Table 1.
System Hardware Parameters.
| Component | Parameter | Symbol | Value | Unit | Reference |
|---|---|---|---|---|---|
| Battery | Chemistry | — | Li-ion | — | 37 |
| Battery | Nominal voltage | V_nom | 3.7 | V | Typical |
| Battery | Rated capacity | C_bat | 500 | mAh | Typical |
| Battery | Internal resistance | R_int | 0.15 | Ω | Typical |
| Battery | Peukert exponent | k | 1.05 | — | 37 |
| BLE 5.0 Radio | Center frequency | f_c | 2.440 | GHz | 3 |
| BLE 5.0 Radio | Channel bandwidth | B | 2 | MHz | 3 |
| BLE 5.0 Radio | PHY data rate | R_b | 1.0 | Mbps | 3 |
| BLE 5.0 Radio | Max payload (DLE) | L_pkt | 251 | bytes | 3 |
| BLE 5.0 Radio | Rx sensitivity | P_sens | −96 | dBm | 32 |
| BLE 5.0 Radio | Noise figure (Rx) | NF | 7.0 | dB | 32 |
| BLE 5.0 Radio | Design distance | d | 3.0 | m | Assumed |
| BLE 5.0 Radio | Body+indoor path loss | PL_add | 35 | dB | 7,8 |
| ECG Sensor | IC model | — | ADS1293 | — | 36 |
| ECG Sensor | Sampling freq. (MIT-BIH) | f_s | 360 | Hz | 34 |
| ECG Sensor | Sampling freq. (PTB-XL) | f_s | 500 | Hz | 35 |
| ECG Sensor | ADC resolution | N_bits | 12 | bits | 36 |
| MCU (nRF52840) | MCU current (Full mode) | I_MCU, full | 5.20 | mA | 32 |
| MCU (nRF52840) | MCU current (Critical) | I_MCU, crit | 2.10 | mA | 32 |
* Peukert correction applied with k = 1.0537.