Abstract
The musculoskeletal system is essential for human movement. However, the increasing incidence of complex musculoskeletal injuries, which involve substantial loss of soft (muscle, skin) and hard (bone) tissues poses significant clinical challenges. Autogenous and allogeneic bone grafts are the most commonly adopted surgical methods for severe bone defects. However, severe postoperative complications, such as immune rejection and donor site necrosis, can lead to poor prognosis. Additionally, the scarcity of bone graft sources limits their application. Moreover, soft tissue injuries are often inadequately addressed in orthopedic procedures, leading to impaired muscle function and highlighting the urgent need for new strategies in integrated musculoskeletal repair. This review explores tissue engineering solutions by examining the interplay between muscle and bone physiology, elucidating their regenerative mechanisms, and evaluating innovations such as hydrogels, electrospun fibers, and conductive scaffolds for tissue repair. We advocate for integrated strategies that target the simultaneous restoration of soft and hard tissues to improve clinical outcomes.
Keywords: Open bone injury, Musculoskeletal repair, Hydrogel material, Electrospun fiber material, Conductive material
Highlights
We provide a comprehensive overview of the latest developments in biomaterials and tissue engineering techniques that facilitate the regeneration of both muscle and bone tissues.
We discuss the critical interactions between these two tissue types and how these insights can inform the design of effective treatment strategies.
Our review highlights the challenges in current approaches and proposes future directions that could lead to significant improvements in clinical outcomes for patients with musculoskeletal injuries.
Background
The proper functioning of bodily systems depends on the synchronized activities of diverse tissues, each performing its specific role. In the musculoskeletal system, the primary constituents include bones, tendons, skeletal muscles, and their interfaces [1]. The smooth functioning of human movement is facilitated by the coordinated operation of bones (providing supportive and lever actions), muscles (generating contraction forces), and tendons (integrating these actions) [2]. Movement is a fundamental aspect of human existence, underscoring the critical role of the bone-tendon-muscle unit in maintaining quality of life.
Musculoskeletal diseases and injuries rank as the second leading cause of global disability after mental disorders, with a 19.9% increase over the past decade [3]. Musculoskeletal disorders were projected to impose an annual economic burden of ~USD 980.1 billion in the United States [4]. Open bone injuries are an important manifestation of musculoskeletal injuries, whose incidence is on the rise due to the escalating occurrence of high-energy injuries such as traffic accidents and falls from height. Statistics show that open bone injuries account for ~10% of all musculoskeletal injuries [5, 6]. This type of injury involves soft tissue damage, including volumetric muscle loss (VML), skin defects, and vascular injury [7]. The Gustilo-Anderson classification system classifies open fractures with extensive damage to vascular networks and soft tissues as type IIIC, which is considered the most serious fracture type [5, 8, 9]. Such traumatic disorders frequently result in complex orthopedic issues, including infection, delayed healing, or nonunion, occurring at nearly twice the rate of closed fractures [10, 11]. VML is the most common complication in Gustilo-Anderson type III fractures, accounting for ~65% [12]. Patients with VML often have more than a two-fold increase in medical costs [5]. Currently, the primary clinical strategies for managing Gustilo-Anderson type III trauma include debridement, soft tissue coverage, fracture fixation, and bone regeneration, with infection prevention being key to treatment success [13]. Thorough debridement, involving the removal of necrotic and contaminated tissues, is critical during clinical management, and early wound surface coverage is conducive to controlling infection and promoting fracture healing [14]. Hence, flap transplantations that include muscles, are extensively applied in open fractures. Research indicates that combining the Masquelet technique for bone regeneration with muscle flap transplantation for soft tissue repair can increase the limb salvage success rate when treating complex open injuries in the lower extremities with segmental bone loss [15, 16]. Currently, latissimus dorsi and rectus abdominis are commonly used in autologous musculocutaneous flaps. However, they have several disadvantages, including limited source, bulky appearance, high surgical complexity, and donor area site complications [17–19]. Engineered skeletal muscle has emerged as a promising alternative to traditional muscle flaps [20]. Bone loss from open fractures often results in complications like limb shortening and fracture nonunion. Traditional autologous bone transplantation surgeries face challenges such as the scarcity of autologous bone sources and donor site complications, while allogeneic bone transplantation is beset with numerous problems, including rejection reactions [21]. Artificial bones could provide flexible options for implantation in bone defect sites. Consequently, tissue engineering strategies hold promise for both soft tissue damage and bone injuries. Nevertheless, open bone fractures are complex, encompassing both soft and bone tissue injuries. The prognosis can only be improved by considering both. However, research on integrated bone and soft tissue repair is still at an initial stage. Therefore, overcoming challenges in exploring the structure and function of the musculoskeletal system and developing methods that simultaneously fulfill the repair requirements of both tissue types by integrating hard and soft strategies is crucial for improving outcomes in open bone fracture repair.
Research on isolated bone and muscle repair is relatively advanced, yet it often neglects the role of muscles in bone repair. Integrated repair of the musculoskeletal system plays a crucial role in the short-term repair of bone injuries and is indispensable in the long-term rehabilitation of sports. This review systematically examines the structure, function, and interplay among the constituents of the musculoskeletal system. It also clarifies the current understanding of bone and muscle regeneration. Moreover, advancements in tissue engineering for musculoskeletal regeneration and repair across three key domains—hydrogels, electrospun fibers, and conductive materials—are elucidated. We also discuss the prospects of tissue engineering in integrated musculoskeletal repair that integrates emerging technologies such as gradient layer design, four-dimensional (4D) bioprinting, and multi-scale biomimetic strategy (Figure 1). This comprehensive review advances the understanding of the role and significance of tissue engineering for the integrated restoration of the musculoskeletal system.
Figure 1.

Requirements for integrated musculoskeletal repair in tissue engineering material design. The design of engineered tissue materials for integrated musculoskeletal repair should consider three aspects: Cell selection, bioactive factors, and scaffolds. Cell selection considerations include angiogenesis promotion, layered design, and directed differentiation. Bioactive factors include the combination of multiple factors, layered design, and intelligent, responsive release. Scaffolds include 4D printed and multi-scale hierarchical scaffolds. Created by BioRender. https://BioRender.com/lg5kpag
Review
The musculoskeletal system
The musculoskeletal system, comprising ~206 bones, 700 skeletal muscles, and associated tendons [22], presents a complex network of structural and functional interactions. A thorough understanding of these intricate dynamics is crucial for developing integrated tissue engineering materials aimed at treating open fractures effectively. The system’s role in maintaining overall health and enhancing quality of life is undeniable. Therefore, a comprehensive understanding of the musculoskeletal system is essential for developing effective engineering materials tailored for its repair and regeneration.
Skeletal muscle structure and function
Skeletal muscles are a crucial and essential component of the motor system. They are intricately connected to tendons and bones through collagenous connective tissue. Constituting ~45% of total body mass, skeletal muscles play critical roles in metabolism and movement, highlighting their clinical significance [23, 24]. Although skeletal muscles demonstrate remarkable regenerative potential after injury, this capacity is finite. Extensive skeletal muscle loss due to injury or surgery compromises its regenerative ability [25, 26].
The skeletal muscle structure is closely linked to its function (Figure 2). Muscle movement is facilitated by the surrounding epimysium, a smooth extracellular connective tissue that enables muscle movement relative to adjacent tissues [27]. Each muscle comprises multiple fascicles (muscle bundles), which in turn contain muscle fibers, all encased by the perimysium. The muscle fibers contain dense, well-aligned myofibrils, which are enclosed by the endomysium. Each myofibril comprises longitudinally arranged sarcomeres, the functional contractile units of skeletal muscle. Sarcomeres are composed of myosin and actin filaments. Each muscle fiber contains thousands of sarcomeres. Sarcomeres are composed of myosin and actin filaments. Each muscle fiber contains thousands of sarcomeres. Adjacent sarcomeres are connected via Z-discs that anchor α-myosin. Sarcomeres primarily consist of bundled myosin filaments and intertwined tropomyosin and actin filaments [28]. Microscopic muscle fiber contraction is initiated by the sliding motion of these filaments, which is driven by the myosin head.
Figure 2.

The structure of skeletal muscles. (a) The intricate structure of a skeletal muscle, along with the surrounding capillaries, nerves, and extracellular matrix, is organized across a hierarchy of scales ranging from millimeters to nanometers. Adapted from [23] with permission. Copyright © 2022 Wiley‐VCH GmbH., licensed under CC BY 4.0. (b-c) Cross-sectional ultrastructure of the tibialis anterior muscle, demonstrated by tissue staining. Adapted from [29, 30] with permission
Bone structure and function
Bones are essential for maintaining both the structural and functional aspects of life, serving as the cornerstone of various physiological activities [31]. The cellular structure of bone tissue primarily consists of osteocytes, accompanied by other specific cell types such as osteoblasts and osteoclasts. Osteoblasts, derived from bone progenitor cells, act as key mechanosensory cells that regulate bone remodeling. Osteoclasts, on the other hand, originate from macrophages and play a pivotal role in bone resorption. Together, these cells regulate the turnover and renewal of bone tissue [22].
The bone tissue microenvironment is a dynamic network of complex components, including cells, the extracellular matrix (ECM), growth factors, a controlled pH, and metabolites (Figure 3). Bone composition is an inseparable combination of organic matrix and inorganic materials. The organic matrix, which consists predominantly of collagen (~90%), also includes non-collagenous proteins and lipids [32, 33]. Type I collagen, synthesized by osteoblasts, serves as the primary protein in the bone ECM, imparting mechanical strength to the tissue. Changes in collagen structure significantly contribute to a reduction in bone mechanical integrity, and mutations in the COL1A1 gene, which encodes a central component of Type I collagen, are strongly associated with osteoporotic defects. The bone’s inorganic matrix consists mainly of hydroxyapatite crystals—a calcium- and phosphorus-rich neutral salt that provides structural support [34].
Figure 3.

Microstructure of the bone tissue. The bone tissue microenvironment is a dynamic network of complex components such as cells, the extracellular matrix (ECM), growth factors, a controlled pH, and metabolites. Adapted from [35] with permission. Copyright © Biomater. Sci., licensed under CC BY 4.0
Other structures
In addition to the skeletal and muscular components, the musculoskeletal system also includes connective tissues such as tendons and ligaments. Tendon tissue comprises various cell types and a collagen-rich ECM that together optimize efficient force transmission. Within this tissue, specialized tendon cells serve as mechanosensors and actively contribute to ECM remodeling by secreting collagen [22]. Tendons are organized in a layered manner across multiple length scales to effectively withstand substantial tensile stresses. The collagenous ECM features a complex arrangement at multiple levels, contributing to the tendons’ structural sophistication. This hierarchical architecture endows tendons with exceptional tensile strength. Ligaments contain more active fibroblasts than the tendons and are composed of a larger proportion of Type III collagen and glycosaminoglycans. Their main function is to stabilize joints, limit excessive joint movement, and prevent dislocation [32].
The periosteum is a connective tissue membrane that covers the bone surface and is rich in nerves and blood vessels. Its main role is to provide nutrition to bones and participate in fracture repair and bone regeneration [36].
Bone tissue reconstruction and healing
The healing process of a bone fracture typically progresses through three distinct stages: the hematoma and inflammatory phase, the repair phase (involving fibrous callus and granulation tissue formation), and the remodeling phase (characterized by osseous callus formation; Figure 4).
Figure 4.

The three phases of bone regeneration. Bone regeneration progresses through three distinct pathophysiological stages: The inflammatory phase, the reparative phase, and the remodeling phase Adapted from [37] with permission
During the inflammatory and angiogenic stage, macrophages transition from the M1 type to the M2 type, releasing transforming growth factor-β (TGF-β) and platelet-derived growth factor (PDGF). These factors activate mesenchymal stem cells, promoting their differentiation into bone- and cartilage-forming cells. They also induce platelets to degranulate and release vascular endothelial growth factor (VEGF), which in turn promotes angiogenesis to provide nutrition for cartilage callus formation. The synergistic effect of these inflammatory cells and growth factors prepares the affected area for the repair phase, which primarily involves the transition from cartilage callus formation to bony callus formation.
Within 4–8 weeks post-injury, and before woven bone formation, bone continuity is restored through cartilage hypertrophy, matrix mineralization, and vascular reconstruction. At the regeneration site, the bone tissue transforms from a soft, connective state to a hard, supportive one. This is followed by the remodeling stage, where the mineralized callus adapts to the bone’s original shape, restoring its form and function according to mechanical requirements. This stage predominantly occurs between 8–12 weeks post-injury [38], marking the genuine transition from quantitative expansion to qualitative refinement.
At the cellular level, bone tissue repair relies on a diverse array of cells. Osteoblasts, crucial for bone formation, synthesize ECM proteins, including Type I collagen and alkaline phosphatase. These cells work together to form osteoid units, which serve as the foundational building blocks of bones. Structural support is primarily provided by Type I collagen and calcium deposits, in the form of hydroxyapatite [39].
Osteoblast differentiation depends on the presence of stem cells, predominantly bone or mesenchymal stem cells, which support bone regeneration through self-renewal, differentiation, cytokine secretion, and regulation of host tissue cells. Further elucidation is needed regarding the roles of immune microenvironment regulation and phenotypic changes of immune cells in maintaining bone homeostasis [40, 41]. Osteoclasts, which are derived from macrophages, also play a significant role and warrant special attention.
The impact of muscular activity on bone tissue regeneration
Muscle tissue as an important source of stem cells for bone regeneration
Bone fracture repair and regeneration rely on the coordinated migration, proliferation, and differentiation of various stem cell types. These include, particularly, bone marrow-derived mesenchymal stem cells (BMSCs), periosteum-derived mesenchymal stem cells (PMSCs), vascular endothelial progenitor cells (VEDPs), and muscle-derived stem cells (MDSCs). Hashimoto et al. [42] demonstrated that satellite cells express myoblast (Pax7, MyoD) and osteoblast (ALP, Runx-2) markers and can spontaneously differentiate into osteoblasts. Therefore, impaired bone repair due to muscle blockage may result from a lack of MDSCs. Liu et al. [43] found that the tibial axis primarily comprises bone marrow adipose tissue and is substantially covered by muscle groups attached to its surface. The direct muscle-bone attachment minimizes separation during fractures, effectively designating this musculature as a ‘secondary periosteum’.
Muscle tissue integrity protects the bone regeneration process
The success of bone injury repair depends on muscle tissue integrity. Kaufman et al. [41] showed that separating the muscle layer from a fracture site with a cellulose nitrate membrane impaired bone repair. This impairment occurred because the membrane only allowed molecules of 3.5–50 kDa to pass through while blocking cells. Utvag and colleagues [44] demonstrated in 1998, in a rat fracture model, that preserving the connection between the periosteum and the muscles significantly promoted fracture healing. A subsequent study from 2002 revealed that inadequate muscle coverage was associated with delayed fracture healing in rats, indicating that muscle defects can impede early bone repair [45]. Harry et al. [46] used a mouse tibial fracture model to compare the effects of muscle and skin tissue coverage of the injury site and the vascular density in both during healing. They found that although the skin tissue had a higher vascular density throughout the healing process, the presence of muscle tissue accelerated healing.
These animal studies’ results were confirmed through clinical treatment outcomes, showing that muscle integrity was critical for long-term functional recovery and quality of life improvement in patients with musculoskeletal injuries. A meta-analysis study comparing the long-term outcomes of quadratus femoris muscle pedicle bone flap transplantation with cannulated compression screw internal fixation versus AO cannulated compression screw internal fixation for femoral neck fractures in young adults demonstrated superior results in the group receiving the combined treatment. Specifically, this group exhibited higher fracture healing rates, better hip joint function scores, reduced incidences of avascular necrosis of the femoral head, and shorter fracture healing times [47]. In a systematic review on the therapeutic effect of myocutaneous flap transplantation in adult patients with femoral neck fractures, researchers compared the therapeutic effects among femoral neck fractures in 1022 patients from 20 studies, showing similar results: myocutaneous flap transplantation has a good effect with a low incidence of avascular necrosis and nonunion [48]. Although muscle flap transplantation can improve fracture healing and long-term treatment outcomes, the healing progress is limited by infection [49], flap necrosis, and donor site dysfunction [50]. Therefore, the use of tissue engineering materials as an alternative to muscle flap transplantation becomes particularly important.
The periodic mechanical load generated by muscle contractions drives bone regeneration
During bone regeneration, muscle acts as a ‘dynamic regulator’. It not only directly participates by secreting various bioactive factors but also influences bone repair through mechanical stimulation. Clinically, insufficient mechanical load on bones, often caused by muscle atrophy, has been observed to lead to osteoporosis and delayed healing. This is primarily due to the mechanical load exerted by muscle contractions on bones. Muscle activity generates periodic mechanical loads on bones via tendons, activating mechanoreceptors such as integrins [51] and primary cilia [52] on osteocytes.
Studies have shown that the mechanosensitive channels Piezo1 [53] and Piezo2 are crucial force sensors for bone development and osteoblast differentiation. The absence of Piezo1, or more severely, Piezo1 and Piezo2, in mesenchymal or osteoblast progenitor cells leads to multiple spontaneous fractures in neonatal mice. This occurs because osteoblast differentiation is inhibited and bone resorption increases. Piezo1 and Piezol2 transmit fluid shear stress and ECM stiffness signals, leading to Ca2+ influx that stimulates calcineurin and promotes osteogenic differentiation by inducing the NFATc1-YAP1-ß-catenin signaling pathway [54].
Muscle tissue supplies essential cytokines for bone repair
Muscle and bone development are closely interrelated, as they are two essential components of the motor system. Movement initiation relies on muscle contraction, while bones provide the mechanical leverage for force exertion. Bioactive factors exchanged in the muscle-bone microenvironment influence the growth and development of both tissues. Hamrick, for instance, proposed that growth factors secreted by muscles can directly stimulate bone formation.
Numerous studies have documented the regulatory effects of muscle-secreted cytokines on bone growth and development. This regulation, exerted by myofactors on the bones, is intricate. Certain myofactors positively influence bone development and synthesis. For example, skeletal muscles synthesize the cytokine irisin after exercise [55]. Xue et al. [56] discovered that in mice, irisin can stimulate osteoblasts and activate the bone morphogenetic proteins (BMP)/Smad pathway via the α5 receptor to enhance bone formation. Furthermore, Hu et al. [57] indicated that irisin protects against wear-particle-induced osteolysis by alleviating oxidative stress and inhibiting RANKL production in osteoclasts. Insulin-like growth factor 1 (IGF-1), vital for tissue growth and development, is primarily synthesized in the liver but has also been shown to be secreted by extrahepatic tissues, including skeletal muscles, under the influence of growth hormone [58, 59]. Banu et al. [60] revealed that IGF-1 overexpression in mice led to increased muscle mass, cortical bone area, and bone mineral content. Conversely, certain myokines, such as interleukins, have a detrimental impact on bone formation. IL-6 is a myokine known for its role in muscle-bone interaction. A clinical study conducted among postmenopausal women with osteopenia, treated with bisphosphonates and calcitriol, found an inverse relationship between baseline serum IL-6 levels and both handgrip strength and lumbar vertebral Bone Mineral Density [61, 62].
Bones can have a reactive effect on skeletal muscles
The secretion of active factors by osteoblasts, osteocytes, and skeletal muscle cells is a widely observed phenomenon. Wang et al. [63] demonstrated that BMSCs facilitate skeletal muscle cell proliferation primarily through the paracrine secretion of VEGF. Osteocalcin, a hormone secreted by osteoblasts, exerts its effects via a G-protein-coupled receptor and is negatively regulated by embryonic stem cell phosphatase (Esp) tyrosine phosphatase. Studies have shown that Esp−/− mice exhibited improved muscle quality, whereas Ocn −/− mice displayed impaired muscle function [64].
The application of tissue engineering materials in musculoskeletal repair
Hydrogel materials
Hydrogels are highly suitable materials for tissue engineering due to their hydrophilic polymer configuration, which enables them to retain substantial amount of water while closely mimicking the mechanical properties of human tissues [65]. Both natural and synthetic hydrogels are frequently employed as carriers for bioactive molecules, owing to their capacity for sustained release and their ability to avoid premature enzymatic degradation [66]. Hydrogels exhibit distinct applications based on their mechanical properties. For instance, high-hardness hydrogels are well-suited as scaffolds for bone regeneration, offering essential biomechanical support [67], while soft hydrogels are ideal as support for wound repair, providing minimally invasive injectability and adaptability to irregular injury sites [68, 69]. Consequently, hydrogels with adequate mechanical strength and sustained release of bioactive molecules find applications in soft tissue (e.g. muscles and skin) injury and bone regeneration and repair (Table 1).
Table 1.
The main materials used in hydrogels for bone and muscle regeneration and repair
| Hydrogel Component. | Other component(s) | Advantage(s) | Mechanical properties | Biodegradation rate | Drug release characteristics | Bone/Muscle | References |
|---|---|---|---|---|---|---|---|
| GelMA | Deferoxamine loaded poly(ε-caprolactone) (DFO@PCL) nanoparticle, manganese carbonyl (MnCO) nanosheets, and polylactide/hydroxyapatite (PLA/HA) matrix |
|
Compressive modulus: 0.90 ± 0.01 GPa Maximum compressive strength: 58.93 ± 1.46 MPa |
42.1 ± 3.81% on Day 21 in PBS at 37°C | 22.6 ± 0.68% within 1 day; Constant slow drug release kinetics beyond seven days | Bone | [85] |
| Water-soluble phosphocreatine-functionalized chitosan (CSMP) | MgO nanoparticles |
|
Compressive modulus: 26.3 ± 2.0 kPa Maximum compressive strength: 195.0 ± 18.3 kPa |
28 days in PBS at 37°C | Continuously release of Mg2+ over 28 days | Bone | [88] |
| Thermosensitive hydroxypropyl chitin hydrogel (HPCH) | Mesenchymal stem cells (MSCs), a 3D -printed poly (ε-caprolactone)/nano hydroxyapatite (PCL/nHA) scaffold |
|
Tensile modulus: 2.34 ± 0.10 MPa; Compressive modulus: 2.33 ± 0.27 MPa |
No details | No details. | Bone | [89] |
| β-sheet RADA16-grafted glucomannan self-assembly synthesized fiber glycopolymer hydrogels (GRgel) | Non-covalently composited with 3D-printed PCL/nHA scaffold |
|
Comparable to native PCL/nHA scaffolds | No details | No details. | Bone | [90] |
| GelMA/HAMA | BMSCs; NOIS, native-constituent osteogenic inorganic salt; 3D-printed PCL framework |
|
Compressive modulus: 1987.0 ± 61.1 kPa | Gradually degrades by enzymatic hydrolysis | No details | Bone | [91] |
| Chitosan/silk fibroin (CS) | Bone morphogenetic protein 2 (BMP-2)-functionalized MgFe-LDH nanosheets; platelet-derived growth factor-BB (PDGF-BB) |
|
LDH increases the mechanical property of the CS hydrogel | 50% is retained after 36 days | A relatively fast release of PDGF-BB, accompanied by a slower sustained release of BMP-2 | Bone | [79] |
| PEGylated poly (glycerol sebacate) (PEGS-NH2)/poly (γ-glutamic acid) (γ-PGA) | Rapamycin-loaded poly(diselenide-carbonate) nanomicelles (PSeR); |
|
No details | No details | The rapamycin release rate is proportional to the H2O2 concentration | Bone | [92] |
| GelMA | Bisphosphonates (BPs) grafted on the GelMA microspheres; Mg2+ |
|
No details | No details | Within 12 days; the BP release is fast, then slows down, and plateaus by Day 21 | Bone | [93] |
| Guanidine-hyaluronic acid (G-HA) | Demineralized bone matrix (DBM) |
|
Tensile modulus: Approximately 2 kPa Compressive modulus: Approximately 1.8–2 kPa |
No details | No details. | Bone | [94] |
| Gelatin | Hydrazide alginate |
|
Tensile modulus: 0.9 MPa | Only a small amount of hydrolysis by Day 7 | No details. | Bone | [95] |
| Sodium alginate (SA) | Montmorillonite (MMT) nanoparticles |
|
Compressive modulus: 13.76 ± 4.13 kPa | No details | Quick release in the first 3 h, slowly decreasing after 24 h, and then stabilizing | Bone | [96] |
| Gelatin powder | Dextran; NaIO4 |
|
No details | Remain intact with good stability by Day 7 | No details. | Muscle | [97] |
| Alginate | Calcium silicate and strontium carbonate |
|
Tensile modulus: 210 ± 30 kPa; Maximum compressive strength: 280 ± 10 kPa |
No details | Slow release over 28 days when soaked in PBS solution | Muscle | [98] |
| Methacrylic acid | Polyethylene glycol |
|
No details | The in vivo degradation rate was dependent on the molecular weight of the PEG-AC | No details. | Muscle | [99] |
| Chitosan/Gelatin (CS/Gel) | Polydopamine (PDA)-modified ceramic hydroxyapatite (PDA-hydroxyapatite, PHA) and PDA-modified barium titanate (PDA-BaTiO3, PBT) nanoparticles | No details. | No details | No details. | 1. Promotes M2 polarization of macrophages 2. Promotes osteogenesis and angiogenesis |
Bone | [100] |
| Gelatin | A conductive poly (ethylene dioxythiophene)/polystyrene sulfonate matrix and Ca/Mn co-doped barium titanate (CMBT) nanofibers as the piezoelectric filler | No details. | Maintained their size and shape by Day 21 | No details | 1. The scaffold creates a promising electroactive microenvironment, which can upregulate biological responses 2. Can promote cellular osteogenic differentiation in vitro and neo-bone formation in vivo |
Bone | [101] |
BMPs, members of the TGF-β superfamily, are crucial for the formation of bones and cartilage. Among them, BMP-2 is particularly effective in promoting bone formation and has been approved by the United States Food and Drug Administration for orthopedic applications [70–72]. J Johnson et al. developed a functionalized Polyethylene Glycol (PEG) hydrogel to mimic collagen peptides. This hydrogel forms cross-links with MMP-sensitive peptides containing cysteine residues. It was designed to sustainably release BMP-2 and antibacterial lysozyme, simultaneously preventing Staphylococcus aureus infection and repairing segmental bone defects in the mouse radius [73]. An injectable hydrogel loaded with BMP-6, designed by Ke-Hung Chien et al. [74] promoted biomineralization and facilitated periodontal regeneration of maxillary-molar defects in rats. Sun et al. [75] integrated a biphasic, demineralized, decellularized allogenic bone-hydrogel scaffold with a cell-based BMP-7 delivery system to regenerate osteochondral defects. Evidently, the BMP family is essential for bone repair and restoration. Bioactive factors secreted by skeletal muscles primarily mediate the activation of BMP release. Xue et al. [56] discovered that, in mice, irisin, a myofactor produced after exercise, exerts its effects on osteoblasts by engaging α5 receptors to activate the BMP/Smad pathway and facilitate bone formation. Hydrogels delivering IGF-1 [60], nerve growth factor (NGF) [76, 77], VEGF [78], and PDGF [79] have all demonstrated effectiveness in promoting bone repair. Banu et al. [60] observed that mice overexpressing IGF-1 exhibited significant increases in muscle mass, cortical bone area, and bone mineral content. Lv et al. incorporated functionalized magnesium iron layered double hydroxide (MgFe-LDH) nanoplates into a chitosan/silk protein (CS) hydrogel containing platelet-derived growth factor BB (PDGF-BB) to develop an injectable, smart, thermoresponsive hydrogel (CSP-LB). This innovative formulation facilitates rapid PDGF-BB release while ensuring sustained BMP-2 delivery, thereby enhancing bone regeneration [79].
Actively promoting muscle repair during bone regeneration enhances the effectiveness of muscle-derived biological factors in facilitating bone injury repair. Research has shown that hydrogels doped with angiogenic factors and BMP-2 can coordinate angiogenesis and osteogenesis [80, 81]. These bioactive factors are among the primary myofactors secreted by skeletal muscle. The delivery of biological products, such as microvascular fragments [7], growth factor-rich plasma [82], and vascular-derived extracellular matrix [83], has been shown to enhance the efficacy of BMP-2 in hydrogel systems for bone regeneration. Given that angiogenesis is a critical goal for muscle injury repair, developing a delivery system that facilitates integrated bone and skeletal muscle regeneration is essential. For the first time, Ramesh Subbiah et al. [9] utilized an injectable hydrogel system to deliver two growth factors to a complex composite injury model. This approach enabled sustained release of the factors, demonstrating their significant efficacy in promoting bone healing. The regenerating bone achieved 52% of the mechanical strength of intact bone when the release of VEGF and BMP-2 was modulated; however, no synergistic effect was observed in vitro. By adjusting the type and dose of the delivered growth factors (e.g. delivering the angiogenic factors VEGF and PDGF), the system achieved better bone healing in the composite skeletal muscle injury than with BMP-2 alone [8]. This finding suggests that hydrogel loading systems hold potential for integrated repair of bone and skeletal muscle injuries, underscoring the necessity of refining delivery system compositions to optimize the coordination of bone and muscle injury repair.
To promote osteogenesis, hydrogels designed to closely resemble the physiological composition of natural bones have been developed. Natural bones comprise ~30% organic matrix, primarily Type I collagen. The remaining 70% is the inorganic matrix, whose main component is hydroxyapatite. Incorporation of inorganic reagents such as laponite [84], hydroxyapatite [85], and bioactive glass into hydrogels is an effective strategy to mimic natural bones and enhance the hydrogel’s osteogenic potential. Some researchers combined hydroxyapatite, β-tricalcium phosphate microspheres, hydrogels, and recombinant BMP-2 into nanoparticles, achieving greater bone volume and mass in a rat spinal fusion model than the control group.
Cellular behaviors, such as differentiation and migration, are strongly influenced by the mechanical environment. Hydrogels possessing mechanical properties akin to natural bone offer significant advantages for musculoskeletal regeneration. Given the importance of mechanical strength in hydrogels, small crosslinkers, such as glutaraldehyde, genistein, and dopamine, have been traditionally incorporated to optimize the hydrogel’s function and mechanical properties. Choi et al. developed a hydrogel by incorporating inorganic particles into a hyaluronic acid hydrogel that was conjugated with phloroglucinol to deliver BMP-2. The cooperation between the two materials significantly enhanced the hydrogel’s mechanical strength. Their hydrogel was shown to promote osteogenic differentiation in vitro and facilitate new bone formation in cranial defects in vivo. However, dense network structures in cell-encapsulated hydrogels might hinder cellular diffusion and proliferation [86]. Wei et al. proposed an alternative scheme using a BMP-2-loaded soft hydrogel with a higher rigidity than that of bone marrow. This strategy enhanced the viability and function of endogenous mesenchymal stem cells (MSCs). MSCs were observed to proliferate in soft hydrogel and then differentiate into osteoblasts in the interface between the hydrogel and the rigid surface [87]. The application of soft hydrogels in osteogenic repair offers theoretical potential for integrated bone and skeletal muscle regeneration.
Electrospun fiber materials
Electrospun fibers facilitate cell adhesion and differentiation
Nanofibers produced using electrospinning technology replicate characteristics of the natural ECM, providing a favorable environment for cell survival and behavior [102]. Electrospun fibrous membranes influence osteoblast proliferation and differentiation by mimicking surface roughness, dynamic compressive strain, and layering, thereby replicating the bone’s natural growth state, which is characterized by its unique layers and structure. Various rough surface textures increase the overall available surface area, enhancing cell adhesion and proliferation [37]. Some researchers isolated decalcified ECM from bones and directly converted it into nanofibers using electrospinning. Decalcified ECM, being a natural component of osteoblasts’ extracellular environment, yields fibers that closely mimic its composition and structure, providing an excellent simulation. Researchers utilized electrospinning to combine the benefits of polylactic acid (PLA) and chitosan in creating a dual-component scaffold with a core-shell and island-like structure. They demonstrated, by cultivating pre-osteoblast cells on the scaffold, that the CS-enriched outer nanofiber layer and the nanoscale rough surface effectively balanced the hydrophilicity and hydrophobicity of the material. This combination enhanced mineralization and promoted cell adhesion and growth (Figure 5a) [103].
Figure 5.

Electrospun fibers play different roles in bone and skeletal muscle injury repair. (a) Promote cell adhesion and differentiation. Alkaline phosphatase activity was enhanced by coating chitosan onto the fiber surface and forming ‘island-like’ protrusions that provide a more suitable interface. Adapted from [103] with permission. (b) The structure and mechanism of action of composite fibers, the construction of bio-inspired composite scaffolds, and their microenvironment-responsive immunomodulation and neuroregeneration effects. Adapted from [106] with permission. (c) A multifunctional scaffold can kill bacteria, recruit endogenous mesenchymal stem cells, and maintain a mild photothermal effect, thereby promoting bone regeneration. Adapted from [110] with permission. Copyright © 2023, American Chemical Society, licensed under CC BY 4.0
Electrospun fiber materials are also extensively applied in soft tissue (muscle) injury repair. Electrospun materials facilitate cell adhesion, which is essential for muscle regeneration and repair. Researchers selected PCL fiber membranes of appropriate diameter and coated them with mussel-inspired poly(norepinephrine) (pNE). A combination of fibers with smaller diameters and larger specific surface areas, along with pNE-functionalized membranes, creates an ideal microenvironment for muscle cells’ viability and functionality both in vitro and in vivo. The newly formed muscle layer integrated seamlessly with the fiber membrane and surrounding tissue, achieving satisfactory mechanical strength. Electrospun fibers can be engineered to match physiological tissue stiffness and promote muscle cell proliferation. Studies have demonstrated that matrix stiffness critically influences stem cell differentiation and muscle cell proliferation. Researchers have integrated electrospun fibers with adipose stem cells to support moderate muscle reconstruction in severe VML injuries [104].
Electrospun fiber materials can entrap pharmaceutical drugs
Electrospinning technology can incorporate pharmaceuticals into biodegradable fibers, providing precise control over drug release. Mohammed et al. [105] developed a layered PCL/GEL co-electrospun membrane by combining substance P (SP)-loaded GEL fibers and simvastatin (SIM)-loaded PCL fibers. This material facilitated rapid SP release alongside a prolonged, controlled drug release over a month. This combination significantly enhanced cell homing, angiogenesis, and osteogenic differentiation. Black phosphorus (BP), a novel 2D crystalline material, possesses a unique layered structure and exceptional performance, including outstanding biocompatibility and high energy conversion efficiency. Using micro-sol–gel electrospinning, researchers incorporated BMP-2-modified BP nanoplatelets onto Poly-L-lactic acid (PLLA) fibers, devising a biologically driven, staged bone regeneration strategy. BMP-2 facilitates the recruitment of osteogenic precursor cells and their differentiation into mature osteoblasts, while the sustained release of phosphates from BP promotes hydroxyapatite mineralization and its 3D deposition on the fiber scaffold [72]. Xi and colleagues designed an innovative immunoregulatory approach based on pH sensitivity to enhance neural tissue repair. Their methodology involved deploying electrospun fiber scaffolds capable of microenvironmental detection in a rodent acute spinal cord trauma model. These specialized fibers exhibited rapid reactivity to the acidic conditions present in injured tissues, initiating the swift release of IL-4-encoded liposomal complexes. This mechanism effectively suppressed pro-inflammatory cytokine production while enhancing the neural differentiation potential of MSCs in controlled environments. The system employed a unique micro-sol–gel architecture with a core-shell configuration to ensure sustained delivery of NGF. Experimental results demonstrated that the immunomodulatory scaffold substantially modified immune cell population distributions, attenuated early-phase inflammatory processes, and diminished fibrotic tissue deposition. Furthermore, the intervention stimulated vascular network formation and neuronal differentiation in the lesion area, significantly improving functional outcomes (Figure 5b) [106].
Electrospun fiber-based drug systems for muscle tissue repair can be optimized by regulating drug release rates and patterns. Somiraa S. et al. [107] designed electrospun poly(ester amide) (PEA) nanofiber mats for the targeted delivery of fibroblast growth factor 9 (FGF9), a mural cell-specific factor. The delivery system’s efficacy was validated by applying FGF9/FGF2-loaded PEA mats onto the chorioallantoic membrane of chicken eggs, where enhanced angiogenesis was visualized using 3D power Doppler micro-ultrasound imaging. FGF9-loaded PEA mats were implanted on the tibialis anterior muscles of hind-limb ischemic mice, effectively delivering FGF9 to the injury site. This fostered the development of a new microvascular network with enhanced wall cell coverage within 28 days post-injury. Additionally, FGF9-treated muscles in the mice demonstrated near-normal muscle fiber size, reduced fibrosis by myofibroblasts, and improved mobility. The synergistic effect of multiple drugs is often key to single-tissue regeneration. It inspired us to consider whether an appropriate stratified drug delivery design can solve the integration problems at the soft-hard interface and the differences between osteogenesis and myogenesis.
Improved enhancements for electrospun fiber materials
Recent advancements have endowed electrospun materials with ‘smart’ properties, making them increasingly suitable for bone regeneration and repair [37]. Stimulus-responsive electrospun materials can adapt their volume or wettability in response to environmental changes like temperature fluctuations or infection-induced alterations. These dynamic properties enable the customization of smart material functionalities, including on-demand drug release and the regulation of cellular behavior for targeted therapeutic outcomes. For example, researchers utilized bi-electrospinning to produce a miscible nanofiber composed of polyvinyl acetate (PVAc) and PLA. Dynamic mechanical analysis identified two temperature-responsive phase transitions within the interwoven PLA/PVAc structure (Figure 5c) [108]. Some materials exhibit sensitivity to specialized environments. Liu et al. Liu et al. developed a functional 3D-printed material by integrating electrospinning with layer-by-layer 3D printing, enabling manipulation of the bone immune environment through scaffold architecture to facilitate bone regeneration. Electrospun PLLA fibers (EF) were fabricated into scaffolds, including a microfiber (M-EF) variant. Subsequently, liquid PCL was extruded through a 3D printer to form cylindrical structures (in vivo: 20 mm diameter, 1 mm thickness; ex vivo: 5 mm diameter, 1 mm thickness). Scaffold ink was deposited layer-by-layer onto the M-EF scaffold, forming the final 3D EF structure. Essentially, the structure was constructed by overlaying alternating layers of PCL scaffolds and PLLA fibers. This process was repeated until a six-layer PCL and five-layer PLLA 3D EF scaffold, termed ‘3D-M-EF’, was achieved. The scaffold was shown to improve the immune microenvironment and facilitate bone formation and angiogenesis in vivo. Furthermore, it upregulated integrin β1 expression and activated the PI3K/AKT signaling pathway, mechanisms linked to M2 polarization [109]. Zhang et al. doped BP nanosheets (BP NSs) into electrospun PCL nanofibers to endow them with excellent near-infrared (NIR) responsiveness. Then, Apt19S was modified on the scaffold surface to selectively recruit MSCs to the injured site. Under the photothermal effects of the NIR irradiation, upregulated heat shock proteins and accelerated biodegradation of the BP NSs promoted the osteogenic differentiation and biomineralization of the recruited MSCs [110]. Additional responsive materials are shown in Table 2.
Table 2.
Various categories of responsive materials.
| Response pattern | Construction structure | References |
|---|---|---|
| Shape | Dexamethasone (Dex)/PLMC composite nanofibers | [111] |
| Shape | Biodegradable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) was incorporated to form ultrafine composite fibers through electrospinning | [112] |
| Shape | The amphiphilic composite comprised a poly(lactide-co-glycolide)-b-poly (ethylene glycol)-b-poly(lactide-co-glycolide) (PELGA) matrix | [113] |
| Shape | The generation of composite nanofibers of nanohydroxyapatite (HAp)/PLMC with diverse HAp proportions was achieved by incorporating HAp into a shape memory copolymer, PLMC, via co-electrospinning | [114] |
| Magnetic | Polyvinyl alcohol (PVA)/Chitosan (CS)/Fe3O4 | [115] |
| Infection-responsive | Antimicrobial agents on the surface of the PCL nanofibrous scaffold can generate an infection-responsive guided bone regeneration/guided tissue regeneration (GBR/GTR) membrane | [116] |
A significant limitation of electrospun scaffolds lies in their inherently weak mechanical properties, which restricts their clinical applicability. Nicholas et al. enhanced the scaffolds’ mechanical stiffness and strength by integrating 3D-printed meshes. Specifically, a PLA mesh was 3D-printed onto an electrospun scaffold composed of gelatin and PCL at a 60:40 ratio. The mesh was printed at strut intervals of either 0.6 or 0.8 cm. This reinforcement improved the scaffold’s mechanical properties and demonstrated biocompatibility in rat skull defect models [117]. Other researchers developed a dual-phase PCL/hydroxyapatite (3D) nanofiber scaffold using a thermally induced self-assembly technique, conferring enhanced mechanical strength for bone tissue regeneration [118]. Nafisa et al. demonstrated the fabrication of highly aligned PCL mats with collagen-like fiber architecture via near-field electrospinning (NFE). This technique promotes cell attachment and directional growth while enabling precise geometric control. The ability of NFE to construct complex, load-bearing structures paves the way for creating tissue-engineered scaffolds with heterogeneous features, such as bone dressing surfaces, and supports the development of engineered gradients for advanced tissue regeneration.
NFE enables the precise fabrication of geometrically controlled features, allowing for the integration of complex, load-bearing structures that are crucial for additive manufacturing of tissue-engineered scaffolds. This technique offers significant potential for creating heterogeneous structures, such as bone dressing surfaces, and supports the development of tissue-engineered gradients to meet specific biomechanical and biological requirements. By optimizing biomimetic ECM design, incorporating appropriate pharmaceuticals, tailoring response patterns, and improving mechanical strength, electrospun materials can more effectively promote bone and muscle tissue regeneration. The characteristics of electrospun fiber materials highlight their considerable potential for integrated musculoskeletal repair.
Conductive materials
Bioelectricity is a fundamental component of the body’s physiological processes. At the cellular level, most mammalian cells exhibit a stable and long-term voltage potential across their membranes, known as the membrane potential (Vm). This potential typically ranges from ~−10 to −90 mV, depending on the cell type. The membrane potential is critical in regulating processes such as signal transduction, energy conversion, and intercellular communication. Action potentials determine cellular excitability, particularly in neurons and muscle cells. Bioelectrical signals are essential for nerve signal transmission, synchronized cardiomyocyte contraction, and skeletal muscle contraction. Endogenous piezoelectricity, observed in biomacromolecules with low symmetry, is thought to be intricately linked to tissue growth and remodeling, particularly bone regeneration [119]. Electrophysiology fosters bone regeneration and repair by creating beneficial electrical microenvironments. Electrical stimulation directly influences bone-related cells, including osteoblasts, osteocytes, and osteoclasts. These electrical signals regulate the metabolism and proliferation of these cells, thereby enhancing bone regeneration. Furthermore, electrophysiological stimulation enhances vascular dilation, permeability, and increases blood flow at bone defect sites—critical factors for angiogenesis. Electrophysiology plays an equally vital role in skeletal muscle signal transduction. Its integration with bone regeneration presents novel therapeutic possibilities for combined bone and muscle repair [100].
The remarkable regenerative capacity of bones is significantly influenced by endogenous electrical signals inherent to bone tissues. Under mechanical stress, compressed bone regions become electronegative, leading to bone resorption, while stretched regions become electropositive, promoting bone formation. Additionally, tissue damage induces the damage potential, which generates an endogenous current that aids wound healing. Current designs of piezoelectric materials for bone regeneration and repair primarily focus on promoting osteogenesis by osteoblasts and inhibiting bone resorption by osteoclasts. Several studies have proposed conductive scaffolds composed of piezoelectric cartilage-decellularized ECM and piezoelectric conductive modified gelatin. The scaffold’s piezoelectricity is induced by modifying the pore surface with diphenylalanine, while its conductive properties are achieved by incorporating poly(3,4-ethylenedioxythiophene). In vitro experiments have shown that BMSCs undergo biphasic division during differentiation. The positive charges accumulated on the upper layer of the scaffold attract BMSCs, facilitating their upward migration and chondrogenic differentiation. Meanwhile, the negative charges on the lower layer induce osteogenic differentiation of BMSCs (Figure 6a) [120].
Figure 6.
Application of conductive materials in bone and skeletal muscle injury repair. (a) Schematic diagram of a biodegradable piezoelectric conductive scaffold for bone and cartilage defect repair and regeneration. Adapted from [120] with permission. Copyright © 2022 Wiley‐VCH GmbH., licensed under CC BY 4.0. (b) Design strategy and chemical illustration of piezoelectric CG/PHA/PBT hydrogel for musculoskeletal regeneration. Adapted from [100] with permission
Wu et al. developed an innovative piezoelectric hydrogel scaffold for bone tissue engineering by integrating PDA-modified piezoelectric barium titanate (PDA-BaTiO3, or PBT) and hydroxyapatite nanoparticles into a chitosan/gelatin hydrogel. This chitosan/gelatin/hydroxyapatite/barium titanate (BTO)-based piezoelectric hydrogel scaffold regulates macrophage polarization, enhances osteogenic differentiation and angiogenesis, and accelerates bone regeneration and remodeling (Figure 6b) [100].
Polyetheretherketone (PEEK) exhibits favorable mechanical adaptability and is widely utilized in repairing maxillofacial defects. However, its inherent osteogenic properties necessitate improvement. Li et al. leveraged the piezoelectric effect of BTO, utilizing low-intensity pulsed ultrasound (LIPUS) activation and PDA mediation, to engineer an ultrasound-responsive PEEK composite (PDA@BTO-modified SPEEK, PBSP) for enhancing maxillofacial bone defect restoration. PBSP exhibits enhanced hydrophilicity, which promotes cell viability and adhesion. Additionally, by harnessing the piezoelectric properties of BTO, PBSP achieves a piezoelectric coefficient comparable to that of cortical bone. Notably, PBSP generates stable electrical signals when stimulated by LIPUS, effectively accelerating osteogenic differentiation of osteoblasts [121].
Wu et al. also introduced piezoelectric materials and silver nanoparticles into hydrogels to fabricate a dual-layered piezoelectric hydrogel with antibacterial properties and enhanced mechanical responsiveness, promoting effective bone and cartilage injury repair. The introduction of sulfur (S) atoms into functional piezoelectric BTO to create sulfur-doped BTO (SDBTO) significantly enhances its piezoelectric catalytic performance, enabling effective therapeutic effects on bone defects infected with S. aureus and promoting osteogenesis. SDBTO-1 is activated by ultrasound to generate piezoelectric signals that effectively promote BMSCs’ osteogenic differentiation. This differentiation is achieved by upregulating the TGF-β signaling pathway, greatly improving the osteogenic microenvironment and facilitating musculoskeletal regeneration.
The application of piezoelectric materials in musculoskeletal regeneration is gradually becoming a new research hotspot. Studies have suggested that various treatments with piezoelectric materials in animal models of VML injury can enhance muscle function compared to untreated animals. These findings indicate that the combination of cell-free biomaterials and cellular components represents the most effective approach to date for improving functional recovery following VML injury. Regenerative therapies incorporating piezoelectric materials may greatly facilitate the recovery of musculoskeletal function. Researchers from Xi’an Jiaotong University discovered that nano-gold-silver alloy materials can significantly promote skeletal muscle regeneration. Furthermore, their study revealed that nano-alloy particles regulated skeletal muscle differentiation by activating the p38α MAPK signaling pathway. It was demonstrated in vivo that these materials substantially enhance muscle fiber and capillary formation within the defect area, leading to successful skeletal muscle regeneration [122].
Although the application of piezoelectric materials in musculoskeletal regeneration is still in the research phase, these preliminary results suggest their potential as effective strategies for treating large-volume skeletal muscle loss. Future research should focus on optimizing material performance and exploring their potential for clinical applications.
Researchers from Tomsk Polytechnic University, Russia, have developed a novel material that promotes the regeneration of bone, skin, and nerve tissues through surface treatment with dinitrogen chemicals and the promotion of osteoblast growth on piezoelectric polyhydroxybutyrate scaffolds. Moreover, the synergistic use of piezoelectric materials in both soft and hard tissues provides an opportunity for the integrated repair of bones and skeletal muscles. Some researchers have constructed Janus nanofiber scaffolds with piezoelectric properties and bionic collagen fiber arrangement to promote the simultaneous healing of tendons and bones. Double-layer fibers of polylactic acid/zinc oxide and polylactic acid/bismuth titanate were prepared by electrospinning, with their direction controlled by the spinning speed. The bionic fiber arrangement endows the scaffold with significant tensile and suture-retention strength, meeting the mechanical requirements for tendon-bone healing. Integrating ZnO and BTO nanoparticles into the PLLA matrix produced excellent piezoelectric responses, respectively inducing tendon and osteogenic differentiation [36].
Future perspective
Our comprehensive summary of the basic structure of bones and skeletal muscles, their repair processes, and existing tissue engineering materials revealed common challenges in current integrated muscle-bone repair attempts:
Repair difficulties due to tissue heterogeneity: Muscles and bones differ significantly in structure, mechanical properties, and regeneration mechanisms. Muscles require elasticity and contractility, whereas bones need high rigidity and load-bearing capacity. Integrated repair demands simultaneously meeting the unique requirements of both tissue types—a challenge for current materials.
Challenges in simulating the muscle-bone interface with current tissue engineering materials: (i) Artificial materials struggle to replicate the gradual change in mechanical properties found at the natural muscle-bone interface; (ii) Scaffolds often lack the necessary factors and seed cells to simulate natural biological activity to simultaneously promote the regeneration of both muscle and bone tissues.
These material design limitations—particularly regarding mechanical property matching at the soft-hard tissue interface, regulating biomaterial degradation rates, and biocompatibility issues—pose considerable challenges for preclinical studies and their subsequent clinical translation.
Therefore, future tissue engineering material designs for integrated muscle and bone repair should focus on the following aspects: (a) develop carrier materials with a gradient layering design to facilitate effective mechanical transduction at the muscle-bone interface; (b) employ a combined and coordinated approach using cytokines and seed cells to support the regeneration of various tissues at different interfaces; (c) utilize modern programming to develop precise digital designs that promote the directional differentiation of stem cells, thereby addressing the tissue heterogeneity at the muscle-bone interface.
Based on existing technologies, we propose the following prospects for the three elements of tissue engineering.
Cells
Seed cell selection is crucial for integrated musculoskeletal repair. BMSCs, muscle-derived progenitor cells (including muscle progenitor cells and satellite cells), and blood vessel-derived endothelial cells all play significant roles in this repair process. The layered arrangement of cells is conducive to their integrating at the musculoskeletal interface.
A team from the Shanghai Institute of Ceramics utilized multi-cellular 3D printing technology to layer tendon stem/progenitor cells and BMSCs. Together with manganese silicate nanoparticles, they constructed a gradient scaffold mimicking the tendon-bone interface. This design promoted bidirectional osteogenic and myogenic differentiation, regulated M2-type macrophage polarization by releasing Mn2+, inhibited inflammation, and enhanced tissue integration [123].
Other researchers have devised a minimally invasive treatment involving injecting a composite micro-tissue containing C2C12 poly (lactic-co-glycolic acid) porous microspheres and HUVEC poly (ethylene glycol) hollow microrods (PEG-HMs). These injections exhibited significant myogenic capacity, promoted the viability and function of skeletal muscle stem cells, rebuilt the vascular network, and facilitated ECM establishment [112].
Another way to address this problem is to control directed stem cell differentiation at various sites, made possible by digital light processing bioprinting technology. This process precisely replicates the complex microstructure of bone tissue. Subsequent long-term directed cultivation in vivo and in vitro leads to differentiation into various bone marrow cells, including blood, immune, and vascular endothelial cells, chondrocytes, osteoblasts, adipocytes, and osteoclasts. The resulting product has good mechanical properties (Young’s modulus in the MPa range, similar to cancellous bone), topological structure similar to bone (a loose, porous micro-nano structure), and large size (centimeter level), making it a functional bone-like organ. The organ-like scaffold showed strong repair ability in bone defect models [124].
The main issue addressed by seed cell selection is the differences in cell types and their differentiation directions at the muscle, interface, and bone surfaces. The layered design of selected seed cells effectively simulates these differences at the muscle-bone interface. Future developments in muscle-bone injury repair should focus on the cell-oriented differentiation capabilities provided by digital programming.
Scaffolds
The inherent differences in the natural configurations of bone and muscle tissues underscore the critical importance of designing scaffold materials that meet the distinct mechanical requirements of both tissue types. Specifically, scaffolds must provide sufficient hardness for bone tissue development and flexibility for muscle tissue regeneration, necessitating effective integration of both properties at the interface. Bionic 3D printing provides a promising solution for creating gradient scaffolds. 3D bioprinting has emerged as a multifunctional biomanufacturing technology capable of precisely controlling the composition, spatial distribution, and structure of the produced bionic tissue structures. This allows for effective mimicry of the characteristics and biological functions of the target tissues and organs. Therefore, 3D bioprinting could effectively replicate the complex structures of natural muscle and bone tissues. However, 3D printing design for musculoskeletal integration also has notable limitations. First, 3D printing is restricted to producing scaffolds with fixed geometric shapes, which cannot adapt to the dynamic changes during tissue regeneration. Second, the release of growth factors in 3D-printed constructs is predominantly driven by passive diffusion, making it challenging to achieve spatially and temporally controlled release. Additionally, 3D printing still struggles to mimic the dynamic mechanical properties of natural tissues, particularly the mechanical stress transduction at the tendon-bone interface [125].
Researchers also utilized extrusion 3D printing technology to fabricate nano-polylactic-co-tris(methylcarbonate) (PLMC) scaffolds that incorporated PDA nanoparticles as the nano-engineering material. These 3D-printed scaffolds demonstrated excellent (>99%) and rapid (<30 seconds) shape recovery under NIR irradiation. Compared with pure PLMC, the PLMC-PDA composite significantly enhanced alkaline phosphatase (ALP) secretion and mineral deposition, presenting a markedly higher in vitro osteogenic potential [126].
4D bioprinting, a recently developed technology based on 3D bioprinting, addresses these challenges and simulates the dynamic changes of native tissues more accurately [127]. 4D printing can dynamically align with the evolution of tissue interfaces, such as the stiffness gradient changes during bone defect healing. Some researchers employed 4D printing technology to incorporate BP nanosheets and osteogenic peptides into β-tricalcium phosphate/polylactic-co-tris(methylcarbonate) nanocomposite materials, constructing photothermal-responsive, shape-memory scaffolds for bone tissue engineering. The scaffold temperature rapidly increased to 45°C upon exposure to NIR irradiation, enabling reconfiguration of its shape for easier implantation and precise fitting of irregular bone defects. Once implanted, the scaffold temperature promptly decreased to 37°C, exhibiting mechanical properties comparable to human cancellous bone. Bone formation at the defect site was improved through the controlled release of peptides from the scaffold [128].
Researchers successfully utilized 4D printing to print various bionic muscle models, derived from 4D nanostructures, that possess adjustable mechanical properties. These structures responded to electrical signals and demonstrated good biocompatibility [129]. 4D printing can also achieve a responsive release of biological factors and facilitate multi-stage responsive design [130, 131]. A gradient mechanical design of 4D printed scaffolds could effectively address the unique mechanical stress transmission at the muscle-bone interface, a challenge that traditional scaffolds have failed to achieve. Electroactive polymers (EAPs) are a new type of smart material that can undergo shape changes when stimulated by an electric field. These polymers possess special electrical and mechanical advantages. Compared with traditional piezoelectric materials, EAPs are lightweight, have high driving efficiency, and have good seismic performance. Artificial muscle actuators based on combined EAPs and 4D printing have strong strain performance and are one of the most promising biomimetic materials [101].
4D printed engineered blood vessels are also of great significance for integrated musculoskeletal repair. Rana et al. developed programmable bioinks to promote a dynamic presentation of VEGF to guide vascular morphogenesis in 3D bio-printed constructs. Compared with untreated samples, treated samples showed a 1.35-times higher vascular density, 1.54-times higher branch density, and 2.19-times higher average vascular length [132].
The focus of improved scaffolds still lies in integrating soft and hard tissues at their interface and the issue of mechanical force transmission. 4D-printed and multi-scale biomimetic gradient scaffolds can partially resolve these challenges.
Bioactive factors
Biologically active and angiogenic factors are widely regarded as effective treatments for promoting tissue angiogenesis. Factors such as VEGF are continuously secreted in ischemic muscle tissue, promoting angiogenesis and increasing blood vessel density at the injury site. The strategic combination of BMP-2 and PDGF-BB is essential for musculoskeletal regeneration and repair. Ma Y et al. [133] constructed therapeutic small extracellular vesicles (t-sEVs) loaded with VEGF-A and BMP-2. When encapsulated in a custom injectable polyethylene glycolized polyglycerol sebacate acrylate (PEG-A) hydrogel, these t-sEVs demonstrated excellent bone regeneration of critical-sized defects in rat femurs. Fitzpatrick V et al. [134] integrated 3D-printed macroporous scaffolds with BMP-2, VEGF, and NGF. They found that this combination could promote the regeneration of both soft and hard tissues, highlighting the importance of using multiple factors in integrated muscle and bone repair. Different growth factors exert varying biological effects at different interfaces of the musculoskeletal system. Therefore, the stratified design of biological factors plays a crucial role in directing the differentiation of stem cells at these various interfaces. Utilizing the optimized decellularization vacuum aspiration device method, researchers prepared a book-shaped decellularized interstitial matrix (O-BDEM). Subsequently, they fused collagen-binding peptides (CBP) to the N-terminus of BMP-2, TGF-β3, and Growth Differentiation Factor-7 to create recombinant growth factors (CBP-GFs). These were then attached to O-BDEM to fabricate a novel scaffold (CBP-GFs/O-BDEM) with superior biological activity for inducing stem cells to simultaneously enter the osteogenic, chondrogenic, and tendonogenic lineages [135].
The developments in bioactive factors aim to address the requirements for different factors at various interfaces. Layered design and the combined use of several factors help address this problem, but further research in this direction is needed.
Conclusions
As our understanding of the interaction between bone and muscle advances, we have witnessed a growing emphasis on integrative bone and muscle tissue engineering. While a solid foundation exists in organ engineering materials for musculoskeletal tissue regeneration, the development of integrated bone-muscle engineering materials remains in the exploratory phase. Several promising designs have made progress toward integrated repair; however, persistent challenges require further refinement. This review aimed to describe the structures and functions of bones, muscles, and their interactions. It highlighted the indispensable significance of both tissues in musculoskeletal regeneration and repair. Furthermore, it presented a systematic overview of three key tissue engineering material categories used in muscle and bone regeneration. Based on the reviewed data, we proposed new directions for designing novel tissue engineering materials that could facilitate integrative bone-muscle regeneration and repair.
Contributor Information
Yesheng Jin, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China.
Yixue Huang, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China.
Jia Wang, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China; School of Life Science, Soochow University, No. 199 Ren ai Road, Suzhou 215123, Jiangsu, China.
Xinfeng Zhou, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China.
Jianan Chen, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China.
Wenge Ding, Department of Traumatic Orthopaedics, Third Affiliated Hospital of Soochow University, Soochow University, No. 185 Juqian Road, Changzhou 213003, Jiangsu, China.
Zhihao Jia, Cambridge-Suda Genomic Resource Center, Suzhou Medical College, Soochow University, No. 199 Ren ai Road, Suzhou 215000, Jiangsu, China.
Yong Xu, Department of Orthopaedics, The First Affiliated Hospital of Soochow University, Orthopedic Institute, MOE Key Laboratory of Geriatric Diseases and Immunology, Suzhou Medical College, Soochow University, No. 899 Pinghai Road, Suzhou 215000, Jiangsu, China.
Author contributions
Yesheng Jin (Conceptualization [equal], Writing—original draft [equal], Writing—review & editing [equal]), Yixue Huang (Conceptualization [equal], Writing—original draft [equal], Writing—review & editing [equal]), Jia Wang (Conceptualization [equal], Writing—original draft [equal], Writing—review & editing [equal]), Jianan Chen (Writing—original draft [equal]), Xinfeng Zhou (Writing—review & editing [equal]), Wenge Ding (Funding acquisition [equal], Project administration [equal]), Zhihao Jia (Funding acquisition [equal], Project administration [equal], Writing—review & editing [equal]), Yong Xu (Conceptualization [equal], Funding acquisition [equal], Project administration [equal], Writing—review & editing [equal])
Declaration of competing interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Funding
This study was supported by the National Natural Science Foundation of China (82072476), the Natural Science Foundation of Jiangsu Province (BK20230494) and Gusu Innovation and Entrepreneur Leading Talents project (ZXL2023204), National High-level Young Talent Program (KS24700124), Jiangsu Specially Appointed Professor Program (SR24700123), Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), the Project of MOE Key Laboratory of Geriatric Diseases and Immunology (No. JYN202504).
References
- 1. Cao M, Sheng R, Sun Y, Cao Y, Wang H, Zhang M. et al. Delivering microrobots in the musculoskeletal system. Nanomicro Lett 2024;16:251. 10.1007/s40820-024-01464-8. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 2. Li J, Zhang F, Lyu H, Yin P, Shi L, Li Z. et al. Evolution of musculoskeletal electronics. Adv Mater 2024;36:e2303311. 10.1002/adma.202303311. [DOI] [PubMed] [Google Scholar]
- 3. Vos T, Abajobir AA, Abate KH, Abbafati C, Abbas KM, Abd-Allah F. et al. Global, regional, and national incidence, prevalence, and years lived with disability for 328 diseases and injuries for 195 countries, 1990–2016: a systematic analysis for the global burden of disease study 2016. Lancet 2017;390:1211–59. 10.1016/s0140-6736(17)32154-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 4. Yelin E, Weinstein S, King T. The burden of musculoskeletal diseases in the United States. Semin Arthritis Rheum 2016;46:259–60. 10.1016/j.semarthrit.2016.07.013. [DOI] [PubMed] [Google Scholar]
- 5. Ruehle MA, Krishnan L, Vantucci CE, Wang YY, Stevens HY, Roy K. et al. Effects of BMP-2 dose and delivery of microvascular fragments on healing of bone defects with concomitant volumetric muscle loss. J Orthop Res 2019;37:553–61. 10.1002/jor.24225. [DOI] [PubMed] [Google Scholar]
- 6. Zheng K, Bai J, Yang H, Xu Y, Pan G, Wang H. et al. Nanomaterial-assisted theranosis of bone diseases. Bioact Mater 2023;24:263–312. 10.1016/j.bioactmat.2022.12.014. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 7. Ruehle MA, Li M-TA, Cheng A, Krishnan L, Willett NJ, Guldberg RE. Decorin-supplemented collagen hydrogels for the co-delivery of bone morphogenetic protein-2 and microvascular fragments to a composite bone-muscle injury model with impaired vascularization. Acta Biomater 2019;93:210–21. 10.1016/j.actbio.2019.01.045. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 8. Subbiah R, Ruehle MA, Klosterhoff BS, Lin ASP, Hettiaratchi MH, Willett NJ. et al. Triple growth factor delivery promotes functional bone regeneration following composite musculoskeletal trauma. Acta Biomater 2021;127:180–92. 10.1016/j.actbio.2021.03.066. [DOI] [PubMed] [Google Scholar]
- 9. Subbiah R, Cheng A, Ruehle MA, Hettiaratchi MH, Bertassoni LE, Guldberg RE. Effects of controlled dual growth factor delivery on bone regeneration following composite bone-muscle injury. Acta Biomater 2020;114:63–75. 10.1016/j.actbio.2020.07.026. [DOI] [PubMed] [Google Scholar]
- 10. Yim GH, Hardwicke JT. The evolution and interpretation of the Gustilo and Anderson classification. J Bone Joint Surg 2018;100:e152. 10.2106/JBJS.18.00342. [DOI] [PubMed] [Google Scholar]
- 11. Wildemann B, Ignatius A, Leung F, Taitsman LA, Smith RM, Pesántez R. et al. Non-union bone fractures. Nat Rev Dis Prim 2021;7:57. 10.1038/s41572-021-00289-8. [DOI] [PubMed] [Google Scholar]
- 12. Testa S, Fornetti E, Fuoco C, Sanchez-Riera C, Rizzo F, Ciccotti M. et al. The war after war: volumetric muscle loss incidence, implication. Current Therapies and Emerging Reconstructive Strategies, a Comprehensive Review Biomedicines 2021;9:564. 10.3390/biomedicines9050564. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 13. Zalavras CG, Patzakis MJ, Holtom PD, Sherman R. Management of open fractures. Infect Dis Clin N Am 2005;19:915–29. 10.1016/j.idc.2005.08.001. [DOI] [PubMed] [Google Scholar]
- 14. Yang R, Wang Z, Huang W, Zhao Y, Xu L, Yu S. A suitable option for Gustilo and Anderson grade III injury. Med Sci Monit 2016;22:3018–24. 10.12659/msm.896009. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 15. Deng L, Yu A, Qi B, Lei J, De Souza C, Zhu S. et al. The Masquelet technique combined with the muscle flap for use in emergency management of acute Gustilo type III trauma of the lower limb with segmental bone loss:case series. Int J Surg 2020;81:85–93. 10.1016/j.ijsu.2020.07.013. [DOI] [PubMed] [Google Scholar]
- 16. Abdou SA, Stranix JT, Daar DA, Mehta DD, McLaurin T, Tejwani N. et al. Free tissue transfer with distraction osteogenesis and Masquelet technique is effective for limb salvage in patients with Gustilo type IIIB open fractures. Plastic & Reconstructive Surgery 2020;145:1071–6. 10.1097/prs.0000000000006696. [DOI] [PubMed] [Google Scholar]
- 17. Maitani K, Tomita K, Taminato M, Kubo T. Scarless Total breast reconstruction with a fat-augmented latissimus dorsi flap. Plast Reconstr Surg Glob Open 2021;9:e3887. 10.1097/GOX.0000000000003887. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 18. Song B, Chen J, Han Y, Li Y, Su Y, Guo S. Reconstruction of complex defects of lower extremities using thinned free muscle flaps. Aesth Plast Surg 2016;40:519–25. 10.1007/s00266-016-0641-x. [DOI] [PubMed] [Google Scholar]
- 19. Tong D, Liu Y, Wu LW, Zhu S, Zhu J, Chen S. Free groin flap for aesthetic and functional donor-site closure of the anterolateral thigh flap. J Plast Reconstr Aesthet Surg 2016;69:1116–20. 10.1016/j.bjps.2016.04.026. [DOI] [PubMed] [Google Scholar]
- 20. Mihaly E, Altamirano DE, Tuffaha S, Grayson W. Engineering skeletal muscle: building complexity to achieve functionality. Semin Cell Dev Biol 2021;119:61–9. 10.1016/j.semcdb.2021.04.016. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 21. Hu Z, Jiang Z, Meng S, Liu R, Yang K. Research progress on the osteogenesis-related regulatory mechanisms of human umbilical cord mesenchymal stem cells. Stem Cell Rev Rep 2023;19:1252–67. 10.1007/s12015-023-10521-5. [DOI] [PubMed] [Google Scholar]
- 22. Wang D, Zhang X, Huang S, Liu Y, Fu BS-C, Mak KK-l. et al. Engineering multi-tissue units for regenerative medicine: bone-tendon-muscle units of the rotator cuff. Biomaterials 2021;272:120789. 10.1016/j.biomaterials.2021.120789. [DOI] [PubMed] [Google Scholar]
- 23. Samandari M, Quint J, Rodríguez-delaRosa A, Sinha I, Pourquié O, Tamayol A. Bioinks and bioprinting strategies for skeletal muscle tissue engineering. Adv Mater 2022;34:e2105883. 10.1002/adma.202105883. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 24. Luo W, Liu H, Wang C, Qin Y, Liu Q, Wang J. Bioprinting of human musculoskeletal Interface. Adv Eng Mater 2019;21(7).1900019. 10.1002/adem.201900019. [DOI] [Google Scholar]
- 25. Gilbert-Honick J, Grayson W. Vascularized and innervated skeletal muscle tissue engineering. Advanced Healthcare Materials 2019;9:e1900626. 10.1002/adhm.201900626. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 26. Zhang D, Yan K, Zhou J, Xu T, Xu M, Lin J. et al. Myogenic differentiation of human amniotic mesenchymal cells and its tissue repair capacity on volumetric muscle loss. J Tissue Eng 2019;10:2041731419887100. 10.1177/2041731419887100. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 27. Zhang W, Liu Y, Zhang H. Extracellular matrix: an important regulator of cell functions and skeletal muscle development. Cell & Bioscience 2021;11:65. 10.1186/s13578-021-00579-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 28. Sweeney HL, Hammers DW. Muscle contraction. Cold Spring Harb Perspect Biol 2018;10:a023200. 10.1101/cshperspect.a023200. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 29. Chen Z, Li L, Wu W, Liu Z, Huang Y, Yang L. et al. Exercise protects proliferative muscle satellite cells against exhaustion via the Igfbp7-Akt-mTOR axis. Theranostics 2020;10:6448–66. 10.7150/thno.43577. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 30. Su WH, Wang CJ, Fu HC, Sheng CM, Tsai CC, Cheng JH. et al. Human umbilical cord mesenchymal stem cells extricate bupivacaine-impaired skeletal muscle function via mitigating neutrophil-mediated acute inflammation and protecting against fibrosis. Int J Mol Sci 2019;20:4312. 10.3390/ijms20174312. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 31. Chang B, Liu X. Osteon: structure, turnover, and regeneration. Tissue Eng B Rev 2022;28:261–78. 10.1089/ten.teb.2020.0322. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 32. Ferrigno B, Bordett R, Duraisamy N, Moskow J, Arul MR, Rudraiah S. et al. Bioactive polymeric materials and electrical stimulation strategies for musculoskeletal tissue repair and regeneration. Bioact Mater 2020;5:468–85. 10.1016/j.bioactmat.2020.03.010. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 33. Liu Y, Luo D, Wang T. Hierarchical structures of bone and bioinspired bone tissue engineering. Small 2016;12:4611–32. 10.1002/smll.201600626. [DOI] [PubMed] [Google Scholar]
- 34. Martins-Cruz C, Lopes D, Oliveira MB, Mano JF. Bone physiology as inspiration for tissue regenerative therapies. Biomaterials 2018;185:240–75. 10.1016/j.biomaterials. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 35. Hao Z, Song Z, Huang J, Huang K, Panetta A, Gu Z. et al. The scaffold microenvironment for stem cell based bone tissue engineering. Biomater Sci 2017;5:1382–92. 10.1039/c7bm00146k. [DOI] [PubMed] [Google Scholar]
- 36. Zhang X, Deng C, Qi S. Periosteum containing implicit stem cells: A progressive source of inspiration for bone tissue regeneration. Int J Mol Sci 2024;25:2162. 10.3390/ijms25042162. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 37. Wang Z, Wang Y, Yan J, Zhang K, Lin F, Xiang L. et al. Pharmaceutical electrospinning and 3D printing scaffold design for bone regeneration. Adv Drug Deliv Rev 2021;174:504–34. 10.1016/j.addr.2021.05.007. [DOI] [PubMed] [Google Scholar]
- 38. Duda GN, Geissler S, Checa S, Tsitsilonis S, Petersen A, Schmidt-Bleek K. The decisive early phase of bone regeneration. Nat Rev Rheumatol 2023;19:78–95. 10.1038/s41584-022-00887-0. [DOI] [PubMed] [Google Scholar]
- 39. Salhotra A, Shah HN, Levi B, Longaker MT. Mechanisms of bone development and repair. Nat Rev Mol Cell Biol 2020;21:696–711. 10.1038/s41580-020-00279-w. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 40. Xiong Y, Mi B-B, Lin Z, Hu Y-Q, Yu L, Zha K-K. et al. The role of the immune microenvironment in bone, cartilage, and soft tissue regeneration: from mechanism to therapeutic opportunity. Military Medical Research 2022;9:65. 10.1186/s40779-022-00426-8. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 41. Zhao Y, Peng X, Wang Q, Zhang Z, Wang L, Xu Y. et al. Crosstalk between the neuroendocrine system and bone homeostasis. Endocr Rev 2024;45:95–124. 10.1210/endrev/bnad025. [DOI] [PubMed] [Google Scholar]
- 42. Hashimoto N, Kiyono T, Wada MR, Umeda R, Goto Y-I, Nonaka I. et al. Osteogenic properties of human myogenic progenitor cells. Mech Dev 2008;125:257–69. 10.1016/j.mod.2007.11.004. [DOI] [PubMed] [Google Scholar]
- 43. Schindeler A, Liu R, Little DG. The potential role of muscle in bone repair. J Musculoskelet Neuronal Interact 2010;10:71–6. [PubMed] [Google Scholar]
- 44. Utvag SE, Grundnes O, Reikeras O. Effects of lesion between bone, periosteum and muscle on fracture healing in rats. Acta Orthop Scand 2009;69:177–80. 10.3109/17453679809117623. [DOI] [PubMed] [Google Scholar]
- 45. Utvåg SE, Iversen KB, Grundnes O, Reikerås O. Poor muscle coverage delays fracture healing in rats. Acta Orthop Scand 2002;73:471–4. 10.1080/00016470216315. [DOI] [PubMed] [Google Scholar]
- 46. Harry LE, Sandison A, Pearse MF, Paleolog EM, Nanchahal J. Comparison of the vascularity of Fasciocutaneous tissue and muscle for coverage of open tibial fractures. Plast Reconstr Surg 2009;124:1211–9. 10.1097/PRS.0b013e3181b5a308. [DOI] [PubMed] [Google Scholar]
- 47. Wang XJ, Zhang ZH, Li L, Su YX, Wei L. Quadratus femoris muscle pedicle bone flap transplantation in the treatment of femoral neck fracture for Chinese young and middle-aged patients: A systematic review and meta-analysis. Chin J Traumatol 2017;20:347–51. 10.1016/j.cjtee.2017.07.003. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 48. Wu Y, Song M, Peng G, Xu Y, Li Y, Wei M. et al. Muscle pedicle bone flap transplantation for treating femoral neck fracture in adults: a systematic review. J Orthop Surg Res 2021;16:304. 10.1186/s13018-021-02448-9. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 49. Bbaale D, Mohr C, Lindert J, Allorto N, Mabanza T, Katabogama JB. et al. Barriers and prospects for skin grafting in burn treatment across African countries. Burns 2024;50:1150–9. 10.1016/j.burns.2024.02.012. [DOI] [PubMed] [Google Scholar]
- 50. Fraser SM, Fatayer H, A. R. Lumbar herniation following extended autologous latissimus dorsi breast reconstruction. BMC Surg 2013;13:16. 10.1186/1471-2482-13-16. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 51. Marie PJ. Targeting integrins to promote bone formation and repair. Nat Rev Endocrinol 2013;9:288–95. 10.1038/nrendo.2013.4. [DOI] [PubMed] [Google Scholar]
- 52. Chinipardaz Z, Liu M, Graves DT, Yang S. Role of primary cilia in bone and cartilage. J Dent Res 2022;101:253–60. 10.1177/00220345211046606. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 53. Lei L, Wen Z, Cao M, Zhang H, Ling SK, Fu BS. et al. The emerging role of Piezo1 in the musculoskeletal system and disease. Theranostics 2024;14:3963–83. 10.7150/thno.96959. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 54. Zhou T, Gao B, Fan Y, Liu Y, Feng S, Cong Q. et al. Piezo1/2 mediate mechanotransduction essential for bone formation through concerted activation of NFAT-YAP1-ß-catenin. Elife 2020;9:e52779. 10.7554/eLife.52779. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 55. Boström P, Wu J, Jedrychowski MP, Korde A, Ye L, Lo JC. et al. A PGC1-α-dependent myokine that drives brown-fat-like development of white fat and thermogenesis. Nature 2012;481:463–8. 10.1038/nature10777. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 56. Xue Y, Hu S, Chen C, He J, Sun J, Jin Y. et al. Myokine irisin promotes osteogenesis by activating BMP/SMAD signaling via αV integrin and regulates bone mass in mice. Int J Biol Sci 2022;18:572–84. 10.7150/ijbs.63505. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 57. Hu S, Xue Y, He J, Chen C, Sun J, Jin Y. et al. Irisin recouples osteogenesis and osteoclastogenesis to protect wear-particle-induced osteolysis by suppressing oxidative stress and RANKL production. Biomaterials Science 2021;9:5791–801. 10.1039/d1bm00563d. [DOI] [PubMed] [Google Scholar]
- 58. Junnila RK, List EO, Berryman DE, Murrey JW, Kopchick JJ. The GH/IGF-1 axis in ageing and longevity. Nat Rev Endocrinol 2013;9:366–76. 10.1038/nrendo.2013.67. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 59. Zhu Q, Wang J, Cao D, Peng Q, Zhang X, Li C. et al. Bone marrow-derived IGF-1 orchestrates maintenance and regeneration of the adult skeleton. Proc Natl Acad Sci 2023;120:e2203779120. 10.1073/pnas.2203779120. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 60. Banu J, Wang L, Kalu DN. Effects of increased muscle mass on bone in male mice overexpressing IGF-I in skeletal muscles. Calcif Tissue Int 2003;73:196–201. 10.1007/s00223-002-1072-z. [DOI] [PubMed] [Google Scholar]
- 61. Tagliaferri C, Wittrant Y, Davicco M-J, Walrand S, Coxam V. Muscle and bone, two interconnected tissues. Ageing Res Rev 2015;21:55–70. 10.1016/j.arr.2015.03.002. [DOI] [PubMed] [Google Scholar]
- 62. Park JH, Park KH, Cho S, Choi YS, Seo SK, Lee BS. et al. Concomitant increase in muscle strength and bone mineral density with decreasing IL-6 levels after combination therapy with alendronate and calcitriol in postmenopausal women. Menopause 2013;20:747–53. 10.1097/GME.0b013e31827cabca. [DOI] [PubMed] [Google Scholar]
- 63. Rameshwar P, Sassoli C, Pini A, Chellini F, Mazzanti B, Nistri S. et al. Bone marrow mesenchymal stromal cells stimulate skeletal myoblast proliferation through the paracrine release of VEGF. PLoS One 2012;7:e37512. 10.1371/journal.pone.0037512. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 64. Abreu EL, Stern M, Brotto M. Bone–muscle interactions: ASBMR topical meeting, July 2012. IBMS BoneKEy 2012;9. 10.1038/bonekey.2012.239. [DOI] [Google Scholar]
- 65. Guebitz GM, Nyanhongo GS. Enzymes as green catalysts and interactive biomolecules in wound dressing hydrogels. Trends Biotechnol 2018;36:1040–53. 10.1016/j.tibtech.2018.05.006. [DOI] [PubMed] [Google Scholar]
- 66. Shan BH, Wu FG. Hydrogel-based growth factor delivery platforms: strategies and recent advances. Adv Mater 2023;36:e2210707. 10.1002/adma.202210707. [DOI] [PubMed] [Google Scholar]
- 67. Li Y, Chen X, Fok A, Rodriguez-Cabello JC, Aparicio C. Biomimetic mineralization of Recombinamer-based hydrogels toward controlled morphologies and high mineral density. ACS Appl Mater Interfaces 2015;7:25784–92. 10.1021/acsami.5b07628. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 68. Liu G, Wang L, He Y, Wang L, Deng Z, Liu J. et al. Polydopamine nanosheets doped injectable hydrogel with nitric oxide release and photothermal effects for bacterial ablation and wound healing. Advanced Healthcare Materials 2021;10:e2101476. 10.1002/adhm.202101476. [DOI] [PubMed] [Google Scholar]
- 69. Cheng Q-P, Hsu SH. A self-healing hydrogel and injectable cryogel of gelatin methacryloyl-polyurethane double network for 3D printing. Acta Biomater 2023;164:124–38. 10.1016/j.actbio.2023.04.023. [DOI] [PubMed] [Google Scholar]
- 70. Tateiwa D, Nakagawa S, Tsukazaki H, Okada R, Kodama J, Kushioka J. et al. A novel BMP-2–loaded hydroxyapatite/beta-tricalcium phosphate microsphere/hydrogel composite for bone regeneration. Sci Rep 2021;11:16924. 10.1038/s41598-021-96484-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 71. Abarrategi A, García-Cantalejo J, Moreno-Vicente C, Civantos A, Ramos V, Casado JVS. et al. Gene expression profile on chitosan/rhBMP-2 films: A novel osteoinductive coating for implantable materials. Acta Biomater 2009;5:2633–46. 10.1016/j.actbio.2009.02.031. [DOI] [PubMed] [Google Scholar]
- 72. Cheng L, Chen Z, Cai Z, Zhao J, Lu M, Liang J. et al. Bioinspired functional black phosphorus electrospun Fibers achieving recruitment and biomineralization for staged bone regeneration. Small 2020;16:e2005433. 10.1002/smll.202005433. [DOI] [PubMed] [Google Scholar]
- 73. Johnson CT, Sok MCP, Martin KE, Kalelkar PP, Caplin JD, Botchwey EA. et al. Lysostaphin and BMP-2 co-delivery reduces S. Aureus infection and regenerates critical-sized segmental bone defects. science advance 2019;5:eaaw1228. 10.1126/sciadv.aaw1228. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 74. Chien K-H, Chang Y-L, Wang M-L, Chuang J-H, Yang Y-C, Tai M-C. et al. Promoting induced pluripotent stem cell-driven biomineralization and periodontal regeneration in rats with maxillary-molar defects using injectable BMP-6 hydrogel. Sci Rep 2018;8:114. 10.1038/s41598-017-18415-6. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 75. Sun J, Lyu J, Xing F, Chen R, Duan X, Xiang Z. A biphasic, demineralized, and decellularized allograft bone-hydrogel scaffold with a cell-based BMP-7 delivery system for osteochondral defect regeneration. J Biomed Mater Res A 2020;108:1909–21. 10.1002/jbm.a.36954. [DOI] [PubMed] [Google Scholar]
- 76. Rivera KO, Russo F, Boileau RM, Tomlinson RE, Miclau T, Marcucio RS. et al. Local injections of β-NGF accelerates endochondral fracture repair by promoting cartilage to bone conversion. Sci Rep 2020;10:22241. 10.1038/s41598-020-78983-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 77. Xu J, Li Z, Tower RJ, Negri S, Wang Y, Meyers CA. et al. NGF-p75 signaling coordinates skeletal cell migration during bone repair. Sci Adv 2022;8:eabl5716. 10.1126/sciadv.abl5716. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 78. Wei Z, Volkova E, Blatchley MR, Gerecht S. Hydrogel vehicles for sequential delivery of protein drugs to promote vascular regeneration. Adv Drug Deliv Rev 2019;149-150:95–106. 10.1016/j.addr.2019.08.005. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 79. Lv Z, Hu T, Bian Y, Wang G, Wu Z, Li H. et al. A MgFe-LDH nanosheet-incorporated smart thermo-responsive hydrogel with controllable growth factor releasing capability for bone regeneration. Adv Mater 2022;35:e2206545. 10.1002/adma.202206545. [DOI] [PubMed] [Google Scholar]
- 80. Tang W, Yu Y, Wang J, Liu H, Pan H, Wang G. et al. Enhancement and orchestration of osteogenesis and angiogenesis by a dual-modular design of growth factors delivery scaffolds and 26SCS decoration. Biomaterials 2020;232:119645. 10.1016/j.biomaterials.2019.119645. [DOI] [PubMed] [Google Scholar]
- 81. Min Q, Liu J, Yu X, Zhang Y, Wu J, Wan Y. Sequential delivery of dual growth factors from injectable chitosan-based composite hydrogels. Marine Drugs 2019;17:365. 10.3390/md17060365. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 82. Segredo-Morales E, García-García P, Reyes R, Pérez-Herrero E, Delgado A, Évora C. Bone regeneration in osteoporosis by delivery BMP-2 and PRGF from tetronic–alginate composite thermogel. Int J Pharm 2018;543:160–8. 10.1016/j.ijpharm.2018.03.034. [DOI] [PubMed] [Google Scholar]
- 83. Chen J, Zhou X, Sun W, Zhang Z, Teng W, Wang F. et al. Vascular derived ECM improves therapeutic index of BMP-2 and drives vascularized bone regeneration. Small 2022;18:e2107991. 10.1002/smll.202107991. [DOI] [PubMed] [Google Scholar]
- 84. Yu C, Dou X, Meng L, Feng X, Gao C, Chen F. et al. Structure, rheological properties, and biocompatibility of laponite® cross-linked starch/polyvinyl alcohol hydrogels. Int J Biol Macromol 2023;253:127618. 10.1016/j.ijbiomac.2023.127618. [DOI] [PubMed] [Google Scholar]
- 85. Zhang J, Tong D, Song H, Ruan R, Sun Y, Lin Y. et al. Osteoimmunity-regulating biomimetically hierarchical scaffold for augmented bone regeneration. Adv Mater 2022;34:e2202044. 10.1002/adma.202202044. [DOI] [PubMed] [Google Scholar]
- 86. Choi S, Lee JS, Shin J, Lee MS, Kang D, Hwang NS. et al. Osteoconductive hybrid hyaluronic acid hydrogel patch for effective bone formation. J Control Release 2020;327:571–83. 10.1016/j.jconrel.2020.09.006. [DOI] [PubMed] [Google Scholar]
- 87. Wei Q, Young J, Holle A, Li J, Bieback K, Inman G. et al. Soft hydrogels for balancing cell proliferation and differentiation. ACS Biomaterials Science & Engineering 2020;6:4687–701. 10.1021/acsbiomaterials.0c00854. [DOI] [PubMed] [Google Scholar]
- 88. Chen Y, Sheng W, Lin J, Fang C, Deng J, Zhang P. et al. Magnesium oxide nanoparticle coordinated phosphate-functionalized chitosan injectable hydrogel for osteogenesis and angiogenesis in bone regeneration. ACS Appl Mater Interfaces 2022;14:7592–608. 10.1021/acsami.1c21260. [DOI] [PubMed] [Google Scholar]
- 89. Ji X, Yuan X, Ma L, Bi B, Zhu H, Lei Z. et al. Mesenchymal stem cell-loaded thermosensitive hydroxypropyl chitin hydrogel combined with a three-dimensional-printed poly(ε-caprolactone) /nano-hydroxyapatite scaffold to repair bone defects via osteogenesis, angiogenesis and immunomodulation. Theranostics 2020;10:725–40. 10.7150/thno.39167. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 90. Wang Y, Wang J, Gao R, Liu X, Feng Z, Zhang C. et al. Biomimetic glycopeptide hydrogel coated PCL/nHA scaffold for enhanced cranial bone regeneration via macrophage M2 polarization-induced osteo-immunomodulation. Biomaterials 2022;285:121538. 10.1016/j.biomaterials.2022.121538. [DOI] [PubMed] [Google Scholar]
- 91. Bai B, Liu Y, Huang J, Wang S, Chen H, Huo Y. et al. Tolerant and rapid endochondral bone regeneration using framework-enhanced 3D biomineralized matrix hydrogels. Advanced Science 2023;11:e2305580. 10.1002/advs.202305580. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 92. He Z, Sun C, Ma Y, Chen X, Wang Y, Chen K. et al. Rejuvenating aged bone repair through multihierarchy reactive oxygen species-regulated hydrogel. Adv Mater 2023;36:e2306552. 10.1002/adma.202306552. [DOI] [PubMed] [Google Scholar]
- 93. Zhao Z, Li G, Ruan H, Chen K, Cai Z, Lu G. et al. Capturing magnesium ions via microfluidic hydrogel microspheres for promoting cancellous bone regeneration. ACS Nano 2021;15:13041–54. 10.1021/acsnano.1c02147. [DOI] [PubMed] [Google Scholar]
- 94. Chen C, Li Z, Xu C, Kang M, Lee CS, Aghaloo T. et al. Self-assembled nanocomposite hydrogels as carriers for demineralized bone matrix particles and enhanced bone repair. Advanced Healthcare Materials 2024;13:e2303592. 10.1002/adhm.202303592. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 95. Wu T, Liu L, Gao Z, Cui C, Fan C, Liu Y. et al. Extracellular matrix (ECM)-inspired high-strength gelatin-alginate based hydrogels for bone repair. Biomaterials Science 2023;11:2877–85. 10.1039/d3bm00213f. [DOI] [PubMed] [Google Scholar]
- 96. Li Y, Yang G, Wang Y, Li Y, Zhang S, Li R. et al. Osteoimmunity-regulating nanosilicate-reinforced hydrogels for enhancing osseointegration. J Mater Chem B 2023;11:9933–49. 10.1039/d3tb01509b. [DOI] [PubMed] [Google Scholar]
- 97. Lee M, Seo D, Park J, Lee SH, Jeon J, Kim W. et al. Wet tissue adhesive polymeric powder hydrogels for skeletal muscle regeneration. Bioactive Materials 2024;40:334–44. 10.1016/j.bioactmat.2024.06.017. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 98. Yuan Y, Zhang Z, Mo F, Yang C, Jiao Y, Wang E. et al. A biomaterial-based therapy for lower limb ischemia using Sr/Si bioactive hydrogel that inhibits skeletal muscle necrosis and enhances angiogenesis. Bioactive Materials 2023;26:264–78. 10.1016/j.bioactmat.2023.02.027. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 99. Carleton MM, Sefton MV. Injectable and degradable methacrylic acid hydrogel alters macrophage response in skeletal muscle. Biomaterials 2019;223:119477. 10.1016/j.biomaterials.2019.119477. [DOI] [PubMed] [Google Scholar]
- 100. Wu P, Shen L, Liu HF, Zou XH, Zhao J, Huang Y. et al. The marriage of immunomodulatory, angiogenic, and osteogenic capabilities in a piezoelectric hydrogel tissue engineering scaffold for military medicine. Mil Med Res 2023;10:35. 10.1186/s40779-023-00469-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 101. Zheng T, Pang Y, Zhang D, Wang Y, Zhang X, Leng H. et al. Integrated piezoelectric/conductive composite Cryogel creates electroactive microenvironment for enhanced bone regeneration. Adv Healthc Mater 2023;12:e2300927. 10.1002/adhm.202300927. [DOI] [PubMed] [Google Scholar]
- 102. Thangadurai M, Ajith A, Budharaju H, Sethuraman S, Sundaramurthi D. Advances in electrospinning and 3D bioprinting strategies to enhance functional regeneration of skeletal muscle tissue. Biomaterials Advances 2022;142:213135. 10.1016/j.bioadv.2022.213135. [DOI] [PubMed] [Google Scholar]
- 103. Xu T, Yang H, Yang D, Yu Z-Z. Polylactic acid nanofiber scaffold decorated with chitosan Islandlike topography for bone tissue engineering. ACS Appl Mater Interfaces 2017;9:21094–104. 10.1021/acsami.7b01176. [DOI] [PubMed] [Google Scholar]
- 104. Gilbert-Honick J, Ginn B, Zhang Y, Salehi S, Wagner KR, Mao H-Q. et al. Adipose-derived stem/stromal cells on electrospun fibrin microfiber bundles enable moderate muscle reconstruction in a volumetric muscle loss model. Cell Transplant 2018;27:1644–56. 10.1177/0963689718805370. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 105. Al-Baadani MA, Xu L, Cai K, Yie KHR, Shen Y, Al-Bishari AM. et al. Preparation of co-electrospinning membrane loaded with simvastatin and substance P to accelerate bone regeneration by promoting cell homing, angiogenesis and osteogenesis. Materials Today Bio 2023;21:100692. 10.1016/j.mtbio.2023.100692. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 106. Xi K, Gu Y, Tang J, Chen H, Xu Y, Wu L. et al. Microenvironment-responsive immunoregulatory electrospun fibers for promoting nerve function recovery. Nat Commun 2020;11:4504. 10.1038/s41467-020-18265-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 107. Said SS, Yin H, Elfarnawany M, Nong Z, O'Neil C, Leong H. et al. Fortifying angiogenesis in ischemic muscle with FGF9-loaded electrospun poly(Ester amide) Fibers. Advanced Healthcare Materials 2019;8:e1801294. 10.1002/adhm.201801294. [DOI] [PubMed] [Google Scholar]
- 108. Sabzi M, Ranjbar-Mohammadi M, Zhang Q, Kargozar S, Leng J, Akhtari T. et al. Designing triple-shape memory polymers from a miscible polymer pair through dual-electrospinning technique. J Appl Polym Sci 2019;136:47471-47471. 10.1002/app.47471. [DOI] [Google Scholar]
- 109. Liu X, Chen M, Luo J, Zhao H, Zhou X, Gu Q. et al. Immunopolarization-regulated 3D printed-electrospun fibrous scaffolds for bone regeneration. Biomaterials 2021;276:121037. 10.1016/j.biomaterials.2021.121037. [DOI] [PubMed] [Google Scholar]
- 110. Zhang X, Li Q, Li L, Ouyang J, Wang T, Chen J. et al. Bioinspired mild photothermal effect-reinforced multifunctional Fiber scaffolds promote bone regeneration. ACS Nano 2023;17:6466–79. 10.1021/acsnano.2c11486. [DOI] [PubMed] [Google Scholar]
- 111. Wang X, Xie J, Yang L, Lou X-X, Zhang Y. Fabrication of Dex-loaded shape memory polymer based composite nanofibers for potential bone tissue engineering. Journal of Dong hua University 2014;31:5. [Google Scholar]
- 112. Li G, Han Q, Lu P, Zhang L, Zhang Y, Chen S. et al. Construction of dual-biofunctionalized chitosan/collagen scaffolds for simultaneous neovascularization and nerve regeneration. Research 2020;2020:2603048. 10.34133/2020/2603048. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 113. Zhang B, Filion TM, Kutikov AB, Song J. Facile stem cell delivery to bone grafts enabled by smart shape recovery and stiffening of degradable synthetic periosteal membranes. Adv Funct Mater 2016;27. 10.1002/adfm.201604784. [DOI] [Google Scholar]
- 114. Bao M, Wang X, Yuan H, Lou X, Zhao Q, Zhang Y. HAp incorporated ultrafine polymeric fibers with shape memory effect for potential use in bone screw hole healing. J Mater Chem B 2016;4:5308–20. 10.1039/c6tb01305h. [DOI] [PubMed] [Google Scholar]
- 115. Qi J, Zhang J, Jia H, Guo X, Yue Y, Yuan Y. et al. Synthesis of silver/Fe3O4@chitosan@polyvinyl alcohol magnetic nanoparticles as an antibacterial agent for accelerating wound healing. Int J Biol Macromol 2022;221:1404–14. 10.1016/j.ijbiomac.2022.09.030. [DOI] [PubMed] [Google Scholar]
- 116. Shi R, Ye J, Li W, Zhang J, Li J, Wu C. et al. Infection-responsive electrospun nanofiber mat for antibacterial guided tissue regeneration membrane. Mater Sci Eng C 2019;100:523–34. 10.1016/j.msec.2019.03.039. [DOI] [PubMed] [Google Scholar]
- 117. Pensa NW, Curry AS, Bonvallet PP, Bellis NF, Rettig KM, Reddy MS. et al. 3D printed mesh reinforcements enhance the mechanical properties of electrospun scaffolds. Biomaterials Research 2019;23:22. 10.1186/s40824-019-0171-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 118. Miszuk J, Liang Z, Hu J, Sanyour H, Hong Z, Fong H. et al. Elastic mineralized 3D electrospun PCL nanofibrous scaffold for drug release and bone tissue engineering. ACS Applied Bio Materials 2021;4:3639–48. 10.1021/acsabm.1c00134. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 119. Liu Z, Wan X, Wang ZL, Li L. Electroactive biomaterials and Systems for Cell Fate Determination and Tissue Regeneration: design and applications. Adv Mater 2021;33:e2007429. 10.1002/adma.202007429. [DOI] [PubMed] [Google Scholar]
- 120. Liu D, Wang X, Gao C, Zhang Z, Wang Q, Pei Y. et al. Biodegradable piezoelectric-conductive integrated hydrogel scaffold for repair of osteochondral defects. Adv Mater 2024;36:e2409400. 10.1002/adma.202409400. [DOI] [PubMed] [Google Scholar]
- 121. Li Y, Fan Y, Zhao S, Cheng B. Ultrasound-triggered piezoelectric polyetheretherketone with boosted osteogenesis via regulating Akt/GSK3β/β-catenin pathway. Journal of Nanobiotechnology 2024;22:539. 10.1186/s12951-024-02814-9. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 122. Ge J, Liu K, Niu W, Chen M, Wang M, Xue Y. et al. Gold and gold-silver alloy nanoparticles enhance the myogenic differentiation of myoblasts through p38 MAPK signaling pathway and promote in vivo skeletal muscle regeneration. Biomaterials 2018;175:19–29. 10.1016/j.biomaterials.2018.05.027. [DOI] [PubMed] [Google Scholar]
- 123. Du L, Wu J, Han Y, W. C. Immunomodulatory multicellular scaffolds for tendon-to-bone regeneration. Sci Adv 2024;10:eadk6610. 10.1126/sciadv.adk6610. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 124. Wang J, Wu Y, Li G, Zhou F, Wu X, Wang M. et al. Engineering large-scale self-mineralizing bone organoids with bone matrix-inspired hydroxyapatite hybrid bioinks. Adv Mater 2024;36:e2309875. 10.1002/adma.202309875. [DOI] [PubMed] [Google Scholar]
- 125. Xu T, Rao J, Mo Y, Lam AC, Yang Y, Wong SW. et al. 3D printing in musculoskeletal interface engineering: current progress and future directions. Adv Drug Deliv Rev 2025;219:115552. 10.1016/j.addr.2025.115552. [DOI] [PubMed] [Google Scholar]
- 126. Choudhury S, Joshi A, Agrawal A, Nain A, Bagde A, Patel A. et al. NIR-responsive deployable and self-fitting 4D-printed bone tissue scaffold. ACS Appl Mater Interfaces 2024;16:49135–47. 10.1021/acsami.4c10385. [DOI] [PubMed] [Google Scholar]
- 127. Kirillova A, Maxson R, Stoychev G, Gomillion CT, Ionov L. 4D biofabrication using shape-morphing hydrogels. Adv Mater 2017;29. 10.1002/adma.201703443. [DOI] [PubMed] [Google Scholar]
- 128. Wang C, Yue H, Liu J, Zhao Q, He Z, Li K. et al. Advanced reconfigurable scaffolds fabricated by 4D printing for treating critical-size bone defects of irregular shapes. Biofabrication 2020;12:045025. 10.1088/1758-5090/abab5b. [DOI] [PubMed] [Google Scholar]
- 129. Yi C, Qu S, Wang Y, Qi H, Zhang Y, C. GJ. Optical force brush enabled free-space painting of 4D functional structures. Sci Adv 2023;9:eadg0300. 10.1126/sciadv.adg0300. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 130. Zhang Y, Raza A, Xue YQ, Yang G, Hayat U, Yu J. et al. Water-responsive 4D printing based on self-assembly of hydrophobic protein "zein" for the control of degradation rate and drug release. Bioact Mater 2023;23:343–52. 10.1016/j.bioactmat.2022.11.009. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 131. Regato-Herbella M, Morhenn I, Mantione D, Pascuzzi G, Gallastegui A, Valle ABCDS. et al. ROS-responsive 4D printable acrylic thioether-based hydrogels for smart drug release. Chem Mater 2024;36:1262–72. 10.1021/acs.chemmater.3c02264. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 132. Rana D, Rangel VR, Padmanaban P, Trikalitis VD, Kandar A, Kim HW. et al. Bioprinting of aptamer-based programmable bioinks to modulate multiscale microvascular morphogenesis in 4D. Adv Healthc Mater 2025;14:e2402302. 10.1002/adhm.202402302. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 133. Ma Y, Sun L, Zhang J, Chiang CL, Pan J, Wang X. et al. Exosomal mRNAs for angiogenic-osteogenic coupled bone repair. Adv Sci (Weinh) 2023;10:e2302622. 10.1002/advs.202302622. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 134. Fitzpatrick V, Martin-Moldes Z, Deck A, Torres-Sanchez R, Valat A, Cairns D. et al. Functionalized 3D-printed silk-hydroxyapatite scaffolds for enhanced bone regeneration with innervation and vascularization. Biomaterials 2021;276:120995. 10.1016/j.biomaterials.2021.120995. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 135. Chen C, Shi Q, Li M, Chen Y, Zhang T, Xu Y. et al. Engineering an enthesis-like graft for rotator cuff repair: an approach to fabricate highly biomimetic scaffold capable of zone-specifically releasing stem cell differentiation inducers. Bioact Mater 2022;16:451–71. 10.1016/j.bioactmat.2021.12.021. [DOI] [PMC free article] [PubMed] [Google Scholar]

