Table 1.
Model Size | Stimulations | No. of Chains Responding | TPT ms | Transv. Velocity cm/sec | |
7 × 7 | A | Entire A Chain | 7 | 1.2 | 8.0 |
Cell A1 Only | 7 | 1.5 | 6.4 | ||
R | Entire G Chain | 7 | 1.2 | 8.0 | |
Cell G1 Only | 6 (A failed) | 1.5 | 5.4 | ||
5 × 5 | A | Entire A Chain | 5 | 1.6 | 4.0 |
Cell A1 Only | 5 | 1.7 | 3.8 | ||
R | Entire E Chain | 5 | 1.7 | 3.8 | |
Cell E1 Only | 5 | 1.8 | 3.6 | ||
3 × 4 | A | Entire A Chain | 3 | 1.0 | 3.2 |
Cell A1 Only | 3 | 1.1 | 2.9 | ||
R | Entire C Chain | 3 | 1.2 | 2.7 | |
Cell C1 Only | 3 | 1.2 | 2.7 | ||
2 × 3 | A | Entire A Chain | 2 | 0.7 | 2.3 |
Cell A1 Only | 2 | 0.8 | 2.0 | ||
R | Entire B Chain | 2 | 0.9 | 1.8 | |
Cell B1 Only | 2 | 0.9 | 1.8 |
A = antegrade R = retrograde
Circuit Parameters: RBT = 10 KΩ Rjc = 25 MΩ (50 MΩ/2); Cj = 16 pF; Cs = 0.2 pF
To improve the performance of the 7 × 7 model (for Rol2 of 500 KΩ), Rjc was decreased slightly to 24.5 MΩ (49.0 MΩ/2).