Table 3.
Descriptive statistics of tensile bond strength (MPa) for all experimental groups
| Group | Denture Base Material | Reline Material | n | x̄ ± SD | Min | Max |
|---|---|---|---|---|---|---|
| 1 | Conventional PMMA | Molloplast-B | 10 | 2.07 ± 0.34 | 1.67 | 2.78 |
| 2 | Conventional PMMA | GC Reline II Soft | 10 | 1.76 ± 0.15 | 1.50 | 1.95 |
| 3 | Conventional PMMA | Ufi Gel Hard C | 10 | 12.56 ± 2.21 | 7.62 | 14.79 |
| 4 | Milled PMMA | Molloplast-B | 10 | 1.97 ± 0.18 | 1.74 | 2.26 |
| 5 | Milled PMMA | GC Reline II Soft | 10 | 1.92 ± 0.21 | 1.48 | 2.14 |
| 6 | Milled PMMA | Ufi Gel Hard C | 10 | 10.29 ± 1.27 | 8.95 | 12.22 |
| 7 | 3D-printed resin | Molloplast-B | 10 | 2.16 ± 0.34 | 1.70 | 2.85 |
| 8 | 3D-printed resin | GC Reline II Soft | 10 | 1.28 ± 0.16 | 1.07 | 1.60 |
| 9 | 3D-printed resin | Ufi Gel Hard C | 10 | 9.01 ± 1.99 | 6.08 | 11.29 |
SD Standard deviation, x̄ mean