loading frequency (Hz) rBFR/BS (μm3/μm2/year) Endosteum/periosteum surfac Loading form Animal model Reference

1 0.05 −83.51 Endosteum Four point bending Rat tibia Turner et al.243
0.1 40.93
0.2 −12.08
0.5 131.25
1 140.958
2 183.63
2 1 60.5 Periosteum Axial compression Mice ulnar Warden et al.244
5 112.4
10 167
3 5 4.87 Endosteum Knee loading Mice tibia Zhang et al.245
10 3.60
15 2.84
4 5 13.51 Periosteum Knee loading Mice tibia Zhang et al.245
10 9.52
15 3.83
5 5 1.82 Endosteum Knee loading Mice femurr Zhang et al.245
10 2.54
15 2.81
6
5 1.93 Periosteum
Knee loading
Mice femur
Zhang et al.245
10 5.58
15
6.90
No. Strain rate (sec−1) rMAR (μm/day) Endosteum/periosteum surfac Loading form Animal model Reference

1 0 0.16 Endosteum Four point bending Rat tibia Turner et al.246
0.013 0.61
0.026 0.64
0.039 1.30
2
0.004 0.68 Periosteum
Cantilever bending
Mice tibia
LaMothe et al.247
0.02 0.60
0.1
1.25
No. Number of load cycles Percent of control (%) Parameters Loading form Animal model Reference

1 40 −10 BFR Four point bending Rat tibia Cullen et al.248
120 25
400 39
2 36 9 Ct.Ar Axial compression Mice tibia Yang et al.40
216 13
1200 15
3 4 3 Bone mass Trained to jump Rat tibia Umemura et al.46
36 33
360 34
1800 43
4 5 9.6 Bone mineral content Isolated ulna Rooster ulna Rubin et al.55
10 11.15
20 14.23
40 17.3
100 22.7

2. Regression analysis methods

Curve estimation regression analyses were conducted to assess the correlations between mechanical loading parameters (e.g., strain magnitude, loading frequency, strain rate, and number of load cycles) and bone adaptive changes to loading (e.g., rMAR, rBFR/BS, Ct.Ar, ect.). Here, linear, logarithmic, exponential, and power regression models were tested and an optimal regression model was selected for each mechanical loading parameter when the greatest determination coefficient (R2) was achieved. The curve estimation regression analyses were performed with SPSS (SPSS 25.0, IBM Inc., Chicago, USA) and curve fitting was done with GraphPad Prism 6 (GraphPad, Inc., San Diego, CA, USA).

References

  • 1.Qiao Y., Wang Y., Zhou Y., et al. The role of nervous system in adaptive response of bone to mechanical loading. J Cell Physiol. 2019;234(6):7771–7780. doi: 10.1002/jcp.27683. [DOI] [PubMed] [Google Scholar]
  • 2.Frost H.M. Skeletal structural adaptations to mechanical usage (SATMU): 1. Redefining Wolff's law: the bone modeling problem. Anat Rec. 1990;226(4):403–413. doi: 10.1002/ar.1092260402. [DOI] [PubMed] [Google Scholar]
  • 3.Baron R., Kneissel M. WNT signaling in bone homeostasis and disease: from human mutations to treatments. Nat Med. 2013;19(2):179–192. doi: 10.1038/nm.3074. [DOI] [PubMed] [Google Scholar]
  • 4.Frost H.M. Skeletal structural adaptations to mechanical usage (SATMU): 2. Redefining Wolff's law: the remodeling problem. Anat Rec. 1990;226(4):414–422. doi: 10.1002/ar.1092260403. [DOI] [PubMed] [Google Scholar]
  • 5.Xie H., Cui Z., Wang L., et al. PDGF-BB secreted by preosteoclasts induces angiogenesis during coupling with osteogenesis. Nat Med. 2014;20(11):1270–1278. doi: 10.1038/nm.3668. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 6.Tang Y., Wu X., Lei W., et al. TGF-beta1-induced migration of bone mesenchymal stem cells couples bone resorption with formation. Nat Med. 2009;15(7):757–765. doi: 10.1038/nm.1979. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 7.Katsimbri P. The biology of normal bone remodelling. Eur J Cancer Care. 2017;26(6) doi: 10.1111/ecc.12740. [DOI] [PubMed] [Google Scholar]
  • 8.Garrett-Bakelman F.E., Darshi M., Green S.J., et al. The NASA Twins Study: a multidimensional analysis of a year-long human spaceflight. Science. 2019;364(6436) doi: 10.1126/science.aau8650. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 9.Rolvien T., Milovanovic P., Schmidt F.N., et al. Long-term immobilization in elderly females causes a specific pattern of cortical bone and osteocyte deterioration different from postmenopausal osteoporosis. J Bone Min Res. 2020;35(7):1343–1351. doi: 10.1002/jbmr.3970. [DOI] [PubMed] [Google Scholar]
  • 10.Cunningham H.C., West D.W.D., Baehr L.M., et al. Age-dependent bone loss and recovery during hindlimb unloading and subsequent reloading in rats. BMC Muscoskelet Disord. 2018;19(1):223. doi: 10.1186/s12891-018-2156-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Warden S.J., Mantila Roosa S.M., Kersh M.E., et al. Physical activity when young provides lifelong benefits to cortical bone size and strength in men. Proc Natl Acad Sci U S A. 2014;111(14):5337–5342. doi: 10.1073/pnas.1321605111. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12.Tu X., Delgado-Calle J., Condon K.W., et al. Osteocytes mediate the anabolic actions of canonical Wnt/β-catenin signaling in bone. Proc Natl Acad Sci USA. 2015;112(5):E478–E486. doi: 10.1073/pnas.1409857112. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 13.Ascenzi A. Biomechanics and Galileo galilei. J Biomech. 1993;26(2):95–100. doi: 10.1016/0021-9290(93)90040-l. [DOI] [PubMed] [Google Scholar]
  • 14.Galileo G. University of Wisconsin Press; 1938. Discorsi e dimonstrazioni matematiche, intorno a due nuove scienze attentanti alla meccanica ed a muovementi localli [M] [Google Scholar]
  • 15.Skedros J.G., Brand R.A. Biographical sketch: Georg Hermann von Meyer (1815-1892) Clin Orthop Relat Res. 2011;469(11):3072–3076. doi: 10.1007/s11999-011-2040-6. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 16.Skedros J.G., Baucom S.L. Mathematical analysis of trabecular 'trajectories' in apparent trajectorial structures: the unfortunate historical emphasis on the human proximal femur. J Theor Biol. 2007;244(1):15–45. doi: 10.1016/j.jtbi.2006.06.029. [DOI] [PubMed] [Google Scholar]
  • 17.Roesler H. The history of some fundamental concepts in bone biomechanics. J Biomech. 1987;20(11–12):1025–1034. doi: 10.1016/0021-9290(87)90020-0. [DOI] [PubMed] [Google Scholar]
  • 18.Cowin S.C. Wolff's law of trabecular architecture at remodeling equilibrium. J Biomech Eng. 1986;108(1):83–88. doi: 10.1115/1.3138584. [DOI] [PubMed] [Google Scholar]
  • 19.Wolff J., Gesetz der Das. Transformation der Knochen. DMW (Dtsch Med Wochenschr) 2024;19:1222–1224. [Google Scholar]
  • 20.Epker B.N., Frost H.M. Correlation of bone resorption and formation with the physical behavior of loaded bone. J Dent Res. 1965;44:33–41. doi: 10.1177/00220345650440012801. [DOI] [PubMed] [Google Scholar]
  • 21.Martin R.B., Burr D.B., Sharkey N.A. Springer; 2024. Skeletal Tissue mechanics[M] [Google Scholar]
  • 22.Robling A.G., Daly R., Fuchs R.K., et al. Chapter 11 - Mechanical Adaptation [M] Burr D.B., Allen M.R. second ed. Academic Press; 2019. Basic and Applied Bone Biology; pp. 203–233. [Google Scholar]
  • 23.Frost H.M. Bone "mass" and the "mechanostat": a proposal. Anat Rec. 1987;219(1):1–9. doi: 10.1002/ar.1092190104. [DOI] [PubMed] [Google Scholar]
  • 24.Frost H.M. From Wolff's law to the Utah paradigm: insights about bone physiology and its clinical applications. Anat Rec. 2001;262(4):398–419. doi: 10.1002/ar.1049. [DOI] [PubMed] [Google Scholar]
  • 25.Frost H.M. On the pathogenesis of osteogenesis imperfecta: some insights of the Utah paradigm of skeletal physiology. J Musculoskelet Neuronal Interact. 2003;3(1):1–7. [PubMed] [Google Scholar]
  • 26.Rubin C.T., Lanyon L.E. Regulation of bone mass by mechanical strain magnitude. Calcif Tissue Int. 1985;37(4):411–417. doi: 10.1007/bf02553711. [DOI] [PubMed] [Google Scholar]
  • 27.Turner C.H., Forwood M.R., Rho J.Y., et al. Mechanical loading thresholds for lamellar and woven bone formation. J Bone Min Res. 1994;9(1):87–97. doi: 10.1002/jbmr.5650090113. [DOI] [PubMed] [Google Scholar]
  • 28.Currey J.D. Mechanical properties of bone tissues with greatly differing functions. J Biomech. 1979;12(4):313–319. doi: 10.1016/0021-9290(79)90073-3. [DOI] [PubMed] [Google Scholar]
  • 29.Currey J.D. Bone architecture and fracture. Curr Osteoporos Rep. 2005;3(2):52–56. doi: 10.1007/s11914-005-0004-z. [DOI] [PubMed] [Google Scholar]
  • 30.Meng X., Qin Q., Qu C. Tensile and compressive strain evolutions of bovine compact bone under four-point bending fatigue loading. J Mech Behav Biomed Mater. 2021;123 doi: 10.1016/j.jmbbm.2021.104774. [DOI] [PubMed] [Google Scholar]
  • 31.Javaheri B., Razi H., Gohin S., et al. Lasting organ-level bone mechanoadaptation is unrelated to local strain. Sci Adv. 2020;6(10):eaax8301. doi: 10.1126/sciadv.aax8301. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32.Monzem S., Javaheri B., de Souza R.L., et al. Sciatic neurectomy-related cortical bone loss exhibits delayed onset yet stabilises more rapidly than trabecular bone. BoneKEy Rep. 2021;15 doi: 10.1016/j.bonr.2021.101116. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 33.Ko F.C., Mortreux M., Riveros D., et al. Dose-dependent skeletal deficits due to varied reductions in mechanical loading in rats. NPJ Microgravity. 2020;6:15. doi: 10.1038/s41526-020-0105-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 34.Krause A.R., Speacht T.A., Steiner J.L., et al. Mechanical loading recovers bone but not muscle lost during unloading. NPJ Microgravity. 2020;6(1):36. doi: 10.1038/s41526-020-00126-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 35.Lanyon L.E., Smith R.N. Measurements of bone strain in the walking animal. Res Vet Sci. 1969;10(1):93–94. [PubMed] [Google Scholar]
  • 36.Lanyon L.E., Hampson W.G., Goodship A.E., et al. Bone deformation recorded in vivo from strain gauges attached to the human tibial shaft. Acta Orthop Scand. 1975;46(2):256–268. doi: 10.3109/17453677508989216. [DOI] [PubMed] [Google Scholar]
  • 37.Turner C.H., Takano Y., Owan I. Aging changes mechanical loading thresholds for bone formation in rats. J Bone Min Res. 1995;10(10):1544–1549. doi: 10.1002/jbmr.5650101016. [DOI] [PubMed] [Google Scholar]
  • 38.Turner C.H., Owan I., Takano Y. Mechanotransduction in bone: role of strain rate. Am J Physiol. 1995;269(3 Pt 1):E438–E442. doi: 10.1152/ajpendo.1995.269.3.E438. [DOI] [PubMed] [Google Scholar]
  • 39.Robling A.G., Duijvelaar K.M., Geevers J.V., et al. Modulation of appositional and longitudinal bone growth in the rat ulna by applied static and dynamic force. Bone. 2001;29(2):105–113. doi: 10.1016/s8756-3282(01)00488-4. [DOI] [PubMed] [Google Scholar]
  • 40.Yang H., Embry R.E., Main R.P. Effects of loading duration and short rest insertion on cancellous and cortical bone adaptation in the mouse tibia. PLoS One. 2017;12(1) doi: 10.1371/journal.pone.0169519. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 41.Warden S.J., Turner C.H. Mechanotransduction in the cortical bone is most efficient at loading frequencies of 5-10 Hz. Bone. 2004;34(2):261–270. doi: 10.1016/j.bone.2003.11.011. [DOI] [PubMed] [Google Scholar]
  • 42.Berman A.G., Hinton M.J., Wallace J.M. Treadmill running and targeted tibial loading differentially improve bone mass in mice. BoneKEy Rep. 2019;10 doi: 10.1016/j.bonr.2019.100195. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 43.Li Z., Liu S.Y., Xu L., et al. Effects of treadmill running with different intensity on rat subchondral bone. Sci Rep. 2017;7(1):1977. doi: 10.1038/s41598-017-02126-z. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 44.Ju Y.I., Choi H.J., Ohnaru K., et al. Differential effects of jump versus running exercise on trabecular bone architecture and strength in rats. Phys Act Nutr. 2020;24(1):1–8. doi: 10.20463/pan.2020.0001. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 45.Kang Y.S., Kim J.C., Kim J.S., et al. Effects of swimming exercise on serum Irisin and bone FNDC5 in rat models of high-fat diet-induced osteoporosis. J Sports Sci Med. 2019;18(4):596–603. [PMC free article] [PubMed] [Google Scholar]
  • 46.Umemura Y., Ishiko T., Tsujimoto H., et al. Effects of jump training on bone hypertrophy in young and old rats. Int J Sports Med. 1995;16(6):364–367. doi: 10.1055/s-2007-973021. [DOI] [PubMed] [Google Scholar]
  • 47.Loitz B.J., Zernicke R.F. Strenuous exercise-induced remodelling of mature bone: relationships between in vivo strains and bone mechanics. J Exp Biol. 1992;170:1–18. doi: 10.1242/jeb.170.1.1. [DOI] [PubMed] [Google Scholar]
  • 48.Konieczynski D.D., Truty M.J., Biewener A.A. Evaluation of a bone's in vivo 24-hour loading history for physical exercise compared with background loading. J Orthop Res. 1998;16(1):29–37. doi: 10.1002/jor.1100160106. [DOI] [PubMed] [Google Scholar]
  • 49.Sugiyama T., Price J.S., Lanyon L.E. Functional adaptation to mechanical loading in both cortical and cancellous bone is controlled locally and is confined to the loaded bones. Bone. 2010;46(2):314–321. doi: 10.1016/j.bone.2009.08.054. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 50.Hert J., Lisková M., Landa J. Reaction of bone to mechanical stimuli. 1. Continuous and intermittent loading of tibia in rabbit. Folia Morphol. 1971;19(3):290–300. [PubMed] [Google Scholar]
  • 51.Churches A.E., Howlett C.R. Functional adaptation of bone in response to sinusoidally varying controlled compressive loading of the ovine metacarpus. Clin Orthop Relat Res. 1982;(168):265–280. [PubMed] [Google Scholar]
  • 52.O'Connor J.A., Lanyon L.E., MacFie H. The influence of strain rate on adaptive bone remodelling. J Biomech. 1982;15(10):767–781. doi: 10.1016/0021-9290(82)90092-6. [DOI] [PubMed] [Google Scholar]
  • 53.Chamay A., Tschantz P. Mechanical influences in bone remodeling. Experimental research on Wolff's law. J Biomech. 1972;5(2):173–180. doi: 10.1016/0021-9290(72)90053-x. [DOI] [PubMed] [Google Scholar]
  • 54.Rubin C.T., Lanyon L.E. Kappa Delta Award paper. Osteoregulatory nature of mechanical stimuli: function as a determinant for adaptive remodeling in bone. J Orthop Res. 1987;5(2):300–310. doi: 10.1002/jor.1100050217. [DOI] [PubMed] [Google Scholar]
  • 55.Rubin C.T., Lanyon L.E. Regulation of bone formation by applied dynamic loads. J Bone Joint Surg Am. 1984;66(3):397–402. [PubMed] [Google Scholar]
  • 56.Chambers T.J., Evans M., Gardner T.N., et al. Induction of bone formation in rat tail vertebrae by mechanical loading. Bone Min. 1993;20(2):167–178. doi: 10.1016/s0169-6009(08)80025-6. [DOI] [PubMed] [Google Scholar]
  • 57.Kim C.H., Takai E., Zhou H., et al. Trabecular bone response to mechanical and parathyroid hormone stimulation: the role of mechanical microenvironment. J Bone Min Res. 2003;18(12):2116–2125. doi: 10.1359/jbmr.2003.18.12.2116. [DOI] [PubMed] [Google Scholar]
  • 58.Webster D., Wasserman E., Ehrbar M., et al. Mechanical loading of mouse caudal vertebrae increases trabecular and cortical bone mass-dependence on dose and genotype. Biomech Model Mechanobiol. 2010;9(6):737–747. doi: 10.1007/s10237-010-0210-1. [DOI] [PubMed] [Google Scholar]
  • 59.Schulte F.A., Ruffoni D., Lambers F.M., et al. Local mechanical stimuli regulate bone formation and resorption in mice at the tissue level. PLoS One. 2013;8(4) doi: 10.1371/journal.pone.0062172. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 60.Lambers F.M., Schulte F.A., Kuhn G., et al. Mouse tail vertebrae adapt to cyclic mechanical loading by increasing bone formation rate and decreasing bone resorption rate as shown by time-lapsed in vivo imaging of dynamic bone morphometry. Bone. 2011;49(6):1340–1350. doi: 10.1016/j.bone.2011.08.035. [DOI] [PubMed] [Google Scholar]
  • 61.Schulte F.A., Lambers F.M., Kuhn G., et al. In vivo micro-computed tomography allows direct three-dimensional quantification of both bone formation and bone resorption parameters using time-lapsed imaging. Bone. 2011;48(3):433–442. doi: 10.1016/j.bone.2010.10.007. [DOI] [PubMed] [Google Scholar]
  • 62.Turner C.H., Akhter M.P., Raab D.M., et al. A noninvasive, in vivo model for studying strain adaptive bone modeling. Bone. 1991;12(2):73–79. doi: 10.1016/8756-3282(91)90003-2. [DOI] [PubMed] [Google Scholar]
  • 63.Forwood M.R., Bennett M.B., Blowers A.R., et al. Modification of the in vivo four-point loading model for studying mechanically induced bone adaptation. Bone. 1998;23(3):307–310. doi: 10.1016/s8756-3282(98)00090-8. [DOI] [PubMed] [Google Scholar]
  • 64.Akhter M.P., Cullen D.M., Pedersen E.A., et al. Bone response to in vivo mechanical loading in two breeds of mice. Calcif Tissue Int. 1998;63(5):442–449. doi: 10.1007/s002239900554. [DOI] [PubMed] [Google Scholar]
  • 65.Silva M.J., Brodt M.D. Mechanical stimulation of bone formation is normal in the SAMP6 mouse. Calcif Tissue Int. 2008;82(6):489–497. doi: 10.1007/s00223-008-9142-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 66.Silva M.J., Brodt M.D., Hucker W.J. Finite element analysis of the mouse tibia: estimating endocortical strain during three-point bending in SAMP6 osteoporotic mice. Anat Rec A Discov Mol Cell Evol Biol. 2005;283(2):380–390. doi: 10.1002/ar.a.20171. [DOI] [PubMed] [Google Scholar]
  • 67.Gross T.S., Srinivasan S., Liu C.C., et al. Noninvasive loading of the murine tibia: an in vivo model for the study of mechanotransduction. J Bone Min Res. 2002;17(3):493–501. doi: 10.1359/jbmr.2002.17.3.493. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 68.McBride S.H., Silva M.J. Adaptive and injury response of bone to mechanical loading. Bonekey Osteovision. 2012;1 doi: 10.1038/bonekey.2012.192. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 69.Torrance A.G., Mosley J.R., Suswillo R.F., et al. Noninvasive loading of the rat ulna in vivo induces a strain-related modeling response uncomplicated by trauma or periostal pressure. Calcif Tissue Int. 1994;54(3):241–247. doi: 10.1007/bf00301686. [DOI] [PubMed] [Google Scholar]
  • 70.Lee K.C., Maxwell A., Lanyon L.E. Validation of a technique for studying functional adaptation of the mouse ulna in response to mechanical loading. Bone. 2002;31(3):407–412. doi: 10.1016/s8756-3282(02)00842-6. [DOI] [PubMed] [Google Scholar]
  • 71.Baumann A.P., Aref M.W., Turnbull T.L., et al. Development of an in vivo rabbit ulnar loading model. Bone. 2015;75:55–61. doi: 10.1016/j.bone.2015.01.022. [DOI] [PubMed] [Google Scholar]
  • 72.Torcasio A., Zhang X., Duyck J., et al. 3D characterization of bone strains in the rat tibia loading model. Biomech Model Mechanobiol. 2012;11(3–4):403–410. doi: 10.1007/s10237-011-0320-4. [DOI] [PubMed] [Google Scholar]
  • 73.Ziemian S.N., Ayobami O.O., Rooney A.M., et al. Low bone mass resulting from impaired estrogen signaling in bone increases severity of load-induced osteoarthritis in female mice. Bone. 2021;152 doi: 10.1016/j.bone.2021.116071. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 74.Yang H., Bullock W.A., Myhal A., et al. Cancellous bone may have a greater adaptive strain threshold than cortical bone. JBMR Plus. 2021;5(5) doi: 10.1002/jbm4.10489. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 75.Robling A.G., Burr D.B., Turner C.H. Skeletal loading in animals. J Musculoskelet Neuronal Interact. 2001;1(3):249–262. [PubMed] [Google Scholar]
  • 76.De Souza R.L., Matsuura M., Eckstein F., et al. Non-invasive axial loading of mouse tibiae increases cortical bone formation and modifies trabecular organization: a new model to study cortical and cancellous compartments in a single loaded element. Bone. 2005;37(6):810–818. doi: 10.1016/j.bone.2005.07.022. [DOI] [PubMed] [Google Scholar]
  • 77.Kristianto J., Litscher S.J., Johnson M.G., et al. Congenic strains confirm the pleiotropic effect of chromosome 4 QTL on mouse femoral geometry and biomechanical performance. PLoS One. 2016;11(2) doi: 10.1371/journal.pone.0148571. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 78.Pflanz D., Birkhold A.I., Albiol L., et al. Sost deficiency led to a greater cortical bone formation response to mechanical loading and altered gene expression. Sci Rep. 2017;7(1):9435. doi: 10.1038/s41598-017-09653-9. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 79.Yang H., Büttner A., Albiol L., et al. Cortical bone adaptation to a moderate level of mechanical loading in male Sost deficient mice. Sci Rep. 2020;10(1) doi: 10.1038/s41598-020-79098-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 80.Albiol L., Büttner A., Pflanz D., et al. Effects of long-term sclerostin deficiency on trabecular bone mass and adaption to limb loading differ in male and female mice. Calcif Tissue Int. 2020;106(4):415–430. doi: 10.1007/s00223-019-00648-4. [DOI] [PubMed] [Google Scholar]
  • 81.Srinivasan S., Balsiger D., Huber P., et al. Static Preload inhibits loading-induced bone formation. JBMR Plus. 2019;3(5) doi: 10.1002/jbm4.10087. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 82.Tanaka S.M., Sun H.B., Yokota H. Bone formation induced by a novel form of mechanical loading on joint tissue. Biol Sci Space. 2004;18(2):41–44. doi: 10.2187/bss.18.41. [DOI] [PubMed] [Google Scholar]
  • 83.Yokota H., Tanaka S.M. Osteogenic potentials with joint-loading modality. J Bone Miner Metabol. 2005;23(4):302–308. doi: 10.1007/s00774-005-0603-x. [DOI] [PubMed] [Google Scholar]
  • 84.Zhang P., Tanaka S.M., Jiang H., et al. Diaphyseal bone formation in murine tibiae in response to knee loading. J Appl Physiol. 1985;100(5):1452–1459. doi: 10.1152/japplphysiol.00997.2005. 2006. [DOI] [PubMed] [Google Scholar]
  • 85.Birkhold A.I., Razi H., Duda G.N., et al. The periosteal bone surface is less mechano-responsive than the endocortical. Sci Rep. 2016;6 doi: 10.1038/srep23480. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 86.Ohashi N., Robling A.G., Burr D.B., et al. The effects of dynamic axial loading on the rat growth plate. J Bone Min Res. 2002;17(2):284–292. doi: 10.1359/jbmr.2002.17.2.284. [DOI] [PubMed] [Google Scholar]
  • 87.Turner C.H. Three rules for bone adaptation to mechanical stimuli. Bone. 1998;23(5):399–407. doi: 10.1016/s8756-3282(98)00118-5. [DOI] [PubMed] [Google Scholar]
  • 88.Main R.P., Shefelbine S.J., Meakin L.B., et al. Murine axial compression tibial loading model to study bone mechanobiology: implementing the model and reporting results. J Orthop Res. 2020;38(2):233–252. doi: 10.1002/jor.24466. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 89.Milgrom C., Voloshin A., Novack L., et al. In vivo strains at the middle and distal thirds of the tibia during exertional activities. BoneKEy Rep. 2022;16 doi: 10.1016/j.bonr.2022.101170. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 90.Milgrom C., Finestone A., Segev S., et al. Are overground or treadmill runners more likely to sustain tibial stress fracture? Br J Sports Med. 2003;37(2):160–163. doi: 10.1136/bjsm.37.2.160. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 91.Watanabe K., Mutsuzaki H., Fukaya T., et al. Development of a knee joint CT-FEM model in load response of the stance phase during walking using muscle exertion, motion analysis, and ground reaction force data. Medicina. 2020;56(2) doi: 10.3390/medicina56020056. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 92.Yan C., Bice R.J., Frame J.W., et al. Multidirectional basketball activities load different regions of the tibia: a subject-specific muscle-driven finite element study. Bone. 2022;159 doi: 10.1016/j.bone.2022.116392. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 93.Burr D.B., Milgrom C., Fyhrie D., et al. In vivo measurement of human tibial strains during vigorous activity. Bone. 1996;18(5):405–410. doi: 10.1016/8756-3282(96)00028-2. [DOI] [PubMed] [Google Scholar]
  • 94.Milgrom C., Finestone A., Levi Y., et al. Do high impact exercises produce higher tibial strains than running? Br J Sports Med. 2000;34(3):195–199. doi: 10.1136/bjsm.34.3.195. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 95.Hsieh Y.F., Robling A.G., Ambrosius W.T., et al. Mechanical loading of diaphyseal bone in vivo: the strain threshold for an osteogenic response varies with location. J Bone Min Res. 2001;16(12):2291–2297. doi: 10.1359/jbmr.2001.16.12.2291. [DOI] [PubMed] [Google Scholar]
  • 96.Sugiyama T., Meakin L.B., Browne W.J., et al. Bones' adaptive response to mechanical loading is essentially linear between the low strains associated with disuse and the high strains associated with the lamellar/woven bone transition. J Bone Min Res. 2012;27(8):1784–1793. doi: 10.1002/jbmr.1599. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 97.Berman A.G., Clauser C.A., Wunderlin C., et al. Structural and mechanical improvements to bone are strain dependent with axial compression of the tibia in female C57BL/6 mice. PLoS One. 2015;10(6) doi: 10.1371/journal.pone.0130504. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 98.Weatherholt A.M., Fuchs R.K., Warden S.J. Cortical and trabecular bone adaptation to incremental load magnitudes using the mouse tibial axial compression loading model. Bone. 2013;52(1):372–379. doi: 10.1016/j.bone.2012.10.026. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 99.Mosley J.R., March B.M., Lynch J., et al. Strain magnitude related changes in whole bone architecture in growing rats. Bone. 1997;20(3):191–198. doi: 10.1016/s8756-3282(96)00385-7. [DOI] [PubMed] [Google Scholar]
  • 100.Brodt M.D., Silva M.J. Aged mice have enhanced endocortical response and normal periosteal response compared with young-adult mice following 1 week of axial tibial compression. J Bone Min Res. 2010;25(9):2006–2015. doi: 10.1002/jbmr.96. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 101.Rubin C.T., McLeod K.J. Promotion of bony ingrowth by frequency-specific, low-amplitude mechanical strain. Clin Orthop Relat Res. 1994;(298):165–174. [PubMed] [Google Scholar]
  • 102.Hsieh Y.F., Turner C.H. Effects of loading frequency on mechanically induced bone formation. J Bone Min Res. 2001;16(5):918–924. doi: 10.1359/jbmr.2001.16.5.918. [DOI] [PubMed] [Google Scholar]
  • 103.Chen X.Y., Zhang X.Z., Guo Y., et al. The establishment of a mechanobiology model of bone and functional adaptation in response to mechanical loading. Clin Biomech. 2008;23(Suppl 1):S88–S95. doi: 10.1016/j.clinbiomech.2008.01.016. [DOI] [PubMed] [Google Scholar]
  • 104.Turner C.H., Forwood M.R., Otter M.W. Mechanotransduction in bone: do bone cells act as sensors of fluid flow? FASEB J. 1994;8(11):875–878. doi: 10.1096/fasebj.8.11.8070637. [DOI] [PubMed] [Google Scholar]
  • 105.Scheuren A.C., Vallaster P., Kuhn G.A., et al. Mechano-regulation of trabecular bone adaptation is controlled by the local in vivo environment and Logarithmically dependent on loading frequency. Front Bioeng Biotechnol. 2020;8 doi: 10.3389/fbioe.2020.566346. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 106.Mosley J.R., Lanyon L.E. Strain rate as a controlling influence on adaptive modeling in response to dynamic loading of the ulna in growing male rats. Bone. 1998;23(4):313–318. doi: 10.1016/s8756-3282(98)00113-6. [DOI] [PubMed] [Google Scholar]
  • 107.LaMothe J.M., Hamilton N.H., Zernicke R.F. Strain rate influences periosteal adaptation in mature bone. Med Eng Phys. 2005;27(4):277–284. doi: 10.1016/j.medengphy.2004.04.012. [DOI] [PubMed] [Google Scholar]
  • 108.Sun D., Brodt M.D., Zannit H.M., et al. Evaluation of loading parameters for murine axial tibial loading: stimulating cortical bone formation while reducing loading duration. J Orthop Res. 2018;36(2):682–691. doi: 10.1002/jor.23727. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 109.Umemura Y., Ishiko T., Yamauchi T., et al. Five jumps per day increase bone mass and breaking force in rats. J Bone Min Res. 1997;12(9):1480–1485. doi: 10.1359/jbmr.1997.12.9.1480. [DOI] [PubMed] [Google Scholar]
  • 110.Robling A.G., Burr D.B., Turner C.H. Partitioning a daily mechanical stimulus into discrete loading bouts improves the osteogenic response to loading. J Bone Min Res. 2000;15(8):1596–1602. doi: 10.1359/jbmr.2000.15.8.1596. [DOI] [PubMed] [Google Scholar]
  • 111.Srinivasan S., Weimer D.A., Agans S.C., et al. Low-magnitude mechanical loading becomes osteogenic when rest is inserted between each load cycle. J Bone Min Res. 2002;17(9):1613–1620. doi: 10.1359/jbmr.2002.17.9.1613. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 112.Srinivasan S., Agans S.C., King K.A., et al. Enabling bone formation in the aged skeleton via rest-inserted mechanical loading. Bone. 2003;33(6):946–955. doi: 10.1016/j.bone.2003.07.009. [DOI] [PubMed] [Google Scholar]
  • 113.Liu Z., Gao J., Gong H. The adaptive response of rat tibia to different levels of peak strain and durations of experiment. Med Eng Phys. 2022;102 doi: 10.1016/j.medengphy.2022.103785. [DOI] [PubMed] [Google Scholar]
  • 114.Qin Y.X., Rubin C.T., McLeod K.J. Nonlinear dependence of loading intensity and cycle number in the maintenance of bone mass and morphology. J Orthop Res. 1998;16(4):482–489. doi: 10.1002/jor.1100160414. [DOI] [PubMed] [Google Scholar]
  • 115.LaMothe J.M., Zernicke R.F. Rest insertion combined with high-frequency loading enhances osteogenesis. J Appl Physiol. 1985;96(5):1788–1793. doi: 10.1152/japplphysiol.01145.2003. 2004. [DOI] [PubMed] [Google Scholar]
  • 116.Srinivasan S., Ausk B.J., Bain S.D., et al. Rest intervals reduce the number of loading bouts required to enhance bone formation. Med Sci Sports Exerc. 2015;47(5):1095–1103. doi: 10.1249/mss.0000000000000509. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 117.Srinivasan S., Ausk B.J., Poliachik S.L., et al. Rest-inserted loading rapidly amplifies the response of bone to small increases in strain and load cycles. J Appl Physiol. 1985;102(5):1945–1952. doi: 10.1152/japplphysiol.00507.2006. 2007. [DOI] [PubMed] [Google Scholar]
  • 118.Horasan M., Verner K.A., Yang H., et al. Computationally derived endosteal strain and strain gradients correlate with increased bone formation in an axially loaded murine tibia model. J Mech Behav Biomed Mater. 2024;160 doi: 10.1016/j.jmbbm.2024.106761. [DOI] [PubMed] [Google Scholar]
  • 119.Carriero A., Javaheri B., Bassir Kazeruni N., et al. Age and sex differences in load-induced tibial cortical bone surface strain maps. JBMR Plus. 2021;5(3) doi: 10.1002/jbm4.10467. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 120.Mumtaz H., Lara-Castillo N., Scott J.M., et al. Age and gender related differences in load-strain response in C57Bl/6 mice. Aging (Albany NY) 2020;12(24):24721–24733. doi: 10.18632/aging.202350. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 121.Frost H.M. Bone's mechanostat: a 2003 update. Anat Rec A Discov Mol Cell Evol Biol. 2003;275(2):1081–1101. doi: 10.1002/ar.a.10119. [DOI] [PubMed] [Google Scholar]
  • 122.Akhter M.P., Raab D.M., Turner C.H., et al. Characterization of in vivo strain in the rat tibia during external application of a four-point bending load. J Biomech. 1992;25(10):1241–1246. doi: 10.1016/0021-9290(92)90082-c. [DOI] [PubMed] [Google Scholar]
  • 123.Robling A.G., Turner C.H. Mechanotransduction in bone: genetic effects on mechanosensitivity in mice. Bone. 2002;31(5):562–569. doi: 10.1016/s8756-3282(02)00871-2. [DOI] [PubMed] [Google Scholar]
  • 124.Lanyon L.E. Using functional loading to influence bone mass and architecture: objectives, mechanisms, and relationship with estrogen of the mechanically adaptive process in bone. Bone. 1996;18(1 Suppl):37s–43s. doi: 10.1016/8756-3282(95)00378-9. [DOI] [PubMed] [Google Scholar]
  • 125.Christen P., Ito K., Ellouz R., et al. Bone remodelling in humans is load-driven but not lazy. Nat Commun. 2014;5:4855. doi: 10.1038/ncomms5855. [DOI] [PubMed] [Google Scholar]
  • 126.Lad S.E., McGraw W.S., Daegling D.J. Haversian remodeling corresponds to load frequency but not strain magnitude in the macaque (Macaca fascicularis) skeleton. Bone. 2019;127:571–576. doi: 10.1016/j.bone.2019.07.027. [DOI] [PubMed] [Google Scholar]
  • 127.Zhang P., Tanaka S.M., Sun Q., et al. Frequency-dependent enhancement of bone formation in murine tibiae and femora with knee loading. J Bone Miner Metabol. 2007;25(6):383–391. doi: 10.1007/s00774-007-0774-8. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 128.Torcasio A., van Lenthe G.H., Van Oosterwyck H. The importance of loading frequency, rate and vibration for enhancing bone adaptation and implant osseointegration. Eur Cell Mater. 2008;16:56–68. [PubMed] [Google Scholar]
  • 129.Wu X., Wang N., Wang Z., et al. Mathematically modeling fluid flow and fluid shear stress in the canaliculi of a loaded osteon. Biomed Eng Online. 2016;15(Suppl 2):149. doi: 10.1186/s12938-016-0267-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 130.Matsuzaki H., Wohl G.R., Novack D.V., et al. Damaging fatigue loading stimulates increases in periosteal vascularity at sites of bone formation in the rat ulna. Calcif Tissue Int. 2007;80(6):391–399. doi: 10.1007/s00223-007-9031-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 131.Kennedy O.D., Herman B.C., Laudier D.M., et al. Activation of resorption in fatigue-loaded bone involves both apoptosis and active pro-osteoclastogenic signaling by distinct osteocyte populations. Bone. 2012;50(5):1115–1122. doi: 10.1016/j.bone.2012.01.025. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 132.Carrieroa A., Pereirab A.F., Wilson A.J., et al. Spatial relationship between bone formation and mechanical stimulus within cortical bone: combining 3D fluorochrome mapping and poroelastic finite element modelling. BoneKEy Rep. 2018;8:72–80. doi: 10.1016/j.bonr.2018.02.003. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 133.Cullen D.M., Smith R.T., Akhter M.P. Bone-loading response varies with strain magnitude and cycle number. J Appl Physiol. 1985;91(5):1971–1976. doi: 10.1152/jappl.2001.91.5.1971. 2001. [DOI] [PubMed] [Google Scholar]
  • 134.Robling A.G., Hinant F.M., Burr D.B., et al. Improved bone structure and strength after long-term mechanical loading is greatest if loading is separated into short bouts. J Bone Min Res. 2002;17(8):1545–1554. doi: 10.1359/jbmr.2002.17.8.1545. [DOI] [PubMed] [Google Scholar]
  • 135.Burr D.B., Robling A.G., Turner C.H. Effects of biomechanical stress on bones in animals. Bone. 2002;30(5):781–786. doi: 10.1016/s8756-3282(02)00707-x. [DOI] [PubMed] [Google Scholar]
  • 136.Yang H., Butz K.D., Duffy D., et al. Characterization of cancellous and cortical bone strain in the in vivo mouse tibial loading model using microCT-based finite element analysis. Bone. 2014;66:131–139. doi: 10.1016/j.bone.2014.05.019. [DOI] [PubMed] [Google Scholar]
  • 137.Voelkl B., Vogt L., Sena E.S., et al. Reproducibility of preclinical animal research improves with heterogeneity of study samples. PLoS Biol. 2018;16(2) doi: 10.1371/journal.pbio.2003693. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 138.Tannenbaum J., Bennett B.T. Russell and Burch's 3Rs then and now: the need for clarity in definition and purpose. J Am Assoc Lab Anim Sci. 2015;54(2):120–132. [PMC free article] [PubMed] [Google Scholar]
  • 139.Pound P., Ebrahim S., Sandercock P., et al. Where is the evidence that animal research benefits humans? Br Med J. 2004;328(7438):514–517. doi: 10.1136/bmj.328.7438.514. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 140.Samvelyan H.J., Mathers J.C., Skerry T.M. Feeding intervention potentiates the effect of mechanical loading to induce new bone formation in mice. FASEB J. 2021;35(10) doi: 10.1096/fj.202100334RR. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 141.Mertiya A.S., Tiwari A.K., Mishra A., et al. Computational modeling for osteogenic potential assessment of physical exercises based on loading-induced mechanobiological environments in cortical bone remodeling. Biomech Model Mechanobiol. 2023;22(1):281–295. doi: 10.1007/s10237-022-01647-5. [DOI] [PubMed] [Google Scholar]
  • 142.Kumar R., Tiwari A.K., Tripathi D., et al. Canalicular fluid flow induced by loading waveforms: a comparative analysis. J Theor Biol. 2019;471:59–73. doi: 10.1016/j.jtbi.2019.03.023. [DOI] [PubMed] [Google Scholar]
  • 143.Rubin C., Turner A.S., Müller R., et al. Quantity and quality of trabecular bone in the femur are enhanced by a strongly anabolic, noninvasive mechanical intervention. J Bone Min Res. 2002;17(2):349–357. doi: 10.1359/jbmr.2002.17.2.349. [DOI] [PubMed] [Google Scholar]
  • 144.Qin Y.X., Xia Y., Muir J., et al. Quantitative ultrasound imaging monitoring progressive disuse osteopenia and mechanical stimulation mitigation in calcaneus region through a 90-day bed rest human study. J Orthop Translat. 2019;18:48–58. doi: 10.1016/j.jot.2018.11.004. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 145.Wang H., Du T., Li R., et al. Interactive effects of various loading parameters on the fluid dynamics within the lacunar-canalicular system for a single osteocyte. Bone. 2022;158 doi: 10.1016/j.bone.2022.116367. [DOI] [PubMed] [Google Scholar]
  • 146.Fritton S.P., McLeod K.J., Rubin C.T. Quantifying the strain history of bone: spatial uniformity and self-similarity of low-magnitude strains. J Biomech. 2000;33(3):317–325. doi: 10.1016/s0021-9290(99)00210-9. [DOI] [PubMed] [Google Scholar]
  • 147.Kesavan C., Mohan S., Oberholtzer S., et al. Mechanical loading-induced gene expression and BMD changes are different in two inbred mouse strains. J Appl Physiol. 1985;99(5):1951–1957. doi: 10.1152/japplphysiol.00401.2005. 2005. [DOI] [PubMed] [Google Scholar]
  • 148.Friedman M.A., Abood A., Senwar B., et al. Genetic variability affects the skeletal response to immobilization in founder strains of the diversity outbred mouse population. BoneKEy Rep. 2021;15 doi: 10.1016/j.bonr.2021.101140. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 149.Holguin N., Brodt M.D., Sanchez M.E., et al. Adaptation of tibial structure and strength to axial compression depends on loading history in both C57BL/6 and BALB/c mice. Calcif Tissue Int. 2013;93(3):211–221. doi: 10.1007/s00223-013-9744-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 150.Daly R.M. The effect of exercise on bone mass and structural geometry during growth. Med Sport Sci. 2007;51:33–49. doi: 10.1159/000103003. [DOI] [PubMed] [Google Scholar]
  • 151.Cardadeiro G., Baptista F., Ornelas R., et al. Sex specific association of physical activity on proximal femur BMD in 9 to 10 year-old children. PLoS One. 2012;7(11) doi: 10.1371/journal.pone.0050657. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 152.Mosley J.R., Lanyon L.E. Growth rate rather than gender determines the size of the adaptive response of the growing skeleton to mechanical strain. Bone. 2002;30(1):314–319. doi: 10.1016/s8756-3282(01)00626-3. [DOI] [PubMed] [Google Scholar]
  • 153.Galea G.L., Delisser P.J., Meakin L., et al. Bone gain following loading is site-specifically enhanced by prior and concurrent disuse in aged male mice. Bone. 2020;133 doi: 10.1016/j.bone.2020.115255. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 154.Lynch M.E., Main R.P., Xu Q., et al. Cancellous bone adaptation to tibial compression is not sex dependent in growing mice. J Appl Physiol. 2010;109(3):685–691. doi: 10.1152/japplphysiol.00210.2010. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 155.Carson E.A., Kenney-Hunt J.P., Pavlicev M., et al. Weak genetic relationship between trabecular bone morphology and obesity in mice. Bone. 2012;51(1):46–53. doi: 10.1016/j.bone.2012.03.031. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 156.Saxon L.K., Galea G., Meakin L., et al. Estrogen receptors α and β have different gender-dependent effects on the adaptive responses to load bearing in cancellous and cortical bone. Endocrinology. 2012;153(5):2254–2266. doi: 10.1210/en.2011-1977. [DOI] [PubMed] [Google Scholar]
  • 157.Patel T.K., Brodt M.D., Silva M.J. Experimental and finite element analysis of strains induced by axial tibial compression in young-adult and old female C57Bl/6 mice. J Biomech. 2014;47(2):451–457. doi: 10.1016/j.jbiomech.2013.10.052. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 158.Razi H., Birkhold A.I., Weinkamer R., et al. Aging leads to a dysregulation in mechanically driven bone formation and resorption. J Bone Min Res. 2015;30(10):1864–1873. doi: 10.1002/jbmr.2528. [DOI] [PubMed] [Google Scholar]
  • 159.Holguin N., Brodt M.D., Sanchez M.E., et al. Aging diminishes lamellar and woven bone formation induced by tibial compression in adult C57BL/6. Bone. 2014;65:83–91. doi: 10.1016/j.bone.2014.05.006. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 160.Birkhold A.I., Razi H., Duda G.N., et al. Mineralizing surface is the main target of mechanical stimulation independent of age: 3D dynamic in vivo morphometry. Bone. 2014;66:15–25. doi: 10.1016/j.bone.2014.05.013. [DOI] [PubMed] [Google Scholar]
  • 161.Birkhold A.I., Razi H., Duda G.N., et al. The influence of age on adaptive bone formation and bone resorption. Biomaterials. 2014;35(34):9290–9301. doi: 10.1016/j.biomaterials.2014.07.051. [DOI] [PubMed] [Google Scholar]
  • 162.Rubin C.T., Bain S.D., McLeod K.J. Suppression of the osteogenic response in the aging skeleton. Calcif Tissue Int. 1992;50(4):306–313. doi: 10.1007/bf00301627. [DOI] [PubMed] [Google Scholar]
  • 163.Lambers F.M., Kuhn G., Weigt C., et al. Bone adaptation to cyclic loading in murine caudal vertebrae is maintained with age and directly correlated to the local micromechanical environment. J Biomech. 2015;48(6):1179–1187. doi: 10.1016/j.jbiomech.2014.11.020. [DOI] [PubMed] [Google Scholar]
  • 164.Meakin L.B., Galea G.L., Sugiyama T., et al. Age-related impairment of bones' adaptive response to loading in mice is associated with sex-related deficiencies in osteoblasts but no change in osteocytes. J Bone Min Res. 2014;29(8):1859–1871. doi: 10.1002/jbmr.2222. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 165.Lynch M.E., Main R.P., Xu Q., et al. Tibial compression is anabolic in the adult mouse skeleton despite reduced responsiveness with aging. Bone. 2011;49(3):439–446. doi: 10.1016/j.bone.2011.05.017. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 166.Willie B.M., Birkhold A.I., Razi H., et al. Diminished response to in vivo mechanical loading in trabecular and not cortical bone in adulthood of female C57Bl/6 mice coincides with a reduction in deformation to load. Bone. 2013;55(2):335–346. doi: 10.1016/j.bone.2013.04.023. [DOI] [PubMed] [Google Scholar]
  • 167.Willinghamm M.D., Brodt M.D., Lee K.L., et al. Age-related changes in bone structure and strength in female and male BALB/c mice. Calcif Tissue Int. 2010;86(6):470–483. doi: 10.1007/s00223-010-9359-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 168.Cooper D.M., Thomas C.D., Clement J.G., et al. Age-dependent change in the 3D structure of cortical porosity at the human femoral midshaft. Bone. 2007;40(4):957–965. doi: 10.1016/j.bone.2006.11.011. [DOI] [PubMed] [Google Scholar]
  • 169.Javaheri B., Pitsillides A.A. Aging and mechanoadaptive responsiveness of bone. Curr Osteoporos Rep. 2019;17(6):560–569. doi: 10.1007/s11914-019-00553-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 170.Beller G., Belavý D.L., Sun L., et al. WISE-2005: bed-rest induced changes in bone mineral density in women during 60 days simulated microgravity. Bone. 2011;49(4):858–866. doi: 10.1016/j.bone.2011.06.021. [DOI] [PubMed] [Google Scholar]
  • 171.Rittweger J., Winwood K., Seynnes O., et al. Bone loss from the human distal tibia epiphysis during 24 days of unilateral lower limb suspension. J Physiol. 2006;577(Pt 1):331–337. doi: 10.1113/jphysiol.2006.115782. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 172.Coupaud S., McLean A.N., Purcell M., et al. Decreases in bone mineral density at cortical and trabecular sites in the tibia and femur during the first year of spinal cord injury. Bone. 2015;74:69–75. doi: 10.1016/j.bone.2015.01.005. [DOI] [PubMed] [Google Scholar]
  • 173.Vico L., van Rietbergen B., Vilayphiou N., et al. Cortical and trabecular bone microstructure did not recover at weight-bearing skeletal sites and progressively deteriorated at non-weight-bearing sites during the year following international space station missions. J Bone Min Res. 2017;32(10):2010–2021. doi: 10.1002/jbmr.3188. [DOI] [PubMed] [Google Scholar]
  • 174.Stavnichuk M., Mikolajewicz N., Corlett T., et al. A systematic review and meta-analysis of bone loss in space travelers. NPJ Microgravity. 2020;6:13. doi: 10.1038/s41526-020-0103-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 175.Buettmann E.G., Goldscheitter G.M., Hoppock G.A., et al. Similarities between disuse and age-induced bone loss. J Bone Min Res. 2022;37(8):1417–1434. doi: 10.1002/jbmr.4643. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 176.Lau R.Y., Guo X. A review on current osteoporosis research: with special focus on disuse bone loss. J Osteoporos. 2011;2011 doi: 10.4061/2011/293808. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 177.Globus R.K., Morey-Holton E. Hindlimb unloading: rodent analog for microgravity. J Appl Physiol. 1985;120(10):1196–1206. doi: 10.1152/japplphysiol.00997.2015. 2016. [DOI] [PubMed] [Google Scholar]
  • 178.Piet J., Hu D., Baron R., et al. Bone adaptation compensates resorption when sciatic neurectomy is followed by low magnitude induced loading. Bone. 2019;120:487–494. doi: 10.1016/j.bone.2018.12.017. [DOI] [PubMed] [Google Scholar]
  • 179.De Souza R.L., Pitsillides A.A., Lanyon L.E., et al. Sympathetic nervous system does not mediate the load-induced cortical new bone formation. J Bone Min Res. 2005;20(12):2159–2168. doi: 10.1359/jbmr.050812. [DOI] [PubMed] [Google Scholar]
  • 180.Meakin L.B., Delisser P.J., Galea G.L., et al. Disuse rescues the age-impaired adaptive response to external loading in mice. Osteoporos Int. 2015;26(11):2703–2708. doi: 10.1007/s00198-015-3142-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 181.DeSouza R., Javaheri B., Collinson R.S., et al. Prolonging disuse in aged mice amplifies cortical but not trabecular bones' response to mechanical loading. J Musculoskelet Neuronal Interact. 2017;17(3):218–225. [PMC free article] [PubMed] [Google Scholar]
  • 182.Liu X., Yan Z., Cai J., et al. Glucose- and glutamine-dependent bioenergetics sensitize bone mechanoresponse after unloading by modulating osteocyte calcium dynamics. J Clin Investig. 2023;133(3) doi: 10.1172/jci164508. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 183.Cunningham H.C., Orr S., Murugesh D.K., et al. Differential bone adaptation to mechanical unloading and reloading in young, old, and osteocyte deficient mice. Bone. 2023;167 doi: 10.1016/j.bone.2022.116646. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 184.Ruden D.M., Rappolee D.A. Effects of gravity, microgravity or microgravity simulation on early mouse embryogenesis: a review of the first two space embryo studies. Mechanobiology in Medicine. 2024;2(4) doi: 10.1016/j.mbm.2024.100081. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 185.Rooney A.M., van der Meulen M.C.H. Mouse models to evaluate the role of estrogen receptor α in skeletal maintenance and adaptation. Ann N Y Acad Sci. 2017;1410(1):85–92. doi: 10.1111/nyas.13523. [DOI] [PubMed] [Google Scholar]
  • 186.O'Sullivan L.M., Allison H., Parle E.E., et al. Secondary alterations in bone mineralisation and trabecular thickening occur after long-term estrogen deficiency in ovariectomised rat tibiae, which do not coincide with initial rapid bone loss. Osteoporos Int. 2020;31(3):587–599. doi: 10.1007/s00198-019-05239-5. [DOI] [PubMed] [Google Scholar]
  • 187.Callewaert F., Boonen S., Vanderschueren D. Sex steroids and the male skeleton: a tale of two hormones. Trends Endocrinol Metabol. 2010;21(2):89–95. doi: 10.1016/j.tem.2009.09.002. [DOI] [PubMed] [Google Scholar]
  • 188.Järvinen T.L., Kannus P., Pajamäki I., et al. Estrogen deposits extra mineral into bones of female rats in puberty, but simultaneously seems to suppress the responsiveness of female skeleton to mechanical loading. Bone. 2003;32(6):642–651. doi: 10.1016/s8756-3282(03)00100-5. [DOI] [PubMed] [Google Scholar]
  • 189.Tou J.C., Foley A., Yuan Y.V., et al. The effect of ovariectomy combined with hindlimb unloading and reloading on the long bones of mature Sprague-Dawley rats. Menopause. 2008;15(3):494–502. doi: 10.1097/gme.0b013e318148bbad. [DOI] [PubMed] [Google Scholar]
  • 190.Saxon L.K., Turner C.H. Low-dose estrogen treatment suppresses periosteal bone formation in response to mechanical loading. Bone. 2006;39(6):1261–1267. doi: 10.1016/j.bone.2006.06.030. [DOI] [PubMed] [Google Scholar]
  • 191.Swanson C., Shea S.A., Wolfe P., et al. 24-hour profile of serum sclerostin and its association with bone biomarkers in men. Osteoporos Int. 2017;28(11):3205–3213. doi: 10.1007/s00198-017-4162-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 192.Qvist P., Christgau S., Pedersen B.J., et al. Circadian variation in the serum concentration of C-terminal telopeptide of type I collagen (serum CTx): effects of gender, age, menopausal status, posture, daylight, serum cortisol, and fasting. Bone. 2002;31(1):57–61. doi: 10.1016/s8756-3282(02)00791-3. [DOI] [PubMed] [Google Scholar]
  • 193.Redmond J., Fulford A.J., Jarjou L., et al. Diurnal rhythms of bone turnover markers in three ethnic groups. J Clin Endocrinol Metab. 2016;101(8):3222–3230. doi: 10.1210/jc.2016-1183. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 194.van der Spoel E., Oei N., Cachucho R., et al. The 24-hour serum profiles of bone markers in healthy older men and women. Bone. 2019;120:61–69. doi: 10.1016/j.bone.2018.10.002. [DOI] [PubMed] [Google Scholar]
  • 195.Zhang R., Lahens N.F., Ballance H.I., et al. A circadian gene expression atlas in mammals: implications for biology and medicine. Proc Natl Acad Sci U S A. 2014;111(45):16219–16224. doi: 10.1073/pnas.1408886111. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 196.Schroeder A.M., Truong D., Loh D.H., et al. Voluntary scheduled exercise alters diurnal rhythms of behaviour, physiology and gene expression in wild-type and vasoactive intestinal peptide-deficient mice. J Physiol. 2012;590(23):6213–6226. doi: 10.1113/jphysiol.2012.233676. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 197.Bouchard A.L., Dsouza C., Julien C., et al. Bone adaptation to mechanical loading in mice is affected by circadian rhythms. Bone. 2022;154 doi: 10.1016/j.bone.2021.116218. [DOI] [PubMed] [Google Scholar]
  • 198.Eller K., DiMauro N., Garnier J., et al. Mechanoadaptation of the bones of mice with high fat diet induced obesity in response to cyclical loading. J Biomech. 2021;124 doi: 10.1016/j.jbiomech.2021.110569. [DOI] [PubMed] [Google Scholar]
  • 199.Lagerquist M.K., Gustafsson K.L., Henning P., et al. Acute fat loss does not affect bone mass. Sci Rep. 2021;11(1) doi: 10.1038/s41598-021-93450-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 200.Wang L., You X., Zhang L., et al. Mechanical regulation of bone remodeling. Bone Res. 2022;10(1):16. doi: 10.1038/s41413-022-00190-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 201.Duncan R.L., Turner C.H. Mechanotransduction and the functional response of bone to mechanical strain. Calcif Tissue Int. 1995;57(5):344–358. doi: 10.1007/bf00302070. [DOI] [PubMed] [Google Scholar]
  • 202.Turner C.H., Pavalko F.M. Mechanotransduction and functional response of the skeleton to physical stress: the mechanisms and mechanics of bone adaptation. J Orthop Sci. 1998;3(6):346–355. doi: 10.1007/s007760050064. [DOI] [PubMed] [Google Scholar]
  • 203.Vahidi G., Rux C., Sherk V.D., et al. Lacunar-canalicular bone remodeling: impacts on bone quality and tools for assessment. Bone. 2021;143 doi: 10.1016/j.bone.2020.115663. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 204.Schaffler M.B., Cheung W.Y., Majeska R., et al. Osteocytes: master orchestrators of bone. Calcif Tissue Int. 2014;94(1):5–24. doi: 10.1007/s00223-013-9790-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 205.Wang L. Solute transport in the bone lacunar-canalicular system (LCS) Curr Osteoporos Rep. 2018;16(1):32–41. doi: 10.1007/s11914-018-0414-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 206.Qin L., Liu W., Cao H., et al. Molecular mechanosensors in osteocytes. Bone Res. 2020;8:23. doi: 10.1038/s41413-020-0099-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 207.Ding D., Yang X., Luan H.Q., et al. Pharmacological regulation of primary cilium formation affects the mechanosensitivity of osteocytes. Calcif Tissue Int. 2020;107(6):625–635. doi: 10.1007/s00223-020-00756-6. [DOI] [PubMed] [Google Scholar]
  • 208.Rosa N., Simoes R., Magalhães F.D., et al. From mechanical stimulus to bone formation: a review. Med Eng Phys. 2015;37(8):719–728. doi: 10.1016/j.medengphy.2015.05.015. [DOI] [PubMed] [Google Scholar]
  • 209.Wang B., Lai X., Price C., et al. Perlecan-containing pericellular matrix regulates solute transport and mechanosensing within the osteocyte lacunar-canalicular system. J Bone Min Res. 2014;29(4):878–891. doi: 10.1002/jbmr.2105. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 210.Daegling D.J., Bhramdat H.D., Toro-Ibacache V. Efficacy of shear strain gradients as an osteogenic stimulus. J Theor Biol. 2021;524 doi: 10.1016/j.jtbi.2021.110730. [DOI] [PubMed] [Google Scholar]
  • 211.Meslier Q.A., DiMauro N., Somanchi P., et al. Manipulating load-induced fluid flow in vivo to promote bone adaptation. Bone. 2022;165 doi: 10.1016/j.bone.2022.116547. [DOI] [PubMed] [Google Scholar]
  • 212.You L., Cowin S.C., Schaffler M.B., et al. A model for strain amplification in the actin cytoskeleton of osteocytes due to fluid drag on pericellular matrix. J Biomech. 2001;34(11):1375–1386. doi: 10.1016/s0021-9290(01)00107-5. [DOI] [PubMed] [Google Scholar]
  • 213.Fan L., Pei S., Lucas Lu X., et al. A multiscale 3D finite element analysis of fluid/solute transport in mechanically loaded bone. Bone Res. 2016;4 doi: 10.1038/boneres.2016.32. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 214.Dallas S.L., Prideaux M., Bonewald L.F. The osteocyte: an endocrine cell ... and more. Endocr Rev. 2013;34(5):658–690. doi: 10.1210/er.2012-1026. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 215.Cao W., Helder M.N., Bravenboer N., et al. Is there a governing role of osteocytes in bone tissue regeneration? Curr Osteoporos Rep. 2020;18(5):541–550. doi: 10.1007/s11914-020-00610-6. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 216.Lewis K.J., Frikha-Benayed D., Louie J., et al. Osteocyte calcium signals encode strain magnitude and loading frequency in vivo. Proc Natl Acad Sci U S A. 2017;114(44):11775–11780. doi: 10.1073/pnas.1707863114. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 217.Lu X.L., Huo B., Park M., et al. Calcium response in osteocytic networks under steady and oscillatory fluid flow. Bone. 2012;51(3):466–473. doi: 10.1016/j.bone.2012.05.021. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 218.Gong X., Fan Y., Zhang Y., et al. Inserted rest period resensitizes MC3T3-E1 cells to fluid shear stress in a time-dependent manner via F-actin-regulated mechanosensitive channel(s) Biosci Biotechnol Biochem. 2014;78(4):565–573. doi: 10.1080/09168451.2014.895657. [DOI] [PubMed] [Google Scholar]
  • 219.Batra N.N., Li Y.J., Yellowley C.E., et al. Effects of short-term recovery periods on fluid-induced signaling in osteoblastic cells. J Biomech. 2005;38(9):1909–1917. doi: 10.1016/j.jbiomech.2004.08.009. [DOI] [PubMed] [Google Scholar]
  • 220.Srinivasan S., Gross T.S. Canalicular fluid flow induced by bending of a long bone. Med Eng Phys. 2000;22(2):127–133. doi: 10.1016/s1350-4533(00)00021-7. [DOI] [PubMed] [Google Scholar]
  • 221.Cresswell E.N., Nguyen T.M., Horsfield M.W., et al. Mechanically induced bone formation is not sensitive to local osteocyte density in rat vertebral cancellous bone. J Orthop Res. 2018;36(2):672–681. doi: 10.1002/jor.23606. [DOI] [PubMed] [Google Scholar]
  • 222.van Tol A.F., Schemenz V., Wagermaier W., et al. The mechanoresponse of bone is closely related to the osteocyte lacunocanalicular network architecture. Proc Natl Acad Sci USA. 2020;117(51):32251–32259. doi: 10.1073/pnas.2011504117. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 223.Kola S.K., Begonia M.T., Tiede-Lewis L.M., et al. Osteocyte lacunar strain determination using multiscale finite element analysis. BoneKEy Rep. 2020;12 doi: 10.1016/j.bonr.2020.100277. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 224.Zhao S., Chen Z., Li T., et al. Numerical simulations of fluid flow in trabecular-lacunar cavities under cyclic loading. Comput Biol Med. 2023;163 doi: 10.1016/j.compbiomed.2023.107144. [DOI] [PubMed] [Google Scholar]
  • 225.Fu R, Wang C, Shahneela N, et al. A whole bone-lacunocanalicular network-osteocyte model examining bone adaptation to distinct loading parameters. Int J Mech Sci. 2025;286:109931. doi: 10.1016/j.ijmecsci.2025.109931. [DOI] [Google Scholar]
  • 226.Fu R, Yang H. Effects of lacunocanalicular morphology and network architecture on fluid dynamic environments of osteocytes and bone mechanoresponses. Phys Fluids. 2024;36(12):121915. doi: 10.1063/5.0242900. [DOI] [Google Scholar]
  • 227.Lai X., Chung R., Li Y., et al. Lactation alters fluid flow and solute transport in maternal skeleton: a multiscale modeling study on the effects of microstructural changes and loading frequency. Bone. 2021;151 doi: 10.1016/j.bone.2021.116033. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 228.Wolff J. Springer Berlin Heidelberg; 1986. The Law of Bone Remodelling[C] [Google Scholar]
  • 229.Frost H.M. On our age-related bone loss: insights from a new paradigm. J Bone Min Res. 1997;12(10):1539–1546. doi: 10.1359/jbmr.1997.12.10.1539. [DOI] [PubMed] [Google Scholar]
  • 230.Scerrato D., Giorgio I., Bersani A.M., et al. A proposal for a novel formulation based on the hyperbolic cattaneo's equation to describe the mechano-transduction process occurring in bone remodeling. 2022;14(11):2436. [Google Scholar]
  • 231.Giorgio I., dell'Isola F., Andreaus U., et al. An orthotropic continuum model with substructure evolution for describing bone remodeling: an interpretation of the primary mechanism behind Wolff's law. Biomech Model Mechanobiol. 2023;22(6):2135–2152. doi: 10.1007/s10237-023-01755-w. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 232.Giorgio I., dell'Isola F., Andreaus U., et al. On mechanically driven biological stimulus for bone remodeling as a diffusive phenomenon. Biomech Model Mechanobiol. 2019;18(6):1639–1663. doi: 10.1007/s10237-019-01166-w. [DOI] [PubMed] [Google Scholar]
  • 233.George D., Allena R., Remond Y.J.M., et al. A multiphysics stimulus for continuum mechanics bone remodeling. 2018;6(4):307–319. [Google Scholar]
  • 234.Bednarczyk E., Sikora S., Jankowski K., et al. 2024. Mathematical Model of Osteophyte Development with the First Attempt to Identify a Biomechanical Parameter; pp. 1–11. [Google Scholar]
  • 235.Tiwari A.K., Kumar N. Establishing the relationship between loading parameters and bone adaptation. Med Eng Phys. 2018;56:16–26. doi: 10.1016/j.medengphy.2018.04.004. [DOI] [PubMed] [Google Scholar]
  • 236.Kumar R., Pathak V.K. Prediction of cortical bone mineral apposition rate in response to loading using an adaptive neuro-fuzzy inference system. Comput Methods Biomech Biomed Eng. 2023;26(3):261–280. doi: 10.1080/10255842.2022.2058322. [DOI] [PubMed] [Google Scholar]
  • 237.Wang L., Wang Y., Han Y., et al. In situ measurement of solute transport in the bone lacunar-canalicular system. Proc Natl Acad Sci U S A. 2005;102(33):11911–11916. doi: 10.1073/pnas.0505193102. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 238.de Oliveira R.D.J., de Oliveira R.G., de Oliveira L.C., et al. Effectiveness of whole-body vibration on bone mineral density in postmenopausal women: a systematic review and meta-analysis of randomized controlled trials. Osteoporos Int. 2023;34(1):29–52. doi: 10.1007/s00198-022-06556-y. [DOI] [PubMed] [Google Scholar]
  • 239.O'Bryan S.J., Giuliano C., Woessner M.N., et al. Progressive resistance training for concomitant increases in muscle strength and bone mineral density in older adults: a systematic review and meta-analysis. Sports Med. 2022;52(8):1939–1960. doi: 10.1007/s40279-022-01675-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 240.Turner C.H., Forwood M.R., Rho J.Y., Yoshikawa T. Mechanical loading thresholds for lamellar and woven bone formation. J Bone Miner Res. 1994;9(1):87–97. doi: 10.1002/jbmr.5650090113. [DOI] [PubMed] [Google Scholar]
  • 241.Hsieh Y.F., Robling A.G., Ambrosius W.T., Burr D.B., Turner C.H. Mechanical loading of diaphyseal bone in vivo: the strain threshold for an osteogenic response varies with location. J Bone Miner Res. 2001;16(12):2291–2297. doi: 10.1359/jbmr.2001.16.12.2291. [DOI] [PubMed] [Google Scholar]
  • 242.Yang H., Bullock W.A., Myhal A., DeShield P., Duffy D., Main R.P. Cancellous bone may have a greater adaptive strain threshold than cortical bone. JBMR Plus. 2021;5(5) doi: 10.1002/jbm4.10489. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 243.Turner C.H., Forwood M.R., Otter M.W. Mechanotransduction in bone: do bone cells act as sensors of fluid flow? FASEB J. 1994;8(11):875–878. doi: 10.1096/fasebj.8.11.8070637. [DOI] [PubMed] [Google Scholar]
  • 244.Warden S.J., Turner C.H. Mechanotransduction in the cortical bone is most efficient at loading frequencies of 5-10 hz. Bone. 2004;34(2):261–270. doi: 10.1016/j.bone.2003.11.011. [DOI] [PubMed] [Google Scholar]
  • 245.Zhang P., Tanaka S.M., Sun Q., Turner C.H., Yokota H. Frequency-dependent enhancement of bone formation in murine tibiae and femora with knee loading. J Bone Miner Metabol. 2007;25(6):383–391. doi: 10.1007/s00774-007-0774-8. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 246.Turner C.H., Owan I., Takano Y. Mechanotransduction in bone: role of strain rate. Am J Physiol. 1995;269(3 Pt 1):E438–E442. doi: 10.1152/ajpendo.1995.269.3.E438. [DOI] [PubMed] [Google Scholar]
  • 247.LaMothe J.M., Hamilton N.H., Zernicke R.F. Strain rate influences periosteal adaptation in mature bone. Med Eng Phys. 2005;27(4):277–284. doi: 10.1016/j.medengphy.2004.04.012. [DOI] [PubMed] [Google Scholar]
  • 248.Cullen D.M., Smith R.T., Akhter M.P. Bone-loading response varies with strain magnitude and cycle number. J Appl Physiol. 1985;91(5):1971–1976. doi: 10.1152/jappl.2001.91.5.1971. 2001. [DOI] [PubMed] [Google Scholar]

Articles from Mechanobiology in Medicine are provided here courtesy of Elsevier

RESOURCES