Table 2. Photovoltaic parameters of binary OSCsa.
| Active layers | Hybrid interfacial ETL | V OC b [V] | J SC c [mA cm−2] | FFd [%] | PCEe [%] |
|---|---|---|---|---|---|
| PM6: L8-BO | PDINN | 0.877 | 26.10 (25.75) | 80.17 | 18.35 |
| PDINN: 5 wt% 2BN-4 | 0.880 | 26.85 (26.02) | 80.60 | 19.04 | |
| PDINN: 5 wt% 2BN-5 | 0.883 | 26.92 (26.09) | 80.20 | 19.06 | |
| PDINN: 5 wt% 2BN-6 | 0.885 | 27.14 (26.15) | 81.61 | 19.60 |
a
The PDINN electron-transporting layer either without or with 5 wt% B–N compound.
b
Open-circuit voltage (VOC).
c
The measured JSC values from J–V curves and the integrated JSC values from the EQE spectra.
d
The fill factor (FF).
e
The power conversion efficiency (PCE) was calculated as PCE = (VOC × JSC × FF)/Pin, where Pin is the incident light power density, typically set to 100 mW cm−2 under standard AM 1.5 G illumination conditions.