Abstract
Centella asiatica extract (CAE) and Marigold extract (ME) have been renowned for centuries in traditional medicine, particularly in Asia, for their wound‐healing, anti‐inflammatory and skin‐regenerative properties. This study presents the formulation and comprehensive evaluation of serums enhanced with these extracts, aiming to harness their bioactive properties for skin health. Serums were selected over creams due to their lightweight, water‐based nature, which ensures faster absorption and enhanced skin penetration of active ingredients. The serums, developed in varying concentrations (0.2%, 0.5% and 1.0%), were assessed for physicochemical properties, stability, bioactivity and skin barrier enhancement. Stability tests confirmed the serums' robustness, maintaining consistent pH (5.0–6.5), viscosity and organoleptic properties over 60 days. The MTT assay revealed that both extracts were non‐cytotoxic, maintaining cell viability above 100%, with formulations containing CAE, demonstrating a concentration‐dependent proliferative effect, reaching nearly 120%. Antibacterial evaluation using the agar well diffusion assay showed that both extracts exhibited considerable activity, with CAE achieving greater inhibition zones, particularly against S. aureus. Antioxidant, anti‐inflammatory and anti‐tyrosinase activities confirmed the strong bioactive potential of both extracts in combating oxidative stress, reducing inflammation, and regulating pigmentation. Skin barrier and permeability studies demonstrated the serums' ability to improve barrier integrity and facilitate active compound delivery. These findings demonstrate the potential of Centella asiatica and Marigold extracts for multifunctional skincare formulations, combining regeneration, hydration, antioxidant and antibacterial benefits.
Keywords: anti‐inflammatory effects, antioxidant properties, anti‐tyrosinase activity, Centella asiatica extract, Marigold extract, skin barrier function
Evaluation of Centella asiatica extract and Marigold extract serums, optimizing their concentrations for antioxidant, anti‐inflammatory, antibacterial, and skin barrier‐enhancing effects. It uniquely combines bioactivity, stability, and permeability assessments, revealing Centella asiatica extract's superior regenerative potential and Marigold extract's enhanced skin penetration.

Résumé
L’extrait de Centella asiatica (ECA) et l’extrait de marigold (EM) sont reconnus depuis des siècles dans la médecine traditionnelle, en particulier en Asie, pour leurs propriétés cicatrisantes, anti‐inflammatoires et régénératives de la peau. Cette étude présente la formulation et l’évaluation approfondie de sérums enrichis avec ces extraits, visant à exploiter leurs propriétés bioactives pour la santé de la peau. Des sérums ont été sélectionnés plutôt que des crèmes en raison de leur nature légère à base d’eau, qui garantit une absorption plus rapide et une meilleure pénétration des principes actifs dans la peau. Les sérums, développés à des concentrations variables (0,2%, 0,5%, 1,0%), ont été évalués en termes de propriétés physicochimiques, de stabilité, de bioactivité et d’amélioration de la barrière cutanée. Des tests de stabilité ont confirmé la robustesse des sérums, qui ont maintenu un pH constant (5,0 à 6,5), une viscosité et leurs propriétés organoleptiques sur 60 jours. Le test MTT a révélé que les deux extraits étaient non cytotoxiques, la viabilité cellulaire étant conservée au‐dessus de 100% avec les formulations contenant de l’ECA, et démontrant un effet prolifératif dépendant de la concentration, atteignant près de 120%. L’évaluation antibactérienne à l’aide du test de diffusion des puits de gélose a montré que les deux extraits présentaient une activité significative, l’ECA atteignant des zones d’inhibition plus importantes, en particulier contre S. aureus. Les activités antioxydantes, anti‐inflammatoires et anti‐tyrosinase ont confirmé le fort potentiel bioactif des deux extraits à lutter contre le stress oxydatif, à réduire l’inflammation et à réguler la pigmentation. Des études sur la barrière cutanée et la perméabilité ont démontré la capacité des sérums à améliorer l’intégrité de la barrière cutanée et à faciliter l’administration du composé actif. Ces résultats démontrent le potentiel des extraits de Centella asiatica et de marigold dans des formulations multifonctionnelles de soins de la peau, associant des propriétés régénératives, hydratantes, antioxydantes et antibactériennes.
INTRODUCTION
The skin, the largest organ of the human body, serves as a vital barrier protecting against environmental aggressors, preventing pathogen entry, regulating temperature and enabling sensory perception [1]. Beyond its protective roles, the skin is essential for maintaining overall health and contributes significantly to an individual's self‐esteem and quality of life [2].
In today's modern environment, the skin faces numerous daily challenges that can compromise its integrity and functionality. Exposure to pollution, ultraviolet (UV) radiation and harsh weather conditions induces oxidative stress and inflammation, accelerating the aging process and leading to issues such as dryness, hyperpigmentation and loss of elasticity [3]. Additionally, lifestyle factors like poor nutrition, inadequate hydration and high levels of psychological stress further exacerbate skin problems, increasing susceptibility to conditions like acne and irritations [4]. These cumulative stressors not only affect the skin's appearance but also diminish its protective capabilities, highlighting the need for effective skincare solutions that can restore and maintain skin health amidst ongoing environmental and lifestyle‐induced challenges [5].
In response to concerns over synthetic chemicals, there is a growing shift towards natural and herbal ingredients in cosmetic and pharmaceutical formulations. Consumers increasingly favour products perceived as safer, sustainable and aligned with a holistic approach to wellness [6]. Herbal extracts are rich in bioactive compounds—such as antioxidants, anti‐inflammatory, and antimicrobial agents— that promote skin health while offering a favourable safety profile, even for sensitive skin [7]. Their multifunctionality allows them to address multiple skin concerns simultaneously, enhancing formulation efficacy. Additionally, the sustainable and eco‐friendly nature of herbal sources meets the demand for ethically produced products, fostering innovation and reducing environmental impact in modern skincare development [8].
Centella asiatica and Calendula officinalis (marigold) are two well‐known botanical extracts widely used in skincare due to their proven efficacy and long history in traditional medicine. These extracts contain active compounds that exhibit antioxidant, anti‐inflammatory, antimicrobial and skin‐regenerative properties, making them ideal candidates for multifunctional cosmetic formulations [9, 10].
Centella asiatica, commonly named as Gotu Kola, is a perennial herb native to Asia, highly regarded for its rich array of bioactive compounds, including asiaticoside and madecassoside [11]. These compounds are renowned for their wound healing, anti‐inflammatory and collagen synthesis‐promoting properties, making gotu kola a valuable ingredient in formulations aimed at skin repair and anti‐aging. Traditionally used in Ayurvedic and Chinese medicine, C. asiatica has gained prominence in modern skincare and pharmaceutical applications due to its ability to enhance skin elasticity, hydration, and overall resilience [12].
On the other hand, Marigold extract is another potent herbal extract celebrated for its therapeutic benefits [9]. It contains active constituents such as triterpenoids and flavonoids, which confer strong anti‐inflammatory, antimicrobial and skin‐soothing effects. Marigold extract is widely used in products designed to treat irritated skin, promote wound healing and provide antimicrobial protection [12]. Its versatility and efficacy make it a preferred choice for addressing various dermatological issues, including redness, acne and minor burns [13]. Despite the promising applications of these herbal extracts, most existing research has focused on their individual effects rather than direct comparisons. While Centella asiatica has been validated for its role in enhancing collagen production and skin hydration, studies comparing its efficacy and stability against other extracts like Marigold are limited. Similarly, although Calendulae flos is well‐known for its antimicrobial and anti‐inflammatory properties, there remains a lack of comparative studies assessing its performance relative to C. asiatica in serum formulations [14].
Another significant gap is the limited exploration of optimal extract concentrations. Most studies evaluate a single concentration, overlooking potential variability in efficacy and stability at different levels. Identifying the balance between bioactive performance and physical stability, such as viscosity, pH and shelf‐life, is critical for developing effective and consumer‐friendly skincare products [15]. Furthermore, the combined impact of extract concentrations on key properties like antioxidant activity, sun protection and anti‐inflammatory effects has not been thoroughly investigated. A comprehensive, comparative evaluation is essential to optimize formulation strategies and maximize the potential of these herbal extracts in serum‐based skincare products.
In this study, serums enriched with Centella asiatica extract and Marigold extract at varying concentrations (0.2%, 0.5% and 1%) were developed and comprehensively evaluated for their potential in skincare applications. Serums were chosen as the formulation type due to their lightweight, water‐based nature, which ensures faster absorption, enhanced skin penetration of active ingredients and suitability for delivering high concentrations of bioactive compounds. A comparative approach was adopted to explore the bioactivity and unique properties of these extracts, focusing on antioxidant, anti‐inflammatory and antibacterial activities, as well as their impact on skin barrier function. Key evaluations included their effects on cell viability using the MTT assay, antibacterial properties via the agar well diffusion method, and their ability to maintain stable formulation properties such as pH, viscosity and spreadability over time. By analysing their distinct contributions, this study aims to provide insights into the optimal use of C. asiatica extract and Marigold extracts in multifunctional skincare formulations targeting skin regeneration, antibacterial protection and overall enhancement of skin health.
MATERIALS AND METHODS
Materials
Centella asiatica extract (CAE) and Marigold extract (ME) in lyophilized form were obtained from the Department of Pharmacognosy and Biomaterials (Poznan University of Medical Sciences, Poland). 2,2‐Diphenyil‐1‐picrylhydrazyl (DPPH) purchased from Tokyo Chemical Industry Co, while sodium hydroxide (NaOH) from Sigma Aldrich Chemical Company and 1,3‐propanediol was obtained from Thermo scientific. Glycerin, xanthan gum, hydroxypropyl methylcellulose (hpmc), ethylenediaminetetraacetic acid (EDTA), phenoxyethanol and ethylhexylglycerin were purchased from AromaLab company (Thessaloniki, Greece).
Total phenolic contents (TPC)
The Folin–Ciocalteu method was used to determine TPC [16]. 200 μL of distilled water, 15 μL of Folin–Ciocalteu reagent, and 60 μL of 20% sodium carbonate solution were added to 25 μL of the extracts or samples or gallic acid solution (with a concentration range of 6.25–100 μg/mL). The plate was incubated for 25 min at room temperature after being agitated for 5 min at 600 rpm in a dark environment. Using the calibration curve for the standard substance, the total gallic acid content in the extracted materials was calculated and expressed as milligrams of gallic acid equivalents (GAE).
Preparation of extract loaded serums
The two extracts, CAE [17] and ME [18], were prepared via methanol‐based extraction and lyophilized to preserve their bioactive compounds, as reported in previous studies, and both were analysed for their total bioactive content and characterized using HPLC.
Xanthan gum (0.2%) and hydroxypropylmethylcellulose (0.8%) were gradually dispersed into the water while stirring continuously to prevent clumping, followed by hydration for 30 min. Separately, the extract, either CAE and ME in three different concentrations as detailed in Table 1, was dissolved in 1,3‐propanediol (4%) and water to enhance solubility. Once the gums were fully hydrated, glycerin (4%) and the extract solution were added to the main vessel, followed by the stabilizer EDTA (0.1%) and the preservatives phenoxyethanol (0.5%) and ethylhexylglycerin (0.5%), ensuring thorough mixing after each addition. After all ingredients were incorporated, a NaOH 20% solution was added dropwise while monitoring the pH, to adjust the serum to the desired pH range of 5.0–6.5. The mixture was then homogenized for 5–10 min at moderate speed to ensure uniformity. Finally, the serum was stirred at low speed to remove air bubbles and transferred into sterilized containers for storage.
TABLE 1.
Formulation composition of reference and extract‐containing serums.
| Components | Blank | CAE‐0.2 (%) | CAE‐0.5 (%) | CAE‐1.0 (%) | ME‐0.2 (%) | ME‐0.5 (%) | ME‐1.0 (%) |
|---|---|---|---|---|---|---|---|
| Aqua (Water) | 89.90 | 89.70 | 89.40 | 88.90 | 89.70 | 89.40 | 88.90 |
| Centella asiatica extract (CAE) | – | 0.20 | 0.50 | 1.0 | – | – | – |
| Marigold extract (ME) | – | – | – | – | 0.20 | 0.50 | 1.0 |
| Glycerin | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 |
| Xanthan gum | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 |
| Hydroxypropyl Methylcellulose (HPMC) | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 | 0.80 |
| 1,3‐Propanediol | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 | 4.00 |
| Disodium EDTA | 0.10 | 0.10 | 0.10 | 0.10 | 0.10 | 0.10 | 0.10 |
| NaOH 20% | qs | qs | qs | qs | qs | qs | qs |
| Phenoxyethanol | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 |
| Ethylhexylglycerin | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 | 0.50 |
Physicochemical characterizations
Rheological characterization
Rheological analysis was carried out using a BGD 157/TS2 rotational rheometer (Biuged Instruments, Guangzhou, China) fitted with an SC4‐27 spindle. The measurements were performed at a controlled temperature of 25.0°C, with rotational speeds of 50, 100, 150 and 200 rpm to assess the viscosity and flow behaviour of the samples. Torque values were carefully monitored to ensure precision and reliability, with the instrument's maximum viscosity capacity recorded at 4166.6 mPa s.
pH measurement
The stability of the serum formulations was assessed by monitoring pH and viscosity at specific intervals: 1, 7, 14, 30, 60 and 90 days of storage at room temperature (RT) after preparation [19]. The pH values were determined using a Microprocessor pH meter (WTW, pH 535, Gemini BV, Apeldoorn, The Netherlands) by immersing the sensor directly into the samples. To ensure accuracy, the average of three consecutive readings was recorded. For the emulsions to be considered stable, pH variations were required to remain within 10% of the initial measurement.
Organoleptic properties
Organoleptic properties refer to the sensory attributes of a formulation, including colour, odour and texture. These characteristics are assessed visually and through tactile or olfactory examination. The colour is observed under natural or standardized light, the odour is evaluated by smelling, and the texture is determined by assessing the formulation's smoothness, uniformity, and feel to the touch. Organoleptic evaluations provide qualitative insights into the acceptability and overall quality of the formulation.
Temperature stability
The temperature stability test is used to assess the physical stability of emulsions under varying temperature conditions. Samples are stored at different temperatures, such as 4°C (cold storage), 25°C (room temperature), and 40°C (accelerated stability), for specific time intervals (e.g., 1, 7, 14 and 30 days). After storage, the samples are inspected for changes in appearance, phase separation, or consistency, which indicate instability. This test helps predict the formulation's behaviour over time under real and extreme conditions.
Surface tension measurement
The surface tension measurement was performed using a KRÜSS Digital Tensiometer, Model K 10 ST Lab (KRÜSS GmbH, Hamburg, Germany), based on the Wilhelmy plate method. Initially, the container (vessel) was sterilized using a flame. Next, the platinum wire‐plate (Wilhelmy type Pt) was heated. The instrument was calibrated with deionized water. The stem was immersed in the liquid, and the measurement was recorded in mN/m. Finally, the same procedure was applied to measure the surface tension of the serum formulations and the blank sample (BS).
Spreadability test
The spreadability test determines the extent of the area covered by the serum when applied to the skin or an affected surface. Pre‐cut filter paper pieces are used for the test. First, the total area of each filter paper (A 1) is measured, and its initial weight (W 1) is recorded. A precise amount of 0.5 g of serum is drawn using a calibrated syringe and dispensed onto the center of the filter paper. Once the serum is applied, a timer is started, allowing the serum to spread uniformly for 10 min. After the allotted time, the boundary between the saturated (wet) and unsaturated (dry) portions of the filter paper is carefully cut along the line using scissors. The remaining dry portion of the filter paper is weighed, and this weight is recorded as W 2. The diameter of the saturated portion is then measured. If the spread area is not perfectly circular, multiple diameter readings are taken at different points, and the average diameter is calculated. This measurement is recorded as A 2.
The spreadability is expressed as a percentage of the total area of the filter paper using the formula:
| (1) |
Sun protection factor (SPF)
To determine the SPF value, 1 g of the serum formulation was dissolved in 100 mL of ethanol p.a. and filtered to remove any particulates [20]. A volume of 4 mL of the resulting solution was then transferred into a cuvette for analysis using a UV–Vis spectrophotometer (Shimadzu UV Mini‐1240). Measurements were recorded at wavelengths of 290, 295, 300, 305, 310, 315 and 320 nm, using ethanol as the blank. The experiment was conducted in four repetitions to ensure accuracy. The SPF value was calculated using the Mansur equation, as follows:
| (2) |
where CF – correction factor; EE(λ) – Erythemal effect spectrum at wavelength λ; I(λ) – Solar intensity spectrum at wavelength λ; abs(λ) – Absorbance of the sample at wavelength λ.
Biological activity
Antioxidant activity
25 μL of extracts or tested products was mixed with 175 μL of DPPH solution (3.9 mg/50 mL methanol). The reaction mixture was shaken and incubated at room temperature for 30 min in the dark. In comparison to a blank (25 μL of water and 175 μL of methanol), the absorbance of 25 μL of extracts or tested products and 175 μL of methanol was measured at 517 nm (Multiskan GO 1510, Thermo Fisher Scientific, Vantaa, Finland) [16].
Anti‐inflammatory activity
The hyaluronidase inhibition was determined by a turbidimetric method previously published [16]. 25 μL enzyme (30 U/mL of acetate buffer pH 7.0), 25 μL acetate buffer (50 mM, pH 7.0, with 77 mM NaCl and 1 mg/mL of albumin), 15 μL acetate buffer (pH 4.5), and 10 μL extracts or tested products were mixed, and incubated for 10 min at 37°C. Then, 25 μL HA (0.3 mg/mL of acetate buffer pH 4.5) was added and incubated for 45 min at 37°C. The undigested HA was precipitated with the addition of 200 μL 2.5% CTAB in 2% NaOH (pH 12). The mixture was incubated for 10 min at room temperature. The reaction mixture turbidance was measured as the absorbance at λ = 600 nm (Multiskan GO 1510, Thermo Fisher Scientific, Vantaa, Finland). Blanks' composition was already explained.
Anti‐tyrosinase activity
The previously described approach was utilized to test the anti‐tyrosinase activity [16]. In short, a 96‐well plate was filled with 75.0 μL of phosphate buffer (0.1 M; pH = 6.8), 50.0 μL of 192 U/mL tyrosinase solution, and 25.0 μL of the extracts or tested products. At room temperature, the plate was shaken for 10 min. Next, each well received 50.0 μL of L‐DOPA solution, which was then incubated at 25°C for 20 min. The control was made using the water. The sample's blank contained the buffer rather than the L‐DOPA solution, and the control blank had the water in place of the sample and phosphate buffer. After that, the sample's absorbance at wavelength λ = 475 nm was measured (Multiskan GO 1510, Thermo Fisher Scientific, Vantaa, Finland).
Cell viability analysis
Cytotoxicity was evaluated by quantifying cell viability in the presence of each test material using the [3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyl tetrazolium bromide] (MTT) assay [21]. Normal human fibroblasts (NHF) were plated in 96‐well plates at a density of 10 000 cells per well and cultured to approximately 70% confluency. The serums were applied at two concentrations (50 and 25 μL/mL) and incubated for 24 h. Cells cultured without the addition of any sample served as the negative control (CTRL), while a reference serum (REF) was included for comparison. For the MTT assay, after the 24‐h incubation, the medium was removed, and the cells were washed once with PBS. Fresh medium containing MTT at a concentration of 0.5 mg/mL was then added to each well. The plates were incubated at 37°C with 5% CO2 for 4 h, during which intracellular purple formazan crystals formed. After the incubation, the MTT solution was aspirated, and 100 μL of dimethyl sulfoxide (DMSO) was added to dissolve the formazan crystals. The plates were gently agitated for 30 min to ensure complete dissolution.
The optical density (OD) was measured at 570 nm, with normalization to 630 nm, using a UV–vis spectrophotometer (Perkin Elmer, Dresden, Germany). Cell viability was calculated relative to the control using the following formula:
| (3) |
All experiments were conducted in triplicate, and the results were expressed as the mean ± standard deviation.
Antibacterial properties
The Agar well diffusion assay was used to evaluate the antimicrobial activity of the extract‐loaded serums. A bacterial suspension was mixed with soft agar and poured onto Petri dishes, allowing the agar to solidify. The bacterial strains used in this study were Escherichia coli (Gram‐negative) and Staphylococcus aureus (Gram‐positive). Sterile wells were created in the agar using a borer, and 80 μL of each extract‐loaded serum was carefully pipetted into the wells. Gentamycin and Ampicillin were used as controls for E. coli and S. aureus, respectively, by placing the same volume in separate wells. The plates were then incubated at 37°C for 24 h. After incubation, the zones of inhibition were observed and measured in millimetres using a ruler [22]. The inhibition zones of the extract‐loaded serums were measured and recorded for comparison. All experiments were conducted in triplicate, and the results were expressed as the mean ± standard deviation.
Skin barrier and permeability studies
Penetration of active compound
The permeability of the active ingredients from the final serum formulations was investigated using the Skin PAMPA method (skin parallel artificial membrane permeability test). The Skin PAMPA model consists of two 96‐well plates that form a two‐chamber PAMPA sandwich. The upper plate contains the lipid‐impregnated skin‐mimetic membrane. To hydrate the pre‐coated Skin PAMPA™ sandwich plates (Pion Inc.) overnight before use, 200 μL of the hydration solution (Hydration Solution, Pion Inc.) was added to each well. Using the previously developed HPLC methods, the quantity of penetrated asiaticoside from enriched Centella asiatica extract serum [16] or chlorogenic acid from enriched Marigold flower extract serum [23], after 3 h, was measured. The apparent permeability coefficient (P app) was calculated via the following equation:
where V D – donor volume, V A – acceptor volume, C equilibrium – equilibrium concentration , C D – donor concentration, C A – acceptor concentration, S – membrane area, t – incubation time (in seconds).
Transepidermal water loss (TEWL)
TEWL was measured using an open chamber evaporimeter (Tewameter TM Hex, Courage + Khazaka electronic GmbH, Köln, Germany). The probe was placed on the surface of the skin for approximately 15 s until the reading stabilized. The serums were applied to the subjects' faces once every day for 14 days. On the fifteenth day, measurements were taken again.
Statistical analysis
By using PQStat Software version 1.8.4.142 (2022), correlations were examined using principal component analysis (PCA).
RESULTS
Total phenolic contents
The total phenolic content (TPC) serves as a key indicator of the extracts' antioxidant capacity. As shown in Table 2, the significantly higher TPC in serums containing 1.0% CAE (18.87 mg GAE/mL) and 1.0% ME (16.63 mg GAE/mL) compared to lower concentrations and the reference serum demonstrates the potency of these botanical components.
TABLE 2.
Content of active components.
| TPC [mg GAE/1 mL cream] | |
|---|---|
| Mean ± SD | |
| CAE‐0.2 | 7.26 ± 0.15e |
| CAE‐0.5 | 12.44 ± 0.40c |
| CAE‐1.0 | 18.87 ± 1.00a |
| ME‐0.2 | 6.67 ± 0.34e |
| ME‐0.5 | 10.91 ± 0.55d |
| ME‐1.0 | 16.63 ± 0.73b |
| BS | 0.11 ± 0.01f |
| CAE | 49.05 ± 0.05 mg GAE/1 g plant material |
| ME | 36.02 ± 1.82 mg GAE/1 g plant material |
Note: Mean values within a column with the same letter are not significantly different at p = 0.05 using Duncan's test.
The plant Centella asiatica is rich in various phytochemicals, the major constituents being triterpenes, flavonoids, and essential oils, which condition further biological effects [24]. Based on literature data, it was proven that TPC depends on the type of extraction performed, the extraction mixtures used (TPC showed a gradual increase with the increase of methanol percentage in the extraction solvent) or the process temperature (TPC was statistically significantly influenced by the temperature of the process) [17, 25]. Biological activity of Marigold flowers is mainly attributed to the presence of secondary metabolites: triterpenes, flavonoids, and carotenoids [18]. Also in this case, a significant influence of the extraction method used on the content of active compounds was demonstrated [23, 26].
Preparation of stable gel matrix for serum formulation
Centella asiatica extract (CAE) and Marigold extract (ME), obtained in lyophilized form, dissolved readily in water and 1,3‐propanediol, simplifying their incorporation into the serum formulations, as shown in Figure 1. These extracts had been previously characterized for their phytochemical composition using established analytical methods in earlier studies [17, 23] respectively. HPMC and XG were used as gelling agents to create a stable and uniform gel matrix. XG provided thickening and stabilizing properties, while HPMC enhanced viscosity and ensured a smooth texture. The gelling agents were hydrated in water with continuous stirring for 30 min to ensure complete swelling. This combination produced a consistent and stable gel matrix, facilitating the uniform incorporation of the dissolved extracts and other components.
FIGURE 1.

Serum formulations containing CAE and ME at three different concentrations, alongside a blank serum.
Physicochemical characterization
The prepared serums underwent extensive physicochemical and functional evaluations, as presented in Table 3. Physicochemical properties included pH, viscosity, surface tension and temperature stability, while functional properties were assessed through spreadability and organoleptic evaluations (colour, odour and texture).
TABLE 3.
Evaluation of physical and stability properties of formulations.
| Formulation | Organoleptic properties | Surface tension (mN/m ± SDV) | Spreadability (% area ± SDV) |
|---|---|---|---|
| BS | Milky opaque, characteristic odour and smooth texture | 32.381 ± 0.298b | 9.18 ± 0.05f |
| CAE‐0.2 | Light yellow, Characteristic odour and smooth texture | 32.597 ± 0.059b | 8.50 ± 0.05g |
| CAE‐0.5 | Yellow, Characteristic odour and smooth texture | 30.552 ± 0.041d | 10.42 ± 0.05d |
| CAE‐1.0 | Deep‐yellow, characteristic odour and smooth texture | 31.360 ± 0.046c | 16.22 ± 0.05a |
| ME‐0.2 | Light brown, characteristic odour and smooth texture | 29.572 ± 0.087f | 10.24 ± 0.05e |
| ME‐0.5 | Brown, characteristic odour and smooth texture | 33.208 ± 0.056a | 11.00 ± 0.05c |
| ME‐1.0 | Dark brown, characteristic odour and smooth texture | 30.194 ± 0.067e | 15.05 ± 0.05b |
Note: Mean values within a column with the same letter are not significantly different at p = 0.05 using Duncan's test; Temperature stability: no changes observed.
The organoleptic properties, including colour, odour and texture, were consistent across all formulations. The serums exhibited a smooth texture and characteristic odours, with colour intensity increasing proportionally with extract concentration. Formulations with CAE transitioned from light yellow (CAE‐0.2) to deep yellow (CAE‐1.0), while those with marigold ranged from light brown (ME‐0.2) to dark brown (ME‐1.0), as shown in Figure 1. This trend reflects the natural pigmentation of the extracts, which becomes more pronounced at higher concentrations.
The formulations remained stable under temperature variation tests, with no signs of phase separation or sedimentation, as illustrated in Figure 1. These results highlight the successful incorporation of gelling agents and stabilizers, which ensured proper homogenization and maintained the integrity of the formulations under mechanical and environmental stress.
Surface tension values ranged from 29.572 mN/m (CF‐0.2) to 33.208 mN/m (CF‐0.5), with slight variations among formulations. The differences are attributed to the presence and concentration of the extracts, which influenced the interfacial properties. These values suggest that the formulations are well suited for skin application, as they maintain surface properties that promote even distribution.
Spreadability increased with higher extract concentrations, with the highest values observed for CA‐1.0 (16.22% area ± 0.05) and CF‐1.0 (15.05% area ± 0.05). This improvement is likely due to the increased viscosity and cohesive properties imparted by the higher concentrations of the extracts [27]. The results indicate that the serums can effectively spread on the skin, enhancing their usability and consumer appeal [28].
The pH of all formulations (Figure 2) remained stable over 60 days, within the skin‐compatible range of 5.0–6.5. The reference serum (BS) showed the most consistent pH, while formulations with CAE and ME also maintained stability, with only minor variations. Slight pH fluctuations in higher extract concentrations (CA‐1.0 and CF‐1.0) during the initial days were minimal and stabilized over time. Overall, the formulations demonstrated excellent pH stability, reflecting the effective use of gelling agents, stabilizers, and preservatives.
FIGURE 2.

pH stability of reference and extract‐containing serums over 60 days.
Rheological properties are essential for cosmetic serums, as they determine ease of application, stability, and consumer satisfaction [29]. The viscosity of all formulations, measured at various rotational speeds (Figure 3), demonstrated shear‐thinning behaviour, where viscosity decreased with increasing speed. This pseudoplastic property is ideal for cosmetics, ensuring easy application and spreading while maintaining stability at rest. The reference serum (BS) had the highest viscosity, as the absence of active extracts avoided viscosity reduction. Among extract‐containing formulations, higher extract concentrations, particularly in CA‐1.0 and CF‐1.0, further reduced viscosity, likely due to a disruption of the gelling agent network. Overall, the combination of xanthan gum and HPMC provided optimal flow properties for stability and usability.
FIGURE 3.

Viscosity profiles of reference and extract‐containing serums at different rotational speeds.
Evaluation of sun protection factor (SPF)
The SPF values of the serums, shown in Figure 4, demonstrate their UV protection potential. SPF is crucial for skincare, indicating the ability to shield skin from harmful UVB radiation that causes sunburn, aging, and skin cancer, enhancing the multifunctionality of daily‐use formulations [30].
FIGURE 4.

SPF values of reference serum and serums containing different concentrations of CAE and ME.
The SPF values of the formulations increased with the concentration of CAE and ME, with the highest SPF observed in the 1% formulations, both approaching a value of 3. The results suggest that both extracts contribute comparably to UV protection, with only minor differences between them. This may be due to their distinct phytochemical compositions. CF extract contains triterpenoids and flavonoids with light‐absorbing properties, while CA extract offers UV protection indirectly through its antioxidant activity and skin barrier‐strengthening effects. The reference serum (BS) displayed minimal SPF, emphasizing the importance of the extracts in enhancing UV protection. The results demonstrate that these formulations provide mild sun protection, suitable for use in products designed for daily skin defence against environmental aggressors.
Biological activity assessments
Assessment of antioxidant, anti‐inflammatory, and anti‐tyrosinase activities of serum formulations
As indicated above in Table 4, polyphenols are one of the main active compounds in extracts. They are crucial for their ability to neutralize free radicals, protect skin cells from oxidative stress, and delay aging processes [31]. The inhibition of DPPH radical activity is a direct reflection of the serum's free‐radical scavenging potential. The highest activity was observed in serums with 1.0% CAE (67.12%). This result aligns with the TPC findings and underscores the robust antioxidant nature of C. asiatica extract. Oxidative stress is a significant contributor to skin aging, and these results position CAE as a promising ingredient for anti‐aging formulations [32].
TABLE 4.
Biological activity of serums.
| Antioxidant activity | Anti‐inflammatory activity | Anti‐tyrosinase activity | |
|---|---|---|---|
| Inhibition of DPPH radical activity [%] | Inhibition of hyaluronidase activity [%] | Tyrosinase inhibition [%] | |
| Mean ± SD | Mean ± SD | Mean ± SD | |
| CAE‐0.2 | 46.86 ± 1.13c | 22.38 ± 1.74e | 46.25 ± 3.59b,c |
| CAE‐0.5 | 61.29 ± 4.39b | 38.94 ± 3.03c | 49.87 ± 4.25a,b |
| CAE‐1.0 | 67.12 ± 4.30a | 45.90 ± 2.94b | 54.90 ± 4.14a |
| ME‐0.2 | 36.49 ± 3.28d | 32.18 ± 2.21d | 41.98 ± 1.34c |
| ME‐0.5 | 42.88 ± 3.33c | 40.08 ± 3.35c | 43.67 ± 3.71c |
| ME‐1.0 | 47.85 ± 3.72c | 55.52 ± 4.11a | 45.61 ± 2.50c |
| BS | 14.95 ± 1.52e | 22.40 ± 1.89e | 32.81 ± 2.04d |
| CAE | IC50 = 0.99 ± 0.05 mg lyophilized extract/mL | IC50 = 68.78 ± 3.92 mg/mL | IC50 = 46.92 ± 2.39 mg/mL |
| ME | IC50 = 1.43 ± 0.06 mg lyophilized extract/mL | IC50 = 8.57 ± 0.45 mg/mL | IC50 = 65.13 ± 1.62 mg/mL |
Note: Mean values within a column with the same letter are not significantly different at p = 0.05 using Duncan's test.
Hyaluronidase inhibition is a critical measure, as it prevents the enzymatic degradation of hyaluronic acid—a key molecule for skin hydration and elasticity [33]. Serums with 1.0% CAE showed superior activity (45.90%), emphasizing their potential in reducing inflammation‐related skin damage and promoting wound healing. Moreover, the results of animal experiments showed that the C. asiatica extract could effectively decrease related inflammation factors (TNF‐α, IL‐1β, and IL‐4) [34]. The lower but notable inhibition rates for ME‐based serums (e.g., 1.0% ME at 55.52%) suggest that ME also holds promise for treating inflammatory conditions. Based on literature data, Marigold flower extract inhibits pro‐inflammatory cytokines, such as IL‐6, TNF‐α, and interferon‐gamma (IFN‐γ), cyclooxygenase 2 (COX‐2), and subsequent prostaglandin synthesis [34].
Tyrosinase is an enzyme involved in melanin production, and its inhibition is a target for managing hyperpigmentation [35]. The 1.0% CAE serum demonstrated the highest tyrosinase inhibition (54.90%), indicating that CAE can serve as an effective brightening agent. The moderate performance of ME (e.g. 1.0% ME at 45.61%) suggests it could serve as a complementary ingredient in pigmentation‐control formulations.
Cell viability analysis
The MTT assay is a widely used method to assess cell viability and cytotoxicity, providing critical insights into the biocompatibility of materials for biomedical and cosmetic applications [36]. The results of the MTT assay (Figure 5) demonstrate that both CAE and ME‐loaded serums were non‐cytotoxic at the tested concentrations (50 and 25 μL/mL) after 24 h of incubation. Cell viability exceeded 100% relative to the untreated control (CTRL) for all tested samples, indicating that the serums supported cell health. The reference serum (REF) slightly enhanced cell viability compared to the control, confirming its non‐cytotoxic nature and supporting its potential as a biocompatible component in formulations. Among the tested samples, CAE‐loaded serums demonstrated a clear concentration‐dependent effect, with the higher concentration (50 μL/mL) yielding the highest relative cell viability, reaching almost 120%. This indicates that C. asiatica not only maintains cell health but may also stimulate a slight proliferative effect on fibroblasts, making it particularly promising for applications requiring enhanced tissue repair and regeneration. In comparison, ME‐loaded serums also exhibited high cell viability across both concentrations, reaching almost 105%, and demonstrating consistent biocompatibility. According to ISO‐10993‐5‐2009 criteria, a cytotoxic chemical is defined as one in which less than 70% of cells survive after 24 h of exposure [37].
FIGURE 5.

Cell viability of reference and extract‐loaded serums at 24 h using MTT assay.
All tested serums in this study maintained cell viability above this threshold, confirming their non‐cytotoxic nature. Notably, CAE demonstrated a more pronounced proliferative effect, making it a strong candidate for applications requiring enhanced cell viability and proliferation [37].
Antibacterial properties
The agar well diffusion assay is widely used to evaluate the antibacterial properties of materials, providing valuable insights into their potential applications in formulations targeting infections or promoting skin health [37]. As shown in Figure 6a, the antibacterial activity of CAE and ME‐loaded serums was evaluated against E. coli and S. aureus, with the control agents Gentamycin and Ampicillin producing inhibition zones of 12 and 18 mm, respectively. In comparison, both extract‐loaded serums exhibited considerable antibacterial activity, with some variation observed between the two extracts and their effects on the bacterial strains.
FIGURE 6.

Antibacterial properties of extract‐loaded serums against E. coli and S. aureus. (a) Inhibition zone diameters (mm) determined by the agar well diffusion method. (b) Agar plate images showing inhibition zones for CAE and ME‐loaded serums.
CAE‐loaded serums demonstrated slightly higher antibacterial activity than Calendula flos, particularly at higher concentrations. Against E. coli, C. asiatica at 1% (CAE‐1.0) achieved the largest inhibition zone (7.3 mm), indicating moderate efficacy. Against S. aureus, CAE also exhibited higher activity, with inhibition zones reaching 7.1 mm at the same concentration. This suggests that C. asiatica may have more potent antibacterial properties, especially at elevated concentrations, making it a better candidate for combating bacterial infections.
ME‐loaded serums showed consistent, albeit slightly lower, antibacterial activity across concentrations. The inhibition zones ranged from 6.1 to 6.4 mm against E. coli and 5.0 to 6.1 mm against S. aureus. These results indicate that while serums with ME exhibit antibacterial effects, their efficacy is less concentration‐dependent and generally weaker compared to the formulations with CAE. It is worth noting that both extracts were more effective against S. aureus (Gram‐positive) than E. coli (Gram‐negative). This observation is consistent with the general susceptibility of Gram‐positive bacteria to natural plant extracts due to differences in their cell wall structures.
While neither extract matched the controls, both showed promising antibacterial properties, with C. asiatica displaying slightly higher activity. These results suggest potential for use in mild antibacterial applications, particularly in skin care or wound healing formulations. In Figure 6b, representative agar plate images illustrate the inhibition zones formed by CAE and ME‐loaded serums against E. coli and S. aureus, highlighting their antibacterial activity.
Skin barrier and permeability studies
Permeability of active components
The permeability study using the Skin PAMPA method revealed differences in the ability of active compounds to penetrate the skin. As shown in Table 5, the higher permeability of ME‐based serums (e.g. P app = 2.97 × 10−6 cm/s for 1.0% ME serum) compared to CAE‐based serums (P app = 1.96 × 10−6 cm/s for 1.0% CAE serum) may be due to differences in molecular size, hydrophobicity, or interaction with the skin‐mimetic membrane.
TABLE 5.
Permeability of active components from serum.
| P app × 10−6 [cm/s] mean ± SD | |
|---|---|
| Asiaticoside from CAE‐0.2 | 1.92 ± 0.21b |
| Asiaticoside from CAE‐0.5 | 1.93 ± 0.16b |
| Asiaticoside from CAE‐1.0 | 1.96 ± 0.15b |
| Chlorogenic acid from ME‐0.2 | 2.91 ± 0.32a |
| Chlorogenic acid from ME‐0.5 | 2.93 ± 0.15a |
| Chlorogenic acid from ME‐1.0 | 2.97 ± 0.09a |
| Asiaticoside from CAE | 1.68 ± 0.14 [1] |
| Chlorogenic acid from ME | 2.90 ± 0.76 [7] |
Note: Mean values within a column with the same letter are not significantly different at p = 0.05 using Duncan's test.
Transepidermal water loss (TEWL)
Transepidermal water loss (TEWL) is the most widely used objective measurement for assessing the barrier function of skin in healthy individuals [38]. TEWL reduction reflects the serums' ability to enhance the skin barrier function. According to Table 6, in both formulations, a reduction in TEWL was observed, therefore both formulations contain active compounds that have the ability to bind water and thus retain it, indicating improvement in skin properties [39]. The most significant improvement (29.08%) was observed for the 1.0% CAE serum, which aligns with its anti‐inflammatory and hydrating properties. These results suggest that CAE strengthens the skin barrier, which is critical for managing conditions such as eczema, atopic dermatitis, and skin aging [24, 40]. Although ME‐based serums also reduced TEWL, their effect was slightly less pronounced (e.g., 25.58% reduction for 1.0% ME serum). This difference might be due to variations in the mechanism of action or interactions of ME with the skin barrier [41].
TABLE 6.
TEWL values.
| TEWL value [g/m2/h] mean value at the beginning/ mean value after 14 days/change in % ± SD | |
|---|---|
| CAE‐0.2 | 11.85/9.00/24.05 ± 1.02%c |
| CAE‐0.5 | 11.97/8.73/27.06 ± 0.98%b |
| CAE‐1.0 | 11.59/8.22/29.08 ± 1.21%a |
| ME‐0.2 | 11.67/9.14/21.68 ± 0.85%d |
| ME‐0.5 | 11. 95/9.02/24.52 ± 0.96%c |
| ME‐1.0 | 11.72/8.72/25.58 ± 1.02%b,c |
| BS | 11.82/9.62/18.61 ± 1.08%e |
Note: Mean values within a column with the same letter are not significantly different at p = 0.05 using Duncan's test.
PCA analysis
Principal component analysis (PCA) highlighted very strong correlations between TPC, antioxidant (DPPH), anti‐inflammatory, anti‐tyrosinase activities, and TEWL reduction. This suggests that phenolic components not only drive biological activity but also contribute to improved skin barrier function. A very strong correlation is observed between SPF and TPC, which indicates the significant contribution of phenolic components to this protection. The moderate correlation between permeability (PAMPA) and other variables like antioxidant and anti‐inflammatory activities implies that while permeability is essential, it does not fully determine biological efficacy.
PCA analysis additionally indicates other dominant properties of both tested extracts, and all formulations can be divided into two groups, those containing CAE and those containing ME. So, it is therefore worth noting that active compounds play a key role in the biological activity profile of the product. In Figure 7, it demonstrates the grouping of serums based on their physicochemical properties and bioactivities, as revealed by Principal Component Analysis (PCA).
FIGURE 7.

PCA analysis (1 – CAE‐0.2, 2 – CAE‐0.5, 3 – CAE‐1.0, 4 – ME‐0.2, 5 – ME‐0.5, 6 – ME‐1.0, 7 – BS/Reference serum).
DISCUSSION
The findings of this study underscore the relevance of botanical extracts in cosmetic formulations, particularly in enhancing antioxidant, anti‐inflammatory and skin‐protective properties. The incorporation of Centella asiatica extract (CAE) and Marigold extract (ME) into a stable serum formulation demonstrates the potential of plant‐derived bioactive compounds in modern skincare. Given the increasing consumer demand for natural ingredients with scientifically backed efficacy, these extracts present viable alternatives to synthetic additives.
A critical evaluation of these results suggests that while bioactive‐rich formulations offer multiple functional benefits, challenges remain in optimizing their stability, bioavailability, and efficacy. The variability in phenolic content and biological activity observed across formulations highlights the complexity of extract standardization. Factors such as extraction methods, solvent composition, and storage conditions significantly influence the concentration and activity of phytochemicals [42]. Future research should focus on refining extraction and stabilization techniques to ensure reproducibility and maximize therapeutic benefits.
Another key consideration is the bioavailability of active compounds. While in vitro assessments confirm antioxidant and anti‐inflammatory properties, the extent to which these compounds penetrate the skin and exert effects at the cellular level remains a critical question. Permeability studies indicate differences in compound absorption, suggesting that formulation strategies must be tailored to enhance skin penetration without compromising stability [43]. Novel delivery systems, such as encapsulation in lipid‐based carriers or polymeric nanoparticles, could further improve the targeted release of these actives [44].
The mild SPF enhancement observed in the study suggests that botanical extracts can contribute to UV protection, though not as standalone sunblocks. Rather, they may serve as complementary agents in broader photoprotective formulations. The correlation between phenolic content and SPF values supports the hypothesis that polyphenols provide indirect UV protection through antioxidant and anti‐inflammatory mechanisms [45]. Exploring synergistic combinations with UV filters could enhance the sun‐protective potential of these serums. Beyond their cosmetic benefits, the observed antibacterial activity of CAE and ME highlights potential applications in dermatological treatments. The effectiveness of these extracts against common skin pathogens suggests their suitability for formulations targeting acne, wound healing, and barrier restoration. However, further studies are needed to determine their efficacy in real‐world conditions, including assessments on human skin microbiota and long‐term antimicrobial effects.
A broader implication of this study is the role of natural extracts in promoting sustainable and biocompatible skincare. With growing concerns about the environmental impact of synthetic ingredients, plant‐derived bioactives offer a promising alternative [46]. However, ethical and ecological considerations, such as the sourcing and cultivation of medicinal plants, must be addressed to ensure sustainable production [47].
In conclusion, while CAE and ME demonstrate significant potential in skincare formulations, their full integration into commercial products requires further refinement in extraction techniques, formulation design, and bioavailability enhancement. Future research should also explore synergistic interactions with other natural or synthetic ingredients to optimize their efficacy. The growing intersection of botanical research, biomaterials science, and dermatology presents exciting opportunities for developing next‐generation skincare solutions that are both effective and sustainable.
CONFLICT OF INTEREST STATEMENT
The authors declare that there are no conflicts of interest.
ACKNOWLEDGEMENTS
The authors have nothing to report.
Bikiaris RE, Paczkowska‐Walendowska M, Koumentakou I, Niti A, Cielecka‐Piontek J, Kyzas GZ. Bioactivity and physicochemical characterization of Centella asiatica and Marigold extract serums: Antioxidant, anti‐inflammatory, anti‐tyrosinase and skin barrier function insights. Int J Cosmet Sci. 2025;47:1070–1084. 10.1111/ics.70006
Contributor Information
Ioanna Koumentakou, Email: ikoument@chem.duth.gr.
George Z. Kyzas, Email: kyzas@chem.duth.gr.
DATA AVAILABILITY STATEMENT
The data that support the findings of this study are available from the corresponding author upon reasonable request.
REFERENCES
- 1. Walker M. Human skin through the ages. Int J Pharm. 2022;622:121850. 10.1016/j.ijpharm.2022.121850 [DOI] [PubMed] [Google Scholar]
- 2. Mian M, Silfvast‐Kaiser AS, Paek SY, Kivelevitch D, Menter A. A review of the most common dermatologic conditions and their debilitating psychosocial impacts. Int Arch Intern Med. 2019;3:018. 10.23937/2643-4466/1710018 [DOI] [Google Scholar]
- 3. Naidoo K, Birch‐Machin MA. Oxidative stress and ageing: the influence of environmental pollution, sunlight and diet on skin. Cosmet. 2017;4:4. 10.3390/cosmetics4010004 [DOI] [Google Scholar]
- 4. Hu S, Anand P, Laughter M, Maymone MBC, Dellavalle RP. Holistic dermatology: an evidence‐based review of modifiable lifestyle factor associations with dermatologic disorders. J Am Acad Dermatol. 2022;86:868–877. 10.1016/j.jaad.2020.04.108 [DOI] [PubMed] [Google Scholar]
- 5. Parrado C, Mercado‐Saenz S, Perez‐Davo A, Gilaberte Y, Gonzalez S, Juarranz A. Environmental stressors on skin aging. Mechanistic insights. Front Pharmacol. 2019;10:759. 10.3389/fphar.2019.00759 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 6. Camilleri MA, Cricelli L, Mauriello R, Strazzullo S. Consumer perceptions of sustainable products: a systematic literature review. Sustainability. 2023;15:10178. 10.3390/su15118923 [DOI] [Google Scholar]
- 7. Kumar V. Perspective of natural products in skincare. Pharm Pharmacol Int J. 2016;4:339–341. 10.15406/ppij.2016.04.00072 [DOI] [Google Scholar]
- 8. Sasounian R, Martinez RM, Lopes AM, Giarolla J, Rosado C, Magalhães WV, et al. Innovative approaches to an eco‐friendly cosmetic industry: a review of sustainable ingredients. Clean Technol. 2024;6:176–198. 10.3390/cleantechnol6010011 [DOI] [Google Scholar]
- 9. Silva D, Ferreira MS, Sousa‐Lobo JM, Cruz MT, Almeida IF. Anti‐inflammatory activity of Calendula officinalis L. flower extract. Cosmetics. 2021;8:31. 10.3390/cosmetics8020031 [DOI] [Google Scholar]
- 10. Baitee NA. Comparative antioxidant and anti‐inflammatory activity of different extracts of Centella asiatica (L.) urban and its active compounds, asiaticoside and madecassoside. 2012.
- 11. Bandopadhyay S, Mandal S, Ghorai M, Jha NK, Kumar M, Radha A, et al. Therapeutic properties and pharmacological activities of asiaticoside and madecassoside: a review. J Cell Mol Med. 2023;27:593–608. 10.1111/jcmm.17635 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 12. Wasli AL, Wan Ismail WA, Zamery MI. Review on pharmacological and potential cosmeceutical values of Centella asiatica (Pegaga). Int J Pharm Nutraceut Cosmet Sci. 2022;5:13–32. 10.24191/ijpnacs.v5i1.02 [DOI] [Google Scholar]
- 13. Verma PK, Raina R, Agarwal S, Kour H. Phytochemical ingredients and pharmacological potential of Calendula officinalis Linn. Pharm Biomed Res. 2018;4:1–17. [Google Scholar]
- 14. Cardozo MF, Bhat V, Nayak R. Formulation and evaluation of cream containing Calendula officinalis and Centella asiatica aqueous extracts. J Biol Sci Opin. 2022;10:85–88. 10.7897/2321-6328.106169 [DOI] [Google Scholar]
- 15. Stephane P. Stability of cosmetic formulations containing UV filters and preservatives, based on physical and chemical parameters. MOJ Toxicol. 2015;1:00001. 10.15406/mojt.2015.01.00003 [DOI] [Google Scholar]
- 16. Paczkowska‐Walendowska M, Gościniak A, Szymanowska D, Szwajgier D, Baranowska‐Wójcik E, Szulc P, et al. Blackberry leaves as new functional food? Screening antioxidant, anti‐inflammatory and microbiological activities in correlation with phytochemical analysis. Antioxidants. 2021;10:1945. 10.3390/antiox10121945 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 17. Witkowska K, Paczkowska‐Walendowska M, Plech T, Szymanowska D, Michniak‐Kohn B, Cielecka‐Piontek J. Chitosan‐based hydrogels for controlled delivery of asiaticoside‐rich Centella asiatica extracts with wound healing potential. Int J Mol Sci. 2023;24:17229. 10.3390/ijms242417229 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 18. Chanaj‐Kaczmarek J, Paczkowska M, Osmałek T, Kaproń B, Plech T, Szymanowska D, et al. Hydrogel delivery system containing calendulae flos lyophilized extract with chitosan as a supporting strategy for wound healing applications. Pharmaceutics. 2020;12:634. 10.3390/pharmaceutics12070634 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 19. Abdolmaleki K, Mohammadifar MA, Mohammadi R, Fadavi G, Meybodi NM. The effect of pH and salt on the stability and physicochemical properties of oil‐in‐water emulsions prepared with gum tragacanth. Carbohydr Polym. 2016;140:342–348. 10.1016/j.carbpol.2015.12.081 [DOI] [PubMed] [Google Scholar]
- 20. Dutra EA, Da Costa EO, Oliveira DAG, Rosa E, Kedor‐Hackmann ERM, Santoro MIRM. Determination of sun protection factor (SPF) of sunscreens by ultraviolet spectrophotometry. Rev Bras Ciênc Farma. 2004;40:381–385. [Google Scholar]
- 21. Vukašinović M, Pantelić I, Savić S, Cekić N, Vukašinović Sekulić M, Antić Stanković J, et al. Development of a “green” emulsion with a milk protein hydrolysate: an evaluation of rheology, texture, in vitro bioactivity, and safety. Cosmet. 2023;10:162. 10.3390/cosmetics10060162 [DOI] [Google Scholar]
- 22. Sokolonski AR, Amorim CF, Almeida SR, Lacerda LE, Araújo DB, Meyer R, et al. Comparative antimicrobial activity of four different endodontic sealers. Braz J Microbiol. 2023;54:1717–1721. 10.1007/s42770-023-01003-4 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 23. Paczkowska‐Walendowska M, Rosiak N, Plech T, Karpiński TM, Miklaszewski A, Witkowska K, et al. Electrospun nanofibers loaded with Marigold extract based on PVP/HPβCD and PCL/PVP scaffolds for wound healing applications. Materials. 2024;17:1736. 10.3390/ma17081736 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 24. Witkowska K, Paczkowska‐Walendowska M, Garbiec E, Cielecka‐Piontek J. Topical application of Centella asiatica in wound healing: recent insights into mechanisms and clinical efficacy. Pharmaceutics. 2024;16:1252. 10.3390/pharmaceutics16101252 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 25. Sabaragamuwa R, Perera CO. Total triterpenes, polyphenols, flavonoids, and antioxidant activity of bioactive phytochemicals of Centella asiatica by different extraction techniques. Foods. 2023;12:3972. 10.3390/foods12213972 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 26. Ak G, Zengin G, Sinan KI, Mahomoodally MF, Picot‐Allain MCN, Cakir O, et al. A comparative bio‐evaluation and chemical profiles of Calendula officinalis L. extracts prepared via different extraction techniques. Appl Sci (Basel). 2020;10:5920. 10.3390/app10175920 [DOI] [Google Scholar]
- 27. Xiao H, Gong X, Jordan SN, Liang Z, Mak M. Viscosity regulates cell spreading and cell‐extracellular matrix interactions. FEBS J. 2024;292:740–758. 10.1111/febs.17306 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 28. Gore E, Picard C, Savary G. Complementary approaches to understand the spreading behavior on skin of O/W emulsions containing different emollientss. Colloids Surf B Biointerfaces. 2020;193:111132. 10.1016/j.colsurfb.2020.111132 [DOI] [PubMed] [Google Scholar]
- 29. Morávková T, Stern P. Rheological and textural properties of cosmetic emulsions. Appl Rheol. 2011;21:35189. 10.3933/ApplRheol-21-35200 [DOI] [Google Scholar]
- 30. Morocho‐Jácome AL, Freire TB, de Oliveira AC, de Almeida TS, Rosado C, Velasco MVR, et al. In vivo SPF from multifunctional sunscreen systems developed with natural compounds—a review. J Cosmet Dermatol. 2021;20:729–737. 10.1111/jocd.13609 [DOI] [PubMed] [Google Scholar]
- 31. Farhan M. The promising role of polyphenols in skin disorders. Molecules. 2024;29:865. 10.3390/molecules29040865 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 32. Khuanekkaphan M, Noysang C, Khobjai W. Anti‐aging potential and phytochemicals of Centella asiatica, Nelumbo nucifera, and Hibiscus sabdariffa extracts. J Adv Pharm Technol Res. 2020;11:174–178. 10.4103/japtr.JAPTR_79_20 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 33. Papakonstantinou E, Roth M, Karakiulakis G. Hyaluronic acid: a key molecule in skin aging. Dermatoendocrinol. 2012;4:253–258. 10.4161/derm.21923 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 34. Sun B, Wu L, Wu Y, Zhang C, Qin L, Hayashi M, et al. Therapeutic potential of Centella asiatica and its triterpenes: a review. Front Pharmacol. 2020;11:568032. 10.3389/fphar.2020.568032 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 35. Pillaiyar T, Manickam M, Namasivayam V. Skin whitening agents: medicinal chemistry perspective of tyrosinase inhibitors. J Enzyme Inhib Med Chem. 2017;32:403–425. 10.1080/14756366.2016.1256882 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 36. Qi R, Shen M, Cao X, Guo R, Tian X, Yu J, et al. Exploring the dark side of MTT viability assay of cells cultured onto electrospun PLGA‐based composite nanofibrous scaffolding materials. Analyst. 2011;136:2897–2903. 10.1039/c0an01026j [DOI] [PubMed] [Google Scholar]
- 37. Rezaei A, Ehtesabi H. Fabrication of alginate/chitosan nanocomposite sponges using green synthesized carbon dots as potential wound dressing. Mater Today Chem. 2022;24:100910. 10.1016/j.mtchem.2022.100910 [DOI] [Google Scholar]
- 38. Alexander H, Brown S, Danby S, Flohr C. Research techniques made simple: transepidermal water loss measurement as a research tool. J Invest Dermatol. 2018;138:2295–2300.e1. 10.1016/j.jid.2018.09.001 [DOI] [PubMed] [Google Scholar]
- 39. Wróblewska M, Winnicka K. Emollients with natural emulsifier Olivem 1000 as topical formulations for urea or sodium hyaluronate. Acta Pol Pharm Drug Res. 2023;80:977–990. 10.32383/appdr/175847 [DOI] [Google Scholar]
- 40. Yang J, Guo J, Tang P, Yan S, Wang X, Li H, et al. Insights from traditional Chinese medicine for restoring skin barrier functions. Pharmaceuticals. 2024;17:1176. 10.3390/ph17091176 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 41. Kang CH, Rhie SJ, Kim YC. Antioxidant and skin anti‐aging effects of marigold methanol extract. Toxicol Res. 2018;34:31–39. 10.5487/TR.2018.34.1.031 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 42. Li H, Tsao R, Deng Z. Factors affecting the antioxidant potential and health benefits of plant foods. Can J Plant Sci. 2012;92:1101–1111. 10.4141/CJPS2011-239 [DOI] [Google Scholar]
- 43. Ng KW. Penetration enhancement of topical formulations. Pharmaceutics. 2018;10:51. 10.3390/pharmaceutics10020051 [DOI] [PMC free article] [PubMed] [Google Scholar]
- 44. Puglia C, Bonina F. Lipid nanoparticles as novel delivery systems for cosmetics and dermal pharmaceuticals. Expert Opin Drug Deliv. 2012;9:429–441. 10.1517/17425247.2012.666967 [DOI] [PubMed] [Google Scholar]
- 45. Ebrahimzadeh MA, Enayatifard R, Khalili M, Ghaffarloo M, Saeedi M, Charati JY. Correlation between Sun protection factor and antioxidant activity, phenol and flavonoid contents of some medicinal plants. Iran J Pharm Res. 2014;13(3):1041–1047. [PMC free article] [PubMed] [Google Scholar]
- 46. Rasheed HA, Rehman A, Karim A, Al‐Asmari F, Cui H, Lin L. A comprehensive insight into plant‐derived extracts/bioactives: exploring their antimicrobial mechanisms and potential or high‐performance food applications. Food Biosci. 2024;59:104035. 10.1016/j.bio.2024.104035 [DOI] [Google Scholar]
- 47. Alum EU. Sustainable harvesting of medicinal plants: balancing therapeutic benefits with environmental conservation. Agroecol Sustain Food Syst. 2024;49:380–385. 10.1080/21683565.2024.2421948 [DOI] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Data Availability Statement
The data that support the findings of this study are available from the corresponding author upon reasonable request.
