Skip to main content
. 2008;16(2):E24–E41. doi: 10.1179/jmt.2008.16.2.24E

TABLE 6.

Diagnostic utility data hip labral lesion tests studied.

Accuracy Sensitivity Specifcity Positive Predictive Value (PPV) Negative Predictive Value (NPV) Positive Likelihood Ratio Negative Likelihood Ratio

Flexion-Adduction Internal Rotation Test
Burnett et al7 0.95(63/66) 0.95 (63/66) NC 1.00 (63/63) 0 (0/3) NC NC
Keeney et al15 0.91 (93/102) 1.00 (93/93) 0 (0/9) 0.91 (93/102) NC 1.00 NC
Beck et al6 1.00 (19/19) 1.00 (19/19) NC 1.00 (19/19) NC NC NC
Ito et al13 0.96 (24/25) 0.96 (24/25) NC 1.00 (24/24) 0 (0/1) NC NC
Kassarjian et al14 1.00 (42/42) 1.00 (42/42) NC 1.00 (42/42) NC NC NC
Beaule et al5 0.97 (35/36) 1.00 (35/35) 0 (0/1) 0.97 (35/36) NC 1.00 NC
Leunig et al18 0.64 (18/28) 1.00 (18/18) 0 (0/10) 0.64 (18/28) NC 1.00 NC
Impingement Provocation Test
Leunig et al19 0.82 (18/22) 1.00 (18/18) 0 (0/4) 0.82 (18/22) NC 1.00 NC
Flexion-Internal Rotation Test
Santori & Villar4 1.00 (76/76) 1.00 (76/76) NC 1.00 (76/76) NC NC NC
Chan et al8 0.83 (25/30) 1.00 (25/25) 0 (0/5) 0.83 (25/30) NC 1.00 NC
1. Gold standard test MRA
2. Gold standard test arthroscopy 0.94 (16/17) 1.00 (16/16) 0 (0/1) 0.94 (16/17) NC 1.00 NC
Petersilge et al21 0.9 (9/10) 1.00 (9/9) 0 (0/1) 0.9 (9/10) NC 1.00 NC
Hase & Ueo12 0.70 (7/10) 1.00 (7/7) 0 (0/3) 0.70 (7/10) NC 1.00 NC
Flexion, Adduction, Axial Compression
Hase & Ueo12 1.00 (10/10) 1.00 (10/10) NC 1.00 (10/10) NC NC NC
Palpation-Posterior to Greater Trochanter
Hase & Ueo12 0.8 (8/10) 0.8 (8/10) NC 1.00 (8/8) 0 (0/2) NC NC
Flexion, Internal Rotation, Axial Compression
Narvani et al2 0.5 (9/18) 0.75 (3/4) 0.43 (6/14) 0.27 (3/11) 0.86 (6/7) 1.32 0.58
Tomas Test
Narvani et al2 ID 0.25 ID ID ID ID ID
MFIR
Suenaga et al22 0.38 (23/60) 0.38 (23/60) NC 1.00 (23/23) 0 (0/37) NC NC
Guanche &Sikkan 1.00 (8/8) 1.00 (8/8) NC 1.00 (8/8) NC NC NC
MFER
Suenaga et al22 0.27 (16/60) 0.38 (23/60) NC 1.00 (16/16) 0 (0/44) NC NC
Fitzgerald Test
Fitzgerald10 0.96 (54/56) 1.00 (54/54) NC 1.00 (54/54) 0 (0/2) NC NC

NC=not calculated; MFIR=maximal fexion-internal rotation; MFER=maximal fexion-external rotation; ID=insufcient data.