Table 5.
Array removed | lmbr | anovaFix | anovaMix | Conditions affected |
1 | 0.5964 | 0.6461 | 0.5312 | T1/T3 |
2 | 0.7161 | 0.7545 | 0.6559 | T3/T5 |
3 | 0.6713 | 0.8883 | 0.7606 | T5/T6 |
4 | 0.5697 | 0.7883 | 0.6637 | T6/T4 |
5 | 0.4359 | 0.6042 | 0.5534 | T4/T1 |
Mean | 0.5979 | 0.7363 | 0.6330 |
The different methods for which the influence of array failure was assessed are represented in the columns. Each row shows the mean correlation between the corresponding estimated ratios from the complete design and those obtained from a defect design (where one array was removed compared to the complete design). Mean: shows the overall mean correlation for a given method. Lmbr_dye and limmaQual were not evaluated as in this particular case they lose their main differing characteristic compared to lmbr.