TABLE 1.
Thermodynamic parameters for CO rebinding with the CS° substates of SW Mb
| Log A (s−1)
|
Hpeak (kJ/M)
|
Width (kJ/M)
|
|||||||
|---|---|---|---|---|---|---|---|---|---|
| References | A0 | A1 | A3 | A0 | A1 | A3 | A0 | A1 | A3 |
| This work, 10 atm of xenon, pH 4.8 | 7.9 | 8.2 | 8.5 | 4.1 | 7.8 | 12.2 | 2.7 | 4.4 | 7.6 |
| This work, 10 atm of xenon, pH 7.3 | – | 8.2 | 8.5 | – | 7.8 | 12.2 | – | 4.4 | 7.6 |
| Tetreau et al. (2002), pH 4.8 | 8.1 | 8.7 | 8.8 | 5.6 | 9.9 | 12.6 | 3.0 | 3.0 | 4.9 |
| Tetreau et al. (2002), pH 7.0 | – | 8.9 | 8.7 | – | 9.9 | 12.6 | – | 3.5 | 6.7 |
The widths are the full widths measured at half maximum of the enthalpy distribution. Mean standard deviations are estimated as 0.8 for log A and 1.5 for Hpeak.